4.8 Article

Regulated Ion/Electron-Conducting Interphase Enables Stable Zinc-Metal Anodes for Aqueous Zinc-Ions Batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Highly Reversible Zn Metal Anode Stabilized by Dense and Anion-Derived Passivation Layer Obtained from Concentrated Hybrid Aqueous Electrolyte

Bizualem Wakuma Olbasa et al.

Summary: The study introduces a concentrated hybrid aqueous electrolyte as an effective solution to dendrite growth and low coulombic efficiency in zinc anodes. This electrolyte enables dendrite-free zinc plating/stripping with an excellent coulombic efficiency of approximately 100%, surpassing previous values.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Multidisciplinary

Encapsulation of Metallic Zn in a Hybrid MXene/Graphene Aerogel as a Stable Zn Anode for Foldable Zn-Ion Batteries

Jiahui Zhou et al.

Summary: The flexible MXene/graphene scaffold created through an oriented freezing process can effectively inhibit dendritic growth of the zinc-metal anode and form a solid electrolyte interface at the electrode/electrolyte interface, improving battery stability and cycling life.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

Establishing Thermal Infusion Method for Stable Zinc Metal Anodes in Aqueous Zinc-Ion Batteries

Jiahui Zhou et al.

Summary: Metallic zinc is considered an attractive anode material for aqueous energy storage devices due to its low cost, high capacity, and environmentally friendly features. However, dendritic growth and severe side reactions have restricted the development of zinc-metal anodes. In this study, a thermal infusion strategy was used to create a stable composite zinc-based anode. The results showed that this new structure effectively inhibits dendritic growth and passivation, enabling long-cycling life and high capacity retention.

ADVANCED MATERIALS (2022)

Article Nanoscience & Nanotechnology

Ultra-High-Capacity and Dendrite-Free Zinc-Sulfur Conversion Batteries Based on a Low-Cost Deep Eutectic Solvent

Mangwei Cui et al.

Summary: This study addresses the limited specific capacity and Zn dendrites issues in traditional aqueous Zn-ion batteries by utilizing a conversion-type Zn-S battery and low-cost deep eutectic solvent (DES). The optimized electrolyte enables the symmetrical Zn battery to cycle stably for over 3920 hours, achieving an ultrahigh specific capacity of approximately 846 mA h g(S)(-1) and energy density of 259 W h kg(-1) at 0.5 A g(-1). The conversion chemistry of S and ZnS contributes to superior anti-self-discharge behavior, solving long-standing problems in conventional Zn-ion batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Chemistry, Physical

Strategies for the Stabilization of Zn Metal Anodes for Zn-Ion Batteries

Zhehan Yi et al.

Summary: Zinc-ion batteries are considered promising candidates for next-generation energy storage systems due to their high safety, resource availability, and environmental friendliness. However, the instability of the Zn metal anode has hindered their reliable deployment, and efforts have been made to overcome this through electrode structure design, interface modification, and electrolyte/separator optimization. Understanding and categorizing these strategies based on their intrinsic mechanisms are important for the development of novel Zn metal anodes for ZIBs.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Mechanism for Zincophilic Sites on Zinc-Metal Anode Hosts in Aqueous Batteries

Fangxi Xie et al.

Summary: The bonding between zinc ions and zincophilic sites is revealed as the mechanism for suppressing zinc-dendrite formation in the ZMA host, leading to enhanced electrochemical performance. This study highlights the importance of nitrogen zincophilic sites in inhibiting zinc-dendrite growth.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Synergistic Manipulation of Zn2+ Ion Flux and Desolvation Effect Enabled by Anodic Growth of a 3D ZnF2 Matrix for Long-Lifespan and Dendrite-Free Zn Metal Anodes

Yang Yang et al.

Summary: The study successfully developed a Zn@ZnF2 electrode with a multi-functional protective layer by designing a 3D interconnected ZnF2 matrix on the surface of Zn foil. This electrode exhibits stable zinc deposition kinetics and good plating/stripping reversibility, showing potential for practical application in various battery systems.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Redistributing Zn-ion flux by interlayer ion channels in Mg-Al layered double hydroxide-based artificial solid electrolyte interface for ultra-stable and dendrite-free Zn metal anodes

Yang Yang et al.

Summary: Proposing an Mg-Al layered double hydroxide-based artificial solid electrolyte interface (SEI) with Zn-ion diffusion channels successfully addresses the long-standing issues of zinc-ion batteries, achieving stable Zn deposition and improved Coulombic efficiency. Additionally, zinc-ion capacitors paired with Zn@LDH anode and high-loading active carbon cathode demonstrate outstanding cycling stability at high current densities and can achieve an ultralong lifespan.

ENERGY STORAGE MATERIALS (2021)

Article Optics

Optical and conductivity studies of polyvinyl alcohol-MXene (PVA-MXene) nanocomposite thin films for electronic applications

K. H. Tan et al.

Summary: The combination of MXenes with PVA to form nanocomposites thin film using drop-casting technique resulted in increased electrical conductivity of PVA and enhanced optical absorption characteristics, with potential applications in optoelectronics, conductive filler, and electromagnetic absorbers.

OPTICS AND LASER TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Scalable and Controllable Synthesis of Interface-Engineered Nanoporous Host for Dendrite-Free and High Rate Zinc Metal Batteries

Yongling An et al.

Summary: Rechargeable zinc-ion batteries are promising candidates for renewable and safe energy storage systems, but uncontrolled dendrite growth of the zinc anode has been a hindrance. This study developed a scalable and controllable approach to convert commercial titanium foil into 3D porous titanium, which effectively inhibits dendritic growth and ensures stable zinc plating/stripping. The 3D porous titanium also demonstrates good resistance to corrosion, high electrical conductivity, and excellent mechanical properties.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

High-Lithiophilicity Host with Micro/Nanostructured Active Sites based on Wenzel Wetting Model for Dendrite-Free Lithium Metal Anodes

Yang Mei et al.

Summary: The study utilized a lotus-leaf-like carbon nanotube/NiO spheres hybrid structure to improve the wetting behavior between the host and molten lithium, resulting in homogenized lithium deposition and inhibited dendrite growth. The multi-stage structured design led to excellent cycling performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Ultrathin Surface Coating of Nitrogen-Doped Graphene Enables Stable Zinc Anodes for Aqueous Zinc-Ion Batteries

Jiahui Zhou et al.

Summary: By synthesizing a nitrogen-doped graphene oxide film on zinc foil, this study effectively suppresses hydrogen evolution reactions and passivation, improving the electrochemical performance of aqueous Zn-ion batteries. This research provides a new method for enhancing the application of high-specific-energy AZIBs.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Molecular Engineering of Covalent Organic Framework Cathodes for Enhanced Zinc-Ion Batteries

Wenxi Wang et al.

Summary: Covalent organic frameworks (COFs) show promising performance as electrode materials for electrochemical storage, particularly in zinc-ion batteries, when the quinone group is introduced into their structure to enhance Zn2+ storage capability and increase average charge-discharge potential. This study highlights the importance of molecular engineering in improving the practical charge storage performance of COFs.

ADVANCED MATERIALS (2021)

Article Engineering, Environmental

Localizing concentrated electrolyte in pore geometry for highly reversible aqueous Zn metal batteries

Run Xiao et al.

Summary: By accurately controlling the nanopore structure, the aqueous Zn metal electrode can achieve high electrochemical reversibility, showing long-term cycling stability and high Coulombic efficiency, which is more stable than the untreated zinc anode.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Manipulating Crystallographic Orientation of Zinc Deposition for Dendrite-free Zinc Ion Batteries

Jin Cao et al.

Summary: A functional separator composed of cellulose nanofibers and graphene oxide is developed for dendrite-free and stable zinc ion batteries. This separator promotes uniform zinc deposition and significantly enhances the performance of zinc anodes in various types of batteries.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

The ultrathin prenucleation interface-stabilized metal Zn anode toward high-performance flexible Zn-batteries

Jianbo Li et al.

Summary: The study achieved a dendrite-free Zn metal anode by using an ultrathin NH4V4O10 film-modified carbon cloth, which improved the efficiency of Zn uniform deposition. This resulted in superior cycling performance and energy density, providing an effective strategy for constructing long-life and safe flexible ZMB systems.

MATERIALS TODAY ENERGY (2021)

Review Chemistry, Physical

Micronanostructured Design of Dendrite-Free Zinc Anodes and Their Applications in Aqueous Zinc-Based Rechargeable Batteries

Bing-Feng Cui et al.

Summary: Aqueous zinc-based rechargeable batteries are promising due to their low cost, high safety, environmental friendliness, and high energy density, but the formation of zinc dendrites poses serious problems. Understanding the growth process of dendrites and suppressing their formation through strategies like micronanostructured design can help advance the development of high-performance dendrite-free zinc anodes.

SMALL STRUCTURES (2021)

Article Chemistry, Physical

The electrolyte comprising more robust water and superhalides transforms Zn-metal anode reversibly and dendrite-free

Chong Zhang et al.

Summary: The highly concentrated aqueous electrolyte formula reported in this study mitigates hydrogen evolution by transforming water molecules into a more inert state. The electrolyte, primarily composed of ZnCl2 and LiCl salts, strengthens the O-H covalent bonds in water by reducing hydrogen bonding interactions and increasing Zn-Cl superhalides, resulting in an unprecedented >99.7% average Coulombic efficiency of zinc-metal anode. The electrolyte also enables dendrite-free zinc-metal anode plating/stripping cycles for 4000 hours at 2 mA cm(-2), demonstrating high Coulombic efficiency in full cells.

CARBON ENERGY (2021)

Article Chemistry, Multidisciplinary

In situ built interphase with high interface energy and fast kinetics for high performance Zn metal anodes

Yuzhu Chu et al.

Summary: The in situ construction of a composite SEI mainly composed of Zn-3(PO4)(2) and ZnF2 (ZCS) effectively suppresses Zn dendrite growth and accelerates Zn2+ transference and deposition kinetics in aqueous Zn-ion batteries. By taking advantage of the instability of KPF6 in an aqueous environment, an in situ ZCS is successfully built on the Zn anode through a PF6- anion-induced chemical strategy, showing enhanced reversibility and excellent electrochemical performance. This work not only paves a new way for designing a desirable SEI on the Zn anode, but also may guide the interface engineering of other systems to overcome intrinsic defects in constructing favorable interphases.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Ultra-long-life and highly reversible Zn metal anodes enabled by a desolvation and deanionization interface layer†

Xiaotan Zhang et al.

Summary: The CNG membrane, serving as a desolvation layer, effectively prevents water molecules from contacting the zinc anode, thereby delaying water-induced corrosion reactions and promoting redirected zinc deposition through deanionization shock. The flexible and toughened nature of the CNG membrane allows it to withstand strong forces and accommodate surface fluctuations of the zinc anode during plating/stripping processes, resulting in enhanced Coulombic efficiency and extended cycle life.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Review Physics, Multidisciplinary

Two-dimensional MXenes: From morphological to optical, electric, and magnetic properties and applications

Xiantao Jiang et al.

PHYSICS REPORTS-REVIEW SECTION OF PHYSICS LETTERS (2020)

Article Chemistry, Multidisciplinary

An In-Depth Study of Zn Metal Surface Chemistry for Advanced Aqueous Zn-Ion Batteries

Junnan Hao et al.

ADVANCED MATERIALS (2020)

Review Chemistry, Physical

Scientific Challenges for the Implementation of Zn-Ion Batteries

Lauren E. Blanc et al.

Article Chemistry, Multidisciplinary

Manipulating the ion-transfer kinetics and interface stability for high-performance zinc metal anodes

Xuesong Xie et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Review Chemistry, Multidisciplinary

Flexible Zn-Ion Batteries: Recent Progresses and Challenges

Peng Yu et al.

Article Chemistry, Physical

Mixed Ion and Electron-Conducting Scaffolds for High-Rate Lithium Metal Anodes

Wenqing Guo et al.

ADVANCED ENERGY MATERIALS (2019)

Article Multidisciplinary Sciences

Reversible epitaxial electrodeposition of metals in battery anodes

Jingxu Zheng et al.

SCIENCE (2019)

Article Chemistry, Physical

Reduced graphene oxide aerogel as stable host for dendrite-free sodium metal anode

Feng Wu et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Multidisciplinary

Artificial Soft-Rigid Protective Layer for Dendrite-Free Lithium Metal Anode

Rui Xu et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Review Chemistry, Multidisciplinary

Recent Advances in Zn-Ion Batteries

Ming Song et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Multidisciplinary Sciences

Rechargeable nickel-3D zinc batteries: An energy-dense, safer alternative to lithium-ion

Joseph F. Parker et al.

SCIENCE (2017)

Article Multidisciplinary Sciences

Artificial solid electrolyte interphase for aqueous lithium energy storage systems

Jian Zhi et al.

SCIENCE ADVANCES (2017)

Article Electrochemistry

The impact of elastic deformation on deposition kinetics at lithium/polymer interfaces

C Monroe et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Article Multidisciplinary Sciences

Alternative energy technologies

MS Dresselhaus et al.

NATURE (2001)