☆ 4.8 Article

Tungstate-mediated In-situ Passivation of Grain Boundary Grooves in Perovskite Solar Cells

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Flattening Grain-Boundary Grooves for Perovskite Solar Cells with High Optomechanical Reliability

Mingwei Hao et al.

Summary: This study reveals that the microstructural characteristic of grain-boundary grooves significantly affects the optomechanical reliability and performance of perovskite solar cells. By adding iso-butylammonium chloride additive in the electron-transport layer, the mechanical integrity of the perovskite heterointerface is improved, leading to enhanced charge transport and chemical stability. As a result, high-performance perovskite solar cells with excellent efficiency retention under harsh conditions are achieved.

ADVANCED MATERIALS (2023)

添加到收藏夹

Review Physics, Multidisciplinary

Carrier recombination in CH3NH3PbI3: why is it a slow process?

Abhishek Maiti et al.

Summary: The review critically assesses proposed microscopic processes to explain the slow carrier recombination in MAPbI(3). The interplay between these mechanisms and their contributions to the recombination dynamics are discussed.

REPORTS ON PROGRESS IN PHYSICS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dependence of the Heterogeneity of Grain Boundaries on Adjacent Grains in Perovskites and Its Impact on Photovoltage

Wenlong Yao et al.

Summary: This study uses photoconductive atomic force microscopy to investigate the photocurrent and photovoltage of large-grained perovskites, revealing that photocurrent collection along grain boundaries relies on adjacent grains, showing grain boundary to grain boundary heterogeneity. Additionally, it is found that the photovoltage of grains deduced at specific positions is larger than that of grain boundaries, playing a crucial role in improving photovoltage.

SMALL (2022)

添加到收藏夹

Article Chemistry, Physical

Defects and passivation in perovskite solar cells

Yaobo Li et al.

Summary: This article introduces the advantages of organic-inorganic hybrid perovskite materials and the high power conversion efficiency of perovskite solar cells. It emphasizes the impact of defects caused by low-temperature processes on device performance and discusses defect-passivation strategies as well as challenges in commercializing perovskite solar cells.

SURFACE INNOVATIONS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Ion migration in hybrid perovskites: Classification, identification, and manipulation

Xin Yan et al.

Summary: This paper reviews the recent progress and challenges in ion migration in hybrid perovskites, covering topics such as the source and impact of ion migration, characterization techniques, and strategies for controlling ion migration.

NANO TODAY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells

Zhen Li et al.

Summary: Functionalizing the interfaces of multication and halide perovskite solar cells with an organometallic compound, ferrocenyl-bis-thiophene-2-carboxylate (FcTc(2)), enhances their efficiency and stability. The resulting devices exhibit high performance and stability, as demonstrated by tests and continuous operation.

SCIENCE (2022)

添加到收藏夹

Article Engineering, Environmental

Synergistic effect of amide and fluorine of polymers assist stable inverted perovskite solar cells with fill factor > 83%

Ming Luo et al.

Summary: Exploring hole transporting materials with defect passivation function is an effective method to suppress non-radiative recombination process in perovskite solar cells. In this study, three dopant-free HTMs with multisite defect passivation function were developed, which achieved remarkable efficiency and stability in the optimized devices.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

24.11% High Performance Perovskite Solar Cells by Dual Interfacial Carrier Mobility Enhancement and Charge-Carrier Transport Balance

Yuhong Zhang et al.

Summary: This study employs a dual interfacial modification strategy by placing Nb2CTx nanosheets at the perovskite/CTLs interfaces to improve the performance of perovskite solar cells (PSCs). Electrical simulation shows that Nb2CTx with O terminal groups can efficiently conduct hole current and achieve charge-carrier transport balance in the device. The optimized devices exhibit high power conversion efficiency (PCE), as well as better thermal and light stability.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Facile synthesis of CaWO4 nanoparticles incorporated on porous carbons with improved photocatalytic degradation of tetracycline

Haodong Sun et al.

Summary: The synthesis of porous carbon-supported CaWO4 nanoparticles with excellent photocatalytic performance for the degradation of antibiotics, particularly tetracycline, was successfully achieved in this study. The introduction of porous carbon significantly enhanced the size reduction of CaWO4 particles, increased the specific surface area for better mass transport, and improved visible light utilization. The optimized CaWO4 @C exhibited a degradation rate of 94.56% for tetracycline under visible light irradiation for 60 minutes, and the photocatalytic reaction mechanism was revealed through free radical trapping experiments and electron spin resonance (ESR) techniques.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Machine learning (ML)-assisted optimization doping of KI in MAPbI3solar cells

Sheng Jiang et al.

Summary: Perovskite solar cells have been attracting attention in the PV field for their increasing efficiency. In this study, a machine learning approach was applied to optimize KI doping in MAPbI(3)solar cells, leading to an improved efficiency of 20.91%.

RARE METALS (2021)

添加到收藏夹

Article Engineering, Environmental

Grain boundary defect passivation by in situ formed wide-bandgap lead sulfate for efficient and stable perovskite solar cells

Xiaohui Ma et al.

Summary: The study introduces a multifunctional approach by forming a PbSO4 modification layer at the grain boundaries of perovskite films to enhance the power conversion efficiency and stability of PSCs.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Limits to Electrical Mobility in Lead-Halide Perovskite Semiconductors

Chelsea Q. Xia et al.

Summary: This study shows that polycrystalline films of metal-halide perovskites have electrical performance close to single crystals, with charge-carrier scattering mechanisms dominated by Frohlich scattering and grain-boundary scattering. Considering photon reabsorption can explain the large difference in charge-carrier diffusion lengths between single crystals and films.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

2D PEA2PbI4-3D MAPbI3 Composite Perovskite Interfacial Layer for Highly Efficient and Stable Mixed-Ion Perovskite Solar Cells

Hang Zhai et al.

Summary: This study reports a simple method to combine perovskite heterostructure and passivation layer in a composite perovskite interfacial layer, which can enhance efficiency and stability of solar cells.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Origin, Influence, and Countermeasures of Defects in Perovskite Solar Cells

Yutian Lei et al.

Summary: Defects are considered to be one of the most significant factors affecting the power conversion efficiency and long-term stability of perovskite solar cells. Various methods to reduce defect density and improve device performance and long-term stability are introduced, including additive engineering, surface passivation, and other physical treatments. Further understanding of defects and the development trends of passivation strategies are also discussed.

SMALL (2021)

添加到收藏夹

Article Optics

2D materials for conducting holes from grain boundaries in perovskite solar cells

Peng You et al.

Summary: A unique approach of modifying the edges of perovskite grain boundaries with high-mobility 2D materials can significantly enhance the performance of PSCs by conducting holes from the grain boundaries to the hole transport layers, forming hole channels in the devices. This cost-effective strategy presents a synergistic effect between the 2D flakes and perovskite grain boundaries for improving the photovoltaic performance of PSCs.

LIGHT-SCIENCE & APPLICATIONS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Constructing All-Inorganic Perovskite/Fluoride Nanocomposites for Efficient and Ultra-Stable Perovskite Solar Cells

Youchao Wei et al.

Summary: Organic-inorganic hybrid perovskite solar cells have faced challenges in achieving both high efficiency and long-term stability. A new CsPbI3/CaF2 perovskite/fluoride nanocomposite shows promise in addressing these issues, delivering efficient and ultra-stable performance. By incorporating CaF2 into the crystal lattice of CsPbI3 perovskite, the nanocomposite effectively passivates defects and suppresses ion migration, resulting in improved power conversion efficiency and extended device lifetime compared to control devices.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Revealing the Mechanism behind the Catastrophic Failure of n-i-p Type Perovskite Solar Cells under Operating Conditions and How to Suppress It

Changzeng Ding et al.

Summary: The n-i-p type perovskite solar cells experience catastrophic failure due to shunting at the edge of the device and the influence of silver clusters.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-Induced Type-I Band Alignment at Surface Grain Boundaries for Highly Efficient and Stable Perovskite Solar Cells

Chao Luo et al.

Summary: By controlling the moisture condensation at the surface of perovskite films through constructing an ultralow surface temperature, a beneficial surface type-I band alignment is formed to avoid carrier loss at the film surface. This innovation significantly boosts the power conversion efficiency of solar cells.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Promoting Energy Transfer via Manipulation of Crystallization Kinetics of Quasi-2D Perovskites for Efficient Green Light-Emitting Diodes

Zhenyu Guo et al.

Summary: By manipulating the crystallization kinetics of different-n phases, a more efficient energy transfer in Q-2D perovskites is achieved, leading to highly efficient green LEDs.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Perovskite Solar Cells with Front Surface Gradient

Mingxuan Guo et al.

Summary: The study investigated carrier distribution in halide perovskite solar cells and successfully achieved a gradient structure using perovskite quantum dots, effectively reducing surface recombination without compromising photocurrent. The performance of normal structured hybrid PSCs and MAPbI(3) cells was found to be good, with open-circuit voltages exceeding their respective Shockley-Queisser limits and power conversion efficiencies reaching up to 22.36% and 20.53%, respectively.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Applied

Simultaneous passivation of bulk and interface defects through synergistic effect of anion and cation toward efficient and stable planar perovskite solar cells

Cong Zhang et al.

Summary: The study demonstrates a defect passivation strategy using potassium sulphate (K2SO4) modification, which effectively improves the efficiency and stability of perovskite solar cells by minimizing bulk and interface nonradiative recombination losses.

JOURNAL OF ENERGY CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Physical

Physical Passivation of Grain Boundaries and Defects in Perovskite Solar Cells by an Isolating Thin Polymer

Efrain Ochoa-Martinez et al.

Summary: Depositing PMMA in perovskite solar cells can increase fill factor and absolute efficiency, leading to a physical isolation mechanism that repairs perovskite defects. This approach offers a promising method for enhancing the performance of perovskite solar cells.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Defect activity in metal halide perovskites with wide and narrow bandgap

Yang Zhou et al.

Summary: Metal halide perovskites (MHPs) have huge potential for optoelectronic technologies, but current challenges include insufficient defect tolerance. Recent research focuses on defect activity in high-bandgap and low-bandgap MHPs to address performance and stability issues.

NATURE REVIEWS MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Revealing phase evolution mechanism for stabilizing formamidinium-based lead halide perovskites by a key intermediate phase

Zi-Ang Nan et al.

Summary: This study investigates the phase transition process of FA-based perovskites and identifies a key intermediate, providing insights into the phase evolution and stabilization mechanism. The findings deepen the understanding of the roles of cations and anions in maximizing halogen and cage concentrations, and offer suggestions for fabricating high-performance and stable PCSs by controlling various factors.

CHEM (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Spontaneous interface engineering for dopant-free poly(3-hexylthiophene) perovskite solar cells with efficiency over 24%

Min Ju Jeong et al.

Summary: By incorporating gallium(iii) acetylacetonate into organic hole-transporting materials without additional surface treatment processes, the interface engineering strategy efficiently reduces the recombination loss and enhances the performance of perovskite solar cells. This method significantly improves the power conversion efficiency of PSCs and maintains stability without hygroscopic additives, showing a promising route for high performance and commercialization.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Review Chemistry, Physical

Recent Progresses on Defect Passivation toward Efficient Perovskite Solar Cells

Feng Gao et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Review Nanoscience & Nanotechnology

Minimizing non-radiative recombination losses in perovskite solar cells

Deying Luo et al.

NATURE REVIEWS MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Reducing Surface Halide Deficiency for Efficient and Stable Iodide-Based Perovskite Solar Cells

Wu-Qiang Wu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Resolving spatial and energetic distributions of trap states in metal halide perovskite solar cells

Zhenyi Ni et al.

SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superior Carrier Lifetimes Exceeding 6 μs in Polycrystalline Halide Perovskites

Xiaoyu Yang et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Towards commercialization: the operational stability of perovskite solar cells

Nengxu Li et al.

CHEMICAL SOCIETY REVIEWS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Toward ideal hole transport materials: a review on recent progress in dopant-free hole transport materials for fabricating efficient and stable perovskite solar cells

Xinxing Yin et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Advances in design engineering and merits of electron transporting layers in perovskite solar cells

Han Pan et al.

MATERIALS HORIZONS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Defect suppression and passivation for perovskite solar cells: from the birth to the lifetime operation

Rundong Fan et al.

ENERGYCHEM (2020)

添加到收藏夹

Article Chemistry, Physical

Efficient and Stable Chemical Passivation on Perovskite Surface via Bidentate Anchoring

Hao Zhang et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

添加到收藏夹

Article Chemistry, Physical

Spontaneous grain polymerization for efficient and stable perovskite solar cells

Xiaodong Li et al.

NANO ENERGY (2019)

添加到收藏夹

Article Energy & Fuels

Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells

Nengxu Li et al.

NATURE ENERGY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts

Shuang Yang et al.

SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Accelerated Development of Perovskite-Inspired Materials via High-Throughput Synthesis and Machine-Diagnosis

Shijing Sun et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Physical

Interface Engineering of Graphene/CH3NH3PbI3 Heterostructure for Novel p-i-n Structural Perovskites Solar Cells

Yong-Hua Cao et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

添加到收藏夹

Article Chemistry, Physical

CaI2: a more effective passivator of perovskite films than PbI2 for high efficiency and long-term stability of perovskite solar cells

Chuanliang Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recent Progress on the Long-Term Stability of Perovskite Solar Cells

Qingxia Fu et al.

ADVANCED SCIENCE (2018)

添加到收藏夹

Article Energy & Fuels

Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations

Xiaopeng Zheng et al.

NATURE ENERGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Isomer-Pure Bis-PCBM-Assisted Crystal Engineering of Perovskite Solar Cells Showing Excellent Efficiency and Stability

Fei Zhang et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance?

Fangzhou Liu et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

Correlation of electrochromic properties and oxidation states in nanocrystalline tungsten trioxide

S. Darmawi et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

添加到收藏夹

Article Chemistry, Physical

High efficiency organic/silicon hybrid solar cells with doping-free selective emitter structure induced by a WO3 thin interlayer

Xinhui Mu et al.

NANO ENERGY (2015)

添加到收藏夹

Article Physics, Multidisciplinary

Effect of annealing on structural and optical properties of lead tungstate microcrystals

Pang Hua-Feng et al.

CHINESE PHYSICS B (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.