☆ 4.7 Article

Dynamic material parameter inversion of high arch dam under discharge excitation based on the modal parameters and Bayesian optimised deep learning

ADVANCED ENGINEERING INFORMATICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

A novel methodology for modal parameter identification of arch dam based on multi-level information fusion

Gang Wang et al.

Summary: Operational modal analysis is crucial in the monitoring and diagnosis of arch dam's structural health and safety. However, extracting accurate information from the vibration responses of arch dam is challenging due to background noise and small amplitudes. Traditional identification methods may lead to deviation that affects the accuracy of structural modal parameter estimation. Therefore, this paper proposes a novel methodology based on multi-level information fusion for modal parameter identification of arch dam. The proposed method identifies the structural natural frequency and damping ratio through multi-sensor data-level fusion and improves identification accuracy by identifying structural mode shapes based on dynamic feature-level fusion. The effectiveness and feasibility of the method are verified through modal results from digital and simulated signals in a 7-DOF system. An engineering case study demonstrates that the proposed method can decompose and identify closely spaced and high-frequency modes with higher accuracy, providing a new approach for modal parameter identification of arch dam.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

添加到收藏夹

Article Computer Science, Artificial Intelligence

A surrogate-assisted stochastic optimization inversion algorithm: Parameter identification of dams

YiFei Li et al.

Summary: This study presents a novel technique called surrogate-assisted stochastic optimization inversion (SASOI) algorithm for static and dynamic parameter identification in the structural health monitoring of dams. By combining the advantages of surrogate models and Bayesian inference theory, this algorithm improves the accuracy and efficiency of parameter identification methods, especially in large dams. The SASOI algorithm is applicable to other large-scale infrastructures as well.

ADVANCED ENGINEERING INFORMATICS (2023)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Multi-block synchronous prediction of concrete dam displacements using MIMO machine learning paradigm

Qiubing Ren et al.

Summary: This study proposes a multi-input multi-output machine learning approach based on support vector machine for synchronous modeling and prediction of multi-point displacements. The proposed model, called multi-target SVM, captures the complex mapping from influential factors to multi-block displacements while considering the correlation between them. An efficient optimization strategy, the parallel multi-population Jaya algorithm, is used to adaptively tune the hyperparameters of the model. The results show that the proposed multi-target SVM is more promising than other models in terms of performance and provides an innovative modeling tool for dam multi-block behavior monitoring.

ADVANCED ENGINEERING INFORMATICS (2023)

添加到收藏夹

Article Engineering, Civil

An efficient Bayesian inversion method for seepage parameters using a data-driven error model and an ensemble of surrogates considering the interactions between prediction performance indicators

Hongling Yu et al.

Summary: This study proposed an efficient Bayesian inversion method for seepage parameters that addresses model structure error and considers interactions between prediction performance indicators. By integrating a data-driven error model based on Gaussian process regression and using an ensemble of surrogates with improved Dempster-Shafer evidence theory, the proposed method significantly improves the accuracy and efficiency of Bayesian inversion for seepage parameters.

JOURNAL OF HYDROLOGY (2022)

添加到收藏夹

Article Acoustics

Improved variational mode decomposition method for vibration signal processing of flood discharge structure

Huokun Li et al.

Summary: This study proposed an improved variational mode decomposition method for processing vibration signals of flood discharge structures, which effectively filtered noise and improved the signal-to-noise ratio of vibration response, providing a foundation for vibration safety evaluation and health monitoring.

JOURNAL OF VIBRATION AND CONTROL (2022)

添加到收藏夹

Article Engineering, Civil

Multi-parameter inverse analysis of concrete dams using kernel extreme learning machines-based response surface model

Fei Kang et al.

Summary: This paper proposes a response surface model based on kernel extreme learning machine for parameter inverse analysis of concrete dams. The effectiveness of this method is verified through experiments, showing high accuracy at a low computation cost.

ENGINEERING STRUCTURES (2022)

添加到收藏夹

Article Computer Science, Information Systems

Multi-source information fusion to identify water supply pipe leakage based on SVM and VMD

Zhoufeng Wang et al.

Summary: This study proposed a method for leakage detection based on VMD and SVM with multi-source information fusion. By selecting and fusing eigenvectors, the method effectively recognized water pipe leaks and other operating conditions with a significantly improved accuracy rate compared to traditional methods.

INFORMATION PROCESSING & MANAGEMENT (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Research on Fault Feature Extraction Method Based on Parameter Optimized Variational Mode Decomposition and Robust Independent Component Analysis

Jingzong Yang et al.

Summary: This study proposes a fault feature extraction method based on VMD optimized with information entropy and RobustICA, which can be used for fault diagnosis of bearing vibration signals. Firstly, the parameters of VMD are optimized using the principle of minimum information entropy to improve the signal decomposition effect. Then, the kurtosis and cross-correlation coefficient are comprehensively used to evaluate the advantages and disadvantages of each IMF, and the optimal IMFs are selected for signal-to-noise separation. Finally, envelope demodulation analysis is performed on the denoised signal to extract the fault characteristic frequency. Experimental results show that this method can accurately extract the weak characteristics of rolling bearing fault signals and achieve accurate fault identification.

COATINGS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Research on the Prediction Method of Monthly Hidden Danger Quantity in Coal Mine Based on BP Neural Network Periodic Combination Model

Jing Li et al.

Summary: This study analyzes the historical monthly hidden danger quantity pattern in coal mines and constructs three prediction models. The results show that the Adam-BP model improves prediction accuracy, and the Month-Adam-BP model further enhances it.

MATHEMATICAL PROBLEMS IN ENGINEERING (2022)

添加到收藏夹

Article Construction & Building Technology

Multi-sensor real-time monitoring of dam behavior using self-adaptive online sequential learning

Qiubing Ren et al.

Summary: This paper presents an online model based on sequential learning for real-time monitoring of dam displacement behavior. The proposed model effectively captures the complex nonlinear mapping from environmental variables to displacements through sequential learning and data fusion techniques. The verification using real monitoring data shows that the proposed model can achieve satisfactory prediction accuracy with low computational cost.

AUTOMATION IN CONSTRUCTION (2022)

添加到收藏夹

Article Transportation Science & Technology

A multi-output deep learning model based on Bayesian optimization for sequential train delays prediction

Jie Luo et al.

Summary: This paper proposes a Bayesian optimization-based multi-output deep learning model to predict the arrival delays of multiple trains simultaneously, and the test results show that the proposed model outperforms the standard train delay prediction benchmark model.

INTERNATIONAL JOURNAL OF RAIL TRANSPORTATION (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Multipoint hybrid model for RCC arch dam displacement health monitoring considering construction interface and its seepage

Bo Liu et al.

Summary: Most roller compacted concrete (RCC) dams face the issue of poor cementation quality at the construction interface. To tackle the limitations of conventional models, a multipoint hybrid model considering the construction interface and its seepage is proposed for monitoring the displacement health of RCC arch dams. This model, called HIST-M, improves spatial interpretation and prediction capabilities by introducing spatial coordinates based on the hydrostatic-seasonal-time (HST) model. Coupled with the analysis model of seepage field and stress field using the finite element method, the HIST-M model takes into account the influence of construction interface and seepage. The proposed model shows remarkable improvement in long-term prediction abilities and prediction precision compared to commonly used models.

APPLIED MATHEMATICAL MODELLING (2022)

添加到收藏夹

Article Construction & Building Technology

Attention-LSTM architecture combined with Bayesian hyperparameter optimization for indoor temperature prediction

Ben Jiang et al.

Summary: This paper introduces a deep learning method for predicting indoor temperature and compares it with other models. By optimizing hyperparameters, the model has an advantage in short-term time prediction and accurately predicts the change trend of indoor temperature.

BUILDING AND ENVIRONMENT (2022)

添加到收藏夹

Article Construction & Building Technology

Optimal insulation backfill depth analysis of coaxial deep borehole heat exchanger based on multi-factor orthogonal experiments

Yongying Jia et al.

Summary: This paper investigates the combined influence of multiple factors on the optimal insulation backfill depth of coaxial deep borehole heat exchanger (DBHE) coupled with ground source heat pump (GSHP) system. An orthogonal experiment and numerical heat transfer model are employed, and sensitivity analysis and linear regression analysis are conducted. The results indicate that factors such as inlet temperature, inner pipe thermal conductivity, and pipe depth have a positive correlation with the optimal insulation backfill depth, while inlet flow rate and geothermal gradient have a negative correlation. The findings can provide guidance for the application of the GSHP coupled with DBHE system in colder regions.

ENERGY AND BUILDINGS (2022)

添加到收藏夹

Article Engineering, Civil

Long-term viscoelastic deformation monitoring of a concrete dam: A multi-output surrogate model approach for parameter identification

Chaoning Lin et al.

Summary: This study proposes a method to identify the mechanical properties of a concrete dam through long-term monitoring data. By training a surrogate model and using optimization, accurate predictions of dam displacement can be made while improving computational efficiency.

ENGINEERING STRUCTURES (2022)

添加到收藏夹

Article Engineering, Mechanical

Vibration load identification in the time-domain of high arch dam under discharge excitation based on hybrid LSQR algorithm

Huokun Li et al.

Summary: The identification of vibration load induced by discharge of high arch dam is crucial. A hybrid LSQR algorithm has been proposed to address the ill-posedness in time-domain identification, leading to improved stability and better recognition accuracy compared to conventional methods.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Review Engineering, Civil

Recent advancement of concrete dam health monitoring technology: A literature review

Guru Prakash et al.

Summary: This paper reviews the models for dam health monitoring developed in recent years, classifying them into numerical, data-driven, and hybrid models. Data-driven models have gained significant attention due to advancements in artificial intelligence and statistical tools. The paper provides a summary of existing knowledge and an opportunity for dam owners and practitioners to select the best model for their dams.

STRUCTURES (2022)

添加到收藏夹

Article

Fast inversion method of structural parameters based on PCE surrogate model and Bayesian optimization

YiFei LI et al.

Zhongguo Kexue Jishu Kexue/Scientia Sinica Technologica (2021)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Prediction of COVID-19 confirmed cases combining deep learning methods and Bayesian optimization

Hossein Abbasimehr et al.

Summary: The study proposes three hybrid approaches for forecasting COVID-19 time series methods based on deep learning models, enhanced by the Bayesian optimization algorithm, with results demonstrating the superiority of deep learning models for both short-term and long-horizon forecasting over benchmark models.

CHAOS SOLITONS & FRACTALS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

An improved Hilbert-Huang transform method for modal parameter identification of a high arch dam

Bowen Wei et al.

Summary: A method combining empirical mode decomposition and masking signal processing is proposed to address difficulties in extracting vibration signals of a high arch dam flow discharge structure under water flow excitation. By mixing different frequency parts of the signal and effectively inhibiting modal confusion, the method accurately identifies the modal parameters of the structure.

APPLIED MATHEMATICAL MODELLING (2021)

添加到收藏夹

Article Engineering, Civil

Spatiotemporal hybrid model for concrete arch dam deformation monitoring considering chaotic effect of residual series

Bowen Wei et al.

Summary: A spatiotemporal hybrid model for concrete arch dam deformation monitoring has been proposed, which introduces space coordinate and utilizes PSO-SVM algorithm to analyze and predict residual series, achieving comprehensive reflection of multi-point deformation monitoring.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Dynamic parameter inverse analysis of concrete dams based on Jaya algorithm with Gaussian processes surrogate model

Fei Kang et al.

Summary: This study presents a dynamic parameter inverse analysis process for concrete dams based on Gaussian process regression and Jaya algorithm, and verifies the performance of this method through numerical examples. The results show that Gaussian process regression can significantly improve parameter identification efficiency, and the Jaya algorithm shows promise in parameter recognition.

ADVANCED ENGINEERING INFORMATICS (2021)

添加到收藏夹

Article Physics, Multidisciplinary

Coal and Rock Hardness Identification Based on EEMD and Multi-Scale Permutation Entropy

Tao Liu et al.

Summary: This study proposes an efficient hardness identification approach to improve the accuracy and real-time performance of coal and rock hardness detection. By processing the signal through multiple steps and constructing a neural network model, the method successfully filters out noise interference, enhances prediction accuracy, and ensures efficient roadheader cutting.

ENTROPY (2021)

添加到收藏夹

Article Engineering, Geological

Parametric analysis of SSI algorithm in modal identification of high arch dams

Shuai Li et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

Coupling prediction model for long-term displacements of arch dams based on long short-term memory network

Wenju Liu et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2020)

添加到收藏夹

Article Engineering, Civil

Seismic and structural health monitoring of Cabril dam. Software development for informed management

Sergio Oliveira et al.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2020)

添加到收藏夹

Article Construction & Building Technology

IDE-MLSSVR-Based Back Analysis Method for Multiple Mechanical Parameters of Concrete Dams

Tengfei Bao et al.

JOURNAL OF STRUCTURAL ENGINEERING (2020)

添加到收藏夹

Article Engineering, Civil

Automatic modal parameter identification of high arch dams: feasibility verification

Shuai Li et al.

EARTHQUAKE ENGINEERING AND ENGINEERING VIBRATION (2020)

添加到收藏夹

Article Acoustics

Beat vibration mechanism of a sluice pier under high-speed flood discharge excitation

Huo-Kun Li et al.

JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Dynamic inversion method for the material parameters of a high arch dam and its foundation

Huokun Li et al.

APPLIED MATHEMATICAL MODELLING (2019)

添加到收藏夹

Article Acoustics

Modal identification of arch dams using balanced stochastic subspace identification

Reza Tarinejad et al.

JOURNAL OF VIBRATION AND CONTROL (2018)

添加到收藏夹

Article Construction & Building Technology

Forced-Vibration Tests and Numerical Modeling of the Daniel-Johnson Multiple-Arch Dam

Olivier Gauron et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2018)

添加到收藏夹

Article Acoustics

Inversion algorithm for the whole prototype dynamic displacement field of a high arch dam based on limited measuring points

Huokun Li et al.

JOURNAL OF VIBRATION AND CONTROL (2017)

添加到收藏夹

Proceedings Paper Engineering, Civil

Calibration of finite element models of concrete arch-gravity dams using dynamical measures: the case of Ridracoli

Giulia Buffi et al.

X INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS (EURODYN 2017) (2017)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Method for Choosing the Optimal Resource in Back-Analysis for Multiple Material Parameters of a Dam and Its Foundation

Huaizhi Su et al.

JOURNAL OF COMPUTING IN CIVIL ENGINEERING (2016)

添加到收藏夹

Article Construction & Building Technology

Application of stochastic subspace identification for stay cables with an alternative stabilization diagram and hierarchical sifting process

Wen-Hwa Wu et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2016)

添加到收藏夹

Article Acoustics

Modal identification of structures by a novel approach based on FDD-wavelet method

Reza Tarinejad et al.

JOURNAL OF SOUND AND VIBRATION (2014)

添加到收藏夹

Article Engineering, Geological

Full-scale experimental modal analysis of an arch dam: The first experience in Iran

Reza Tarinejad et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2014)

添加到收藏夹

Review Engineering, Civil

Health monitoring of concrete dams: a literature review

P. Bukenya et al.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2014)

添加到收藏夹

Article Instruments & Instrumentation

Optimal sensor placement for large structures using the nearest neighbour index and a hybrid swarm intelligence algorithm

Jijian Lian et al.

SMART MATERIALS AND STRUCTURES (2013)

添加到收藏夹

Article Construction & Building Technology

Earthquake Behavior of Berke Arch Dam Using Ambient Vibration Test Results

Baris Sevim et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2012)

添加到收藏夹

Article Mathematics, Applied

Finite element model updating effects on nonlinear seismic response of arch dam-reservoir-foundation systems

Alemdar Bayraktar et al.

FINITE ELEMENTS IN ANALYSIS AND DESIGN (2011)

添加到收藏夹

Article Acoustics

Finite element model calibration of berke arch dam using operational modal testing

Baris Sevim et al.

JOURNAL OF VIBRATION AND CONTROL (2011)

添加到收藏夹

Article Engineering, Multidisciplinary

Back analysis of mechanical parameters of roller compacted concrete dam

Gu ChongShi et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2010)

添加到收藏夹

Article Engineering, Multidisciplinary

ERA modal identification method for hydraulic structures based on order determination and noise reduction of singular entropy

Lian JiJian et al.

SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Health assessment of concrete dams by overall inverse analyses and neural networks

R Fedele et al.

INTERNATIONAL JOURNAL OF FRACTURE (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.