☆ 4.8 Article

Zinc Single-Atom-Regulated Hard Carbons for High-Rate and Low-Temperature Sodium-Ion Batteries

ADVANCED MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Multidisciplinary Sciences

Electrolyte design for Li-ion batteries under extreme operating conditions

Jijian Xu et al.

Summary: This study introduces an electrolyte design strategy based on soft solvents, which can meet various requirements of the widely used LiNi0.8Mn0.1Co0.1O2 (NMC811)||graphite lithium-ion batteries, such as high voltage, fast charging, wide temperature range for charging/discharging, and non-flammability. This design principle can also prevent lithium plating at low temperatures.

NATURE (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enabling Fast Na+ Transfer Kinetics in the Whole-Voltage-Region of Hard-Carbon Anodes for Ultrahigh-Rate Sodium Storage

Xiuping Yin et al.

Summary: This study reports an ultrafast sodium storage throughout the whole-voltage region by rationally adjusting the physical parameters of hard carbons through a ZnO-assisted etching strategy. It is found that the storage capacity of sodium is related to the p-band center of the carbon material, and the balance between adsorption energy and diffusion barrier is critical in improving charge-storage kinetics. The prepared hard carbon microspheres exhibit high rate performance and unprecedented electrochemical performance at extremely low temperature.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Evolution of a solid electrolyte interphase enabled by FeNX/C catalysts for sodium-ion storage

Huicong Xia et al.

Summary: The structure and chemical engineering of SEI have a vital role in rechargeable batteries, with FeNX/C anodes providing high capacity through mechanisms such as catalyzing reversible conversion of SEIs and storing spin-polarized charges. The FeNX species open novel avenues for the design of conversion-type electrode materials.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Modulating the Graphitic Domains of Hard Carbons Derived from Mixed Pitch and Resin to Achieve High Rate and Stable Sodium Storage

Xiuping Yin et al.

Summary: By coating low-cost pitch on the surface of resin-derived hard carbons, it is possible to produce materials with excellent electrochemical performance at a relatively low pyrolysis temperature, suitable for use in both sodium-ion batteries and potassium-ion batteries.

SMALL (2022)

添加到收藏夹

Review Chemistry, Physical

Emerging Era of Electrolyte Solvation Structure and Interfacial Model in Batteries

Haoran Cheng et al.

Summary: Recent research has shown that not only the solid-electrolyte interphase (SEI) layer but also the metal-ion solvation structure and interfacial model in the electrolyte significantly affect the performance of lithium-ion batteries. In this paper, the authors summarize recent studies on the importance of electrolyte solvation structure, develop a quantitative model, and propose an interfacial model to understand the electrode's performance. These findings may lead to a new era beyond the SEI and have implications for the design and improvement of LIBs.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Integrating Bi@C Nanospheres in Porous Hard Carbon Frameworks for Ultrafast Sodium Storage

Yazhan Liang et al.

Summary: This study investigates a 3D framework superstructure assembled with carbon nanobelt arrays decorated with metallic bismuth nanospheres coated carbon layer as an anode material for sodium-ion batteries (SIBs). The designed anode exhibits high capacity, excellent cycling stability, and high rate capability. The improved sodium-storage ability is attributed to the unique hybrid architecture and the formation of a solid electrolyte interface layer and uniform porous nanostructures during cycling.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

Two-dimensional NbSSe as anode material for low-temperature sodium-ion batteries

Li-Feng Zhou et al.

Summary: The performance of sodium ion batteries at low temperature is limited by slow diffusion of sodium ions within active materials and interfaces. Researchers have developed a strategy to improve the electronic structure and enhance battery performance by introducing interlayer anionic ligands in two-dimensional NbSSe nanoplates. This research provides promising results for the application of sodium ion batteries at low temperatures.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Engineering the Morphology and Microenvironment of a Graphene-Supported Co-N-C Single-Atom Electrocatalyst for Enhanced Hydrogen Evolution

Kang Huang et al.

Summary: A highly efficient graphene-supported Co-N-C catalyst has been reported, which shows significantly improved activity for the hydrogen evolution reaction by optimizing the substrate morphology and the microenvironment of the metal sites.

SMALL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Encapsulation-Based Sodium Storage via Zn-Single-Atom Implanted Carbon Nanotubes

Xin Li et al.

Summary: This study achieves highly reversible encapsulation-based sodium storage by designing a functional hollow carbon nanotube with Zn single atom sites embedded in the carbon shell. The design reduces the nucleation barrier of Na deposition and provides excellent ion/electron transport channels, improving the safety and cycling performance of the sodium metal anode.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Niobium-doped layered cathode material for high-power and low-temperature sodium-ion batteries

Qinhao Shi et al.

Summary: The authors propose a method to improve the performance of P2-type sodium metal oxide cathode materials by niobium doping, and demonstrate their high-efficiency energy storage performance at different temperatures through experiments.

NATURE COMMUNICATIONS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tailoring Nitrogen Terminals on MXene Enables Fast Charging and Stable Cycling Na-Ion Batteries at Low Temperature

Yang Xia et al.

Summary: The authors propose a strategy of tailoring nitrogen terminals on MXene to improve the charging ability and cycle life of sodium-ion batteries at low temperature. The modified MXene exhibits lower energy barriers, higher charging ability, and better cycle stability at low temperature.

NANO-MICRO LETTERS (2022)

添加到收藏夹

Article Chemistry, Physical

Balanced solvation/de-solvation of electrolyte facilitates Li-ion intercalation for fast charging and low-temperature Li-ion batteries

Sheng Lei et al.

Summary: Long charging times and poor low-temperature performance are major challenges for the widespread use of lithium-ion batteries. This study demonstrates a weakly-solvating electrolyte that balances solvation/de-solvation and improves the diffusion and kinetics of lithium ions, enabling fast-charging and low-temperature operation.

NANO ENERGY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Step-by-step desolvation enables high-rate and ultra-stable sodium storage in hard carbon anodes

Ziyang Lu et al.

Summary: The desolvation process plays a crucial role in the diffusion kinetics of sodium ions and the formation of a solid electrolyte interface (SEI). Researchers have found that a 3A zeolite molecular sieve film on the hard carbon anode can effectively reduce the activation energy of the direct desolvation process, leading to improved performance.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Extending the low-temperature operation of sodium metal batteries combining linear and cyclic ether-based electrolyte solutions

Chuanlong Wang et al.

Summary: This study proposes a specific electrolyte formulation for low-temperature operation of non-aqueous sodium-based batteries, which exhibits thermal stability and enables a stable electrode|electrolyte interface at extremely low temperatures. Through a series of experiments and calculations, the mechanisms behind the efficient electrochemical performance at low temperatures are revealed.

NATURE COMMUNICATIONS (2022)

添加到收藏夹

Article Chemistry, Physical

Electrolyte Solvation Engineering toward High-Rate and Low-Temperature Silicon-Based Batteries

Zhang Cao et al.

Summary: Researchers have developed a specialized electrolyte formula that improves the performance of silicon-based batteries at low temperatures. This weakly solvating electrolyte overcomes kinetic barriers and achieves high cycling stability by reducing solvating capability through its unique structure.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Review Nanoscience & Nanotechnology

Functional Electrolytes: Game Changers for Smart Electrochemical Energy Storage Devices

Faxing Wang et al.

Summary: Functional electrolytes are essential for the development of smart Electrochemical Energy Storage (EES) devices. Recent research has focused on developing stimulus-responsive electrolytes, including temperature, mechanical force, voltage, magnetism, and light-responsive electrolytes, as well as electrochromic and self-healing electrolytes. However, there are still challenges in functional electrolyte design and the development of smart EES devices.

SMALL SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Turning on Zn 4s Electrons in a N2-Zn-B2 Configuration to Stimulate Remarkable ORR Performance

Jing Wang et al.

Summary: A newly explored zinc-based single-atom catalyst with a unique N-2-Zn-B-2 configuration demonstrates impressive ORR activity and remarkable long-term stability, achieved through manipulating the s-band by constructing a B,N co-coordinated Zn-B/N-C catalyst.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Low-Temperature Sodium-Ion Full Battery: Superb Kinetics and Cycling Stability

Xianhong Rui et al.

Summary: The development of high-performance sodium-ion batteries that can operate in low-temperature environments is essential for large-scale energy storage. The designed 3D porous foam structures exhibit excellent electrolyte absorption and Na+ transport performance at -20 degrees C, leading to superior cycling stability and fast charging/discharging capabilities.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

MgO-Template Synthesis of Extremely High Capacity Hard Carbon for Na-Ion Battery

Azusa Kamiyama et al.

Summary: High-capacity hard carbon with a reversible capacity of 478 mAh g(-1) is successfully synthesized using MgO-template technique, with nanostructures and synthetic conditions optimized to maximize Na storage properties. Leaching of MgO and carbonization at high temperature result in a large reversible capacity and high Coulombic efficiency of 88% in the first cycle.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Inhibiting Solvent Co-Intercalation in a Graphite Anode by a Localized High-Concentration Electrolyte in Fast-Charging Batteries

Li-Li Jiang et al.

Summary: By utilizing a localized high-concentration electrolyte, a uniform and robust solid electrolyte interphase can be achieved on the graphite surface, leading to fast-charging performance and excellent cycling stability of lithium-ion batteries.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Engineering, Environmental

Tuning microstructures of hard carbon for high capacity and rate sodium storage

Qianzheng Jin et al.

Summary: Hard carbon materials are favored for use as anodes in sodium ion batteries due to their cost-effectiveness, abundance, and high sodium storage capacity. However, the relationship between microstructures and electrochemical behaviors of hard carbon remains unclear, hindering the rational design and customization of structures and morphologies for optimized sodium storage capacities and rates. This study investigates the effects of microstructural evolution on sodium storage behaviors, showing that improving ordering degree and increasing surface area can enhance storage performance. An optimized hard carbon product exhibits excellent reversible capacity and cycling stability, providing guidance for designing high-performance sodium ion battery anodes.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Engineering, Environmental

An ultra-stable anode material for high/low-temperature workable super-fast charging sodium-ion batteries

Yang Tian et al.

Summary: The developed FeSe2/rGO hybrid SIBs show high rate capacity, ultra-stable cycling life, and extremely high initial columbic efficiency, with excellent feasibility in a wide temperature range, making them an ideal rechargeable battery for the next-generation energy storage system.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Boosting low-temperature sodium/potassium storage performance of Bi via novel electrochemical milling process

B. Wang et al.

Summary: The novel electrochemical milling process (EMP) is used to prepare ultrasmall-sized Bi nanoparticles embedded in a three-dimensional porous carbon framework (EMP-Bi@3DCF), showing excellent sodium/potassium storage performance at -20 degrees C. The ultrafast kinetics process is achieved through the ultrasmall sized Bi nanoparticles via EMP and 3D interconnected porous channels, leading to superior rate performances and long cycle life for both NIBs and KIBs at Low-T.

MATERIALS TODAY ENERGY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review on porous carbon materials engineered by ZnO templates: Design, synthesis and capacitance performance

Bing Yan et al.

Summary: Supercapacitors are a cost-effective avenue for energy storage with excellent stability, rate performance, and power densities. Electrode materials, especially porous carbon materials synthesized with nano-ZnO templates, play a crucial role in enhancing capacitance performance. The use of ZnO templates not only facilitates the preparation of porous carbon materials, but also improves the structure-directing role for energy storage applications.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Energy & Fuels

Tailoring electrolyte solvation for Li metal batteries cycled at ultra-low temperature

John Holoubek et al.

Summary: This study highlights the importance of the solvation structure of the electrolyte in charge-transfer behavior at ultra-low temperatures for lithium metal batteries. By designing an electrolyte to enable low-temperature operations, stable performance and high efficiency can be achieved for Li-metal batteries.

NATURE ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Nanometer-size Na cluster formation in micropore of hard carbon as origin of higher-capacity Na-ion battery

Yong Youn et al.

Summary: This study used density functional theory calculations to investigate the origin of high-capacity sodiation in hard carbon, revealing that nanometer-size Na clusters are stable between graphene layers, in addition to adsorption and intercalation mechanisms. The research sheds light on the enhanced capacity mechanism in MgO-templated hard carbon.

NPJ COMPUTATIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Elucidating the Mechanism of Fast Na Storage Kinetics in Ether Electrolytes for Hard Carbon Anodes

Ruiqi Dong et al.

Summary: The sodium storage performance of hard carbon in ether electrolytes is superior, attributed to a unique solvated Na+ and Na+ co-intercalation mechanism in designed monodispersed HC nanospheres. Additionally, a thin solid electrolyte interphase film formed in ether electrolytes facilitates Na+ transportation and results in a high initial Coulombic efficiency.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Increasing Accessible Subsurface to Improving Rate Capability and Cycling Stability of Sodium-Ion Batteries

Bo Yin et al.

Summary: This study reveals that the mechanism for improving the rate capability of carbonaceous anode through heteroatom doping is not as traditionally believed, which is to increase the diffusion-controlled capacity by expanding the interlayer spacing. Instead, it is found that doping has little impact on interlayer spacing in the bulk phase, but can significantly expand the spacing in the subsurface region when syngergized with tensile stress. This leads to improved accessibility of the subsurface region at high current densities, resulting in higher specific capacity and cycling stability for the electrodes.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Desolvation-Free Sodium Dual-Ion Chemistry for High Power Density and Extremely Low Temperature

Jiawei Chen et al.

Summary: The novel desolvation-free sodium dual-ion battery (SDIB) with artificial graphite anode and polytriphenylamine cathode shows exceptional performance in fast charging, low-temperature operation, high power density, and wide temperature range. This advanced battery system opens up new possibilities for designing energy storage devices in the future.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Low-Temperature Electrolyte Design for Lithium-Ion Batteries: Prospect and Challenges

Qian Li et al.

Summary: Studies have shown that in cold regions and seasons, lithium-ion batteries without thermal protection can cause the electrolyte to thicken, reducing the transport capability of Li+ and affecting battery performance and cycle life. Therefore, the design of low-temperature electrolytes has become increasingly important.

CHEMISTRY-A EUROPEAN JOURNAL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrafine ZnSe Encapsulated in Nitrogen-Doped Porous Carbon Nanofibers for Superior Na-Ion Batteries with a Long Lifespan and Low-Temperature Performance

Xuewen Wang et al.

Summary: The ZnSe@NCNF electrode exhibits outstanding sodium-storage performance and superior cycling stability, allowing it to function well in extreme low temperature environments due to its unique structure and components that provide a rapid ion/electron transfer network.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Coordination engineering of metal single atom on carbon for enhanced and robust potassium storage

Fang Liu et al.

Summary: Zinc single atoms were introduced onto hollow carbon spheres to improve potassium storage performance through chemical coordination tuning. PIBs with bicoordinated zinc anodes exhibited high performance suitable for commercial applications, opening a new pathway for the rational design of high-performance carbon materials.

MATTER (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

The Functions and Applications of Fluorinated Interface Engineering in Li-Based Secondary Batteries

Mu-Yao Qi et al.

Summary: This review highlights the importance of surface fluorinated treatment for improving interphase stability in Li-based secondary batteries and discusses the strategies for constructing fluoride-based interfaces. The review also delves into the structure-performance relationship of these interfaces to inspire rational interface engineering, providing insights into possible research directions for further development of rechargeable Li batteries.

SMALL SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Low-Valence Znδ+ (0<δ<2) Single-Atom Material as Highly Efficient Electrocatalyst for CO2 Reduction

Simin Li et al.

Summary: The nitrogen-stabilized single-atom catalyst Zn delta+-NC containing low-valence zinc atoms shows excellent catalytic performance in the electrochemical reduction of CO2 to CO. The unsaturated three-coordinate sites on Zn play a key role in reducing the energy barrier and achieving high CO selectivity. This work sheds light on the relationship between coordination number, valence state, and catalytic performance, with potential industrial applications for high current densities.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Recent Advances on Sodium-Ion Batteries and Sodium Dual-Ion Batteries: State-of-the-Art Na+ Host Anode Materials

Decai Gong et al.

Summary: SIBs and SDIBs, as promising alternatives to LIBs, have lower energy density and cycling life due to the large mass and ionic radius of sodium atoms, but recent progress in anode materials offers hope for improving their electrochemical performance.

SMALL SCIENCE (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

What Is the Right Carbon for Practical Anode in Alkali Metal Ion Batteries?

Jun Zhang et al.

Summary: Carbon materials play a crucial role in alkali metal ion batteries, where the design of carbon anodes requires consideration of storage, coulombic efficiency, and stability criteria; while the design of carbon frameworks for alloy anodes should follow principles of interface cohesion and structural stability to enhance overall stability and performance.

SMALL SCIENCE (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Manipulating Electrode/Electrolyte Interphases of Sodium-Ion Batteries: Strategies and Perspectives

Enhui Wang et al.

Summary: This passage discusses the commercial demands for sodium ion batteries (SIBs) for large-scale energy storage after rapid development over the past decade. It highlights the importance of electrode-electrolyte interphases in determining battery performance and reviews current research and challenging issues related to SIB interphases. The passage also emphasizes the fundamental understanding of interphase layers, interphase manipulation via parental electrolyte, and potential effects from chosen electrodes to build stable Na-based interphase layers for high-energy and long-life-span batteries.

ACS MATERIALS LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

FeP Quantum Dots Confined in Carbon-Nanotube-Grafted P-Doped Carbon Octahedra for High-Rate Sodium Storage and Full-Cell Applications

Shanshan Shi et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Toward Critical Electrode/Electrolyte Interfaces in Rechargeable Batteries

Chong Yan et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hard Carbon Nanosheets with Uniform Ultramicropores and Accessible Functional Groups Showing High Realistic Capacity and Superior Rate Performance for Sodium-Ion Storage

Ji-Li Xia et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nonignorable Influence of Oxygen in Hard Carbon for Sodium Ion Storage

Chen Chen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Physical

Carbon-Microcuboid-Supported Phosphorus-Coordinated Single Atomic Copper with Ultrahigh Content and Its Abnormal Modification to Na Storage Behaviors

Yifan Li et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Ultralow-Concentration Electrolyte for Na-Ion Batteries

Yuqi Li et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

Nanoporous nitrogen doped carbons with enhanced capacity for sodium ion battery anodes

Asad Mehmood et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Using a Dynamic Inhibition Concept to Achieve Content-Controllable Synthesis of N-Coordinated Cu Atoms as Reversible Active Site toward Super Li-Ion Capacitors

Yunyan Xue et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Heteroatom-doped carbon-based materials for lithium and sodium ion batteries

Yu Yuan et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cobalt in Nitrogen-Doped Graphene as Single-Atom Catalyst for High-Sulfur Content Lithium-Sulfur Batteries

Zhenzhen Du et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nonaqueous Sodium-Ion Full Cells: Status, Strategies, and Prospects

Yu-Bin Niu et al.

SMALL (2019)

添加到收藏夹

Article Chemistry, Physical

Uniform Lithium Deposition Assisted by Single-Atom Doping toward High-Performance Lithium Metal Anodes

Pengbo Zhai et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Tailoring FeN4 Sites with Edge Enrichment for Boosted Oxygen Reduction Performance in Proton Exchange Membrane Fuel Cell

Xiaogang Fu et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Heteroatom-Doped Mesoporous Hollow Carbon Spheres for Fast Sodium Storage with an Ultralong Cycle Life

Dan Ni et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Extended Adsorption-Insertion Model: A New Insight into the Sodium Storage Mechanism of Hard Carbons

Ning Sun et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Single-Atom Iron as Lithiophilic Site To Minimize Lithium Nucleation Overpotential for Stable Lithium Metal Full Battery

Yawen Sun et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-Supporting, Flexible, Additive-Free, and Scalable Hard Carbon Paper Self-Interwoven by 1D Microbelts: Superb Room/Low-Temperature Sodium Storage and Working Mechanism

Bao-Hua Hou et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Extended flat voltage profile of hard carbon synthesized using a two-step carbonization approach as an anode in sodium ion batteries

Stevanus Alvin et al.

JOURNAL OF POWER SOURCES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thermally Driven Structure and Performance Evolution of Atomically Dispersed FeN4 Sites for Oxygen Reduction

Jiazhan Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

An Isolated Zinc-Cobalt Atomic Pair for Highly Active and Durable Oxygen Reduction

Ziyang Lu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

N-Doping and Defective Nanographitic Domain Coupled Hard Carbon Nanoshells for High Performance Lithium/Sodium Storage

Shifei Huang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Rice husk-derived hard carbons as high-performance anode materials for sodium-ion batteries

Qiaoqiao Wang et al.

CARBON (2018)

添加到收藏夹

Article Chemistry, Physical

Defective Hard Carbon Anode for Na-Ion Batteries

Zhifei Li et al.

CHEMISTRY OF MATERIALS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Hard Carbons for Sodium-Ion Battery Anodes: Synthetic Strategies, Material Properties, and Storage Mechanisms

Malik Wahid et al.

CHEMSUSCHEM (2018)

添加到收藏夹

Article Chemistry, Applied

Pitch-derived N-doped porous carbon nanosheets with expanded interlayer distance as high-performance sodium-ion battery anodes

Mingyuan Hao et al.

FUEL PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Chemistry, Physical

Elucidation of the Sodium-Storage Mechanism in Hard Carbons

Panxing Bai et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Target construction of ultrathin graphitic carbon encapsulated FeS hierarchical microspheres featuring superior low-temperature lithium/sodium storage properties

Hong-Hong Fan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Exploring Sodium-Ion Storage Mechanism in Hard Carbons with Different Microstructure Prepared by Ball-Milling Method

Haiyan Lu et al.

SMALL (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Designing solid-liquid interphases for sodium batteries

Snehashis Choudhury et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Chemistry, Physical

Low temperature carbonization of cellulose nanocrystals for high performance carbon anode of sodium-ion batteries

Hongli Zhu et al.

NANO ENERGY (2017)

添加到收藏夹

Article Chemistry, Physical

Three dimensional few-layer porous carbon nanosheets towards oxygen reduction

Jian Zhang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Coupled Carbonization Strategy toward Advanced Hard Carbon for High-Energy Sodium-Ion Battery

Huimin Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Electrochemistry

Apple-Biowaste-Derived Hard Carbon as a Powerful Anode Material for Na-Ion Batteries

Liming Wu et al.

CHEMELECTROCHEM (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

An advanced high-energy sodium ion full battery based on nanostructured Na2Ti3O7/VOPO4 layered materials

Hongsen Li et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Carbon nanotube decorated NaTi2(PO4)(3)/C nanocomposite for a high-rate and low-temperature sodium-ion battery anode

Lei Wang et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Expanded graphite as superior anode for sodium-ion batteries

Yang Wen et al.

NATURE COMMUNICATIONS (2014)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.