☆ 4.5 Article

Experimental investigation of a non-smooth quasi-zero-stiffness isolator

ACTA MECHANICA SINICA (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Vibration energy flow transmission in systems with Coulomb friction

Wei Dai et al.

Summary: The study reveals that dry friction in dynamic systems can suppress vibration response and dissipate vibrational energy at both low and high frequencies. Frictional contact at interfaces can increase force transmissibility and energy transfer, especially at high excitation frequencies.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Mechanical

An origami inspired quasi-zero stiffness vibration isolator using a novel truss-spring based stack Miura-ori structure

Kan Ye et al.

Summary: In this study, an origami-inspired vibration isolator with quasi-zero-stiffness (QZS) property is proposed using a truss-spring based stack Miura-ori (TS-SMO) structure. The unique structure uses coil spring sets to replace deformable creases, improving physical realization in engineering applications. Nonlinear force response and QZS feature are achieved through geometric nonlinearity and specific Poisson's ratio profile, with isolation performance discussed under variable viscous damping effects.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Bio-inspired toe-like structure for low-frequency vibration isolation

Ge Yan et al.

Summary: A novel bio-inspired toe-like structure is developed for low-frequency vibration isolation, possessing favorable high static and low dynamic stiffness characteristics. It effectively isolates low frequency vibration loads and provides a feasible approach to passive vibration control in the low frequency band.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Engineering, Mechanical

On the detailed design of a quasi-zero stiffness device to assist in the realisation of a translational Lanchester damper

G. Gatti et al.

Summary: A translational Lanchester damper adds damping to a structure using a combination of viscous damper and mass, but achieving low stiffness for the device is crucial to behave like a Lanchester damper rather than a dynamic vibration absorber. By utilizing a specific geometry with linear springs and rigid links, the device is able to maintain linear-like behavior despite its inherent nonlinearity. The study on how geometry affects the nonlinear behavior provides general guidelines for design, and a prototype incorporating the low stiffness element has been successfully tested on vibrating structures.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Article Acoustics

Effect of damping nonlinearity on the dynamics and performance of a quasi-zero-stiffness vibration isolator

Mehran Shahraeeni et al.

Summary: This study investigates the effects of nonlinear damping on the dynamics and performance of quasi-zero-stiffness vibration isolators. The results demonstrate that increasing nonlinear damping can effectively reduce peak transmissibility, but may increase transmissibility at intermediate to high frequencies as the base excitation level increases.

JOURNAL OF SOUND AND VIBRATION (2022)

添加到收藏夹

Article Engineering, Mechanical

Design of a metastructure for vibration isolation with quasi-zero-stiffness characteristics using bistable curved beam

Srajan Dalela et al.

Summary: This paper introduces a metastructure-based vibration isolation model with high static and low dynamic stiffness properties to enhance isolation effectiveness of small-scale equipment under low-frequency excitations. The quasi-zero-stiffness (QZS) effect is achieved through the snap-through behavior of cosine beam systems and bending-dominated behavior of semicircular arches within each unit cell. Analytical and numerical studies as well as experimental validation confirm the static and dynamic characteristics of the proposed metastructure, showing lower transmissibility and wider isolation range compared to a linear model. The parametric study reveals that motion transmissibility decreases with decreasing damping ratio in the low-frequency region, while increasing damping ratio leads to wider effective isolation range. Stability analysis shows the unstable region in the frequency response curve reduces with higher damping ratio and is independent of excitation amplitude.

NONLINEAR DYNAMICS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Analytical Study on the Low-Frequency Vibrations Isolation System for Vehicle's Seats Using Quasi-Zero-Stiffness Isolator

Mohammad Abuabiah et al.

Summary: A vibration isolation system for vehicle seats has been designed in this study, which utilizes oblique springs, a vertical spring, and a sleeve air spring to achieve quasi-zero stiffness and support additional load. The system improves the vibration isolation performance of the seats for small vehicles.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Article Engineering, Mechanical

A non-smooth quasi-zero-stiffness isolator with displacement constraints

Rong Zeng et al.

Summary: This paper designs a double-layer quasi-zero-stiffness (QZS) vibration isolator with displacement constraints to reduce large-amplitude vibration. The mechanical model of the isolator is established based on Hertz's contact model (DLQZS-HCM) and the vibration isolation performance is examined theoretically using the incremental harmonic balance method. The results show that the DLQZS-HCM isolator performs better than double-layer linear isolator (DLL) and double-layer QZS isolator (DLQZS) in extending the frequency range of vibration isolation and decreasing peak transmissibility under large-amplitude excitation. Feedback control is also applied to further enhance the isolation performance at low-frequency levels.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Mechanical

A novel multi-layer isolation structure for transverse stabilization inspired by neck structure

Xiuting Sun et al.

Summary: A novel multi-layer structure with nonlinear elastic components is proposed in this paper to stabilize the head from body movements and external vibration. The structure is capable of loading weight and isolating bending vibration, providing solutions for car sickness and having potential applications in mechanical arm and satellite sensors.

ACTA MECHANICA SINICA (2022)

添加到收藏夹

Article Engineering, Mechanical

A quasi-zero-stiffness vibration isolator using a cam mechanism with user-defined profile

Ming Li et al.

Summary: This paper introduces a passive quasi-zero-stiffness vibration isolator using a cam mechanism, which can generate ideal simplest restoring force directly and eliminate approximation errors. Experimental results confirm the proposed design principle and show the advantages of the QZS isolator in vibration tests, with wider isolation frequency bandwidth and weaker resonance effect compared to linear counterparts. The specific isolation efficiency and the effect of excitation amplitudes on vibration attenuation performance are comprehensively compared.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Acoustics

Post-grazing dynamics of a vibro-impacting energy generator

Larissa Serdukova et al.

Summary: The motion of a forced vibro-impacting incline energy harvester is investigated in parameter regimes with asymmetry in the number of impacts on the bottom and top. Semi-analytical expressions for asymmetric periodic motion with a ratio of 2:1 for impacts on the device bottom and top are obtained, derived through nonlinear maps and impact conditions. Bifurcation diagrams and linear stability analysis validate the numerical solutions for asymmetric motions with different incline angles.

JOURNAL OF SOUND AND VIBRATION (2021)

添加到收藏夹

Review Engineering, Mechanical

Vibration control based metamaterials and origami structures: A state-of-the-art review

J. C. Ji et al.

Summary: Vibration and sound control are crucial for practical engineering systems, and metamaterials and origami-based structures offer promising applications due to their unique physical properties. Metamaterials exhibit extremal properties not found in conventional materials, with recent advances in auxetic, band gap, and pentamode metamaterials for vibration and sound mitigations. Origami, as an ancient Japanese art, has become a new design paradigm with its multi-stable states and desirable stiffness characteristics for vibration control.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

添加到收藏夹

Article Engineering, Mechanical

An innovative quasi-zero stiffness isolator with three pairs of oblique springs

Feng Zhao et al.

Summary: This paper introduces an innovative design of quasi-zero stiffness isolator with three pairs of oblique springs, optimizing for lower transmissibility and wider QZS region. The design is validated through static and dynamic analyses, showing improved performance compared to traditional isolators.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

Vibration transmission and energy flow of impact oscillators with nonlinear motion constraints created by diamond-shaped linkage mechanism

Wei Dai et al.

Summary: This study investigates the dynamic behavior and vibration transmission of impact oscillators with nonlinear motion constraints. It was found that the use of nonlinear constraint can lead to higher response amplitudes but lower force transmissibility compared to linear constraints.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Acoustics

A quasi-zero-stiffness dynamic vibration absorber

Yaopeng Chang et al.

Summary: This paper proposes a quasi-zero-stiffness (QZS) DVA for ultra-low frequency vibration absorption, which is designed using a simple oblique-spring model and verified for its dynamic behavior through the harmonic balance method (HBM) and numerical analyses. Experimental results demonstrate the excellent performance of QZS DVA in absorbing ultra-low frequency vibrations.

JOURNAL OF SOUND AND VIBRATION (2021)

添加到收藏夹

Article Engineering, Mechanical

A novel integrated quasi-zero stiffness vibration isolator for coupled translational and rotational vibrations

Kan Ye et al.

Summary: The integrated translational-rotational QZS vibration isolator designed in this paper using the cam-roller mechanism can provide high-static-low-dynamic stiffness in two directions simultaneously, with independent excitations in translational and rotational directions but mutual interaction. The proposed QZS system shows better isolation performance in both translational and rotational directions compared to the linear system without the cam-roller mechanism.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

添加到收藏夹

Article Mathematics, Applied

Enhanced vibration isolation performance of quasi-zero-stiffness isolator by introducing tunable nonlinear inerter

Chaoran Liu et al.

Summary: This paper focuses on enhancing the QZS isolator by introducing tunable nonlinear inerter (TNI) to improve low-frequency isolation performance. Analytical calculations, stability analysis, and numerical simulations were conducted to compare the isolation performances of the QZS isolator and the QZS-TNI isolator. Results show that adding the inerter considerably suppresses the bending trend of the transmissibility curve, leading to a wider frequency range of isolation and a lower peak transmissibility.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tailored Mechanical Metamaterials with Programmable Quasi-Zero-Stiffness Features for Full-Band Vibration Isolation

Quan Zhang et al.

Summary: A new design strategy for a programmable quasi-zero-stiffness (QZS) mechanical metamaterial is proposed in this research, which can achieve tailored stair-stepping force-displacement curves with multiple QZS working ranges and ultra-low frequency vibration isolation capability. The mechanism solely depends on the structural geometry of curved beams and is materials-independent, opening up a new avenue for innovating compact and scalable QZS isolators.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Acoustics

Six degree of freedom quasi-zero stiffness magnetic spring with active control: Theoretical analysis of passive versus active stability for vibration isolation

Nur Afifah Kamaruzaman et al.

Summary: This paper compares passive and active stability analyses of a six degree of freedom quasi-zero stiffness magnetic levitation vibration isolation system. The study shows that increasing passive stability has a minimal impact on isolation performance, but control benefits from improved passive stability. The designed control system demonstrates robustness to uncertainties with a large stability margin dominating the closed-loop response.

JOURNAL OF SOUND AND VIBRATION (2021)

添加到收藏夹

Article Engineering, Mechanical

Nonlinear energy sink with limited vibration amplitude

Xiao-Feng Geng et al.

Summary: Research on a limited nonlinear energy sink using a piecewise spring device to restrict vibration amplitude shows that the vibration of the nonlinear energy sink can be effectively suppressed, although the vibration damping effect on the linear oscillator is weakened after the introduction of the piecewise spring.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

添加到收藏夹

Article Engineering, Mechanical

Investigation on clearance-induced vibro-impacts of torsional system based on Hertz contact nonlinearity

Yuanfeng Xia et al.

Summary: This study focuses on the vibration impacts caused by clearance in torsional systems, analyzing and numerically simulating the phenomenon using a new piecewise nonlinear clearance element and Hertz contact theory. The results show that the clearance element with piecewise nonlinear stiffness can accurately capture the transient vibration impact forces and time-varying frequency responses in the system.

MECHANISM AND MACHINE THEORY (2021)

添加到收藏夹

Article Engineering, Mechanical

A nonlinear vibration isolator with quasi-zero-stiffness inspired by Miura-origami tube

Hesheng Han et al.

Summary: A nonlinear vibration isolator with quasi-zero-stiffness (QZS) is designed based on the bi-stable Miura-origami tube, featuring a negative stiffness element with four rods and a horizontal spring. The static characteristics and design procedure for the QZS isolation system with a lumped mass are studied, showcasing its high-static-low-dynamic stiffness property.

NONLINEAR DYNAMICS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Design and experimental study of a compact quasi-zero-stiffness isolator using wave springs

Wang Qiang et al.

Summary: This paper presents a compact WQZS isolator designed by connecting a pair of repulsive magnet rings and a space-saving wave spring in parallel. Experimental results show that the WQZS isolator outperforms linear counterparts in reducing vibration frequency and peak transmissibility, making it suitable for low-frequency vibration isolation in space-limited environments.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Mechanical

Versatile mass excited impact oscillator

Marian Wiercigroch et al.

NONLINEAR DYNAMICS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

A two degree of freedom stable quasi-zero stiffness prototype and its applications in aseismic engineering

GuangNan Zhu et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2020)

添加到收藏夹

Article Mathematics, Applied

Statics and dynamics of a nonlinear oscillator with quasi-zero stiffness behaviour for large deflections

Gianluca Gatti

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2020)

添加到收藏夹

Article Acoustics

Design of a quasi-zero stiffness isolation system for supporting different loads

Kan Ye et al.

JOURNAL OF SOUND AND VIBRATION (2020)

添加到收藏夹

Article Engineering, Mechanical

Design and experimental investigation of ultra-low frequency vibration isolation during neonatal transport

Qiang Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

添加到收藏夹

Article Engineering, Mechanical

Chaos in impact oscillators not in vain: Dynamics of new mass excited oscillator

Dimitri Costa et al.

NONLINEAR DYNAMICS (2020)

添加到收藏夹

Article Engineering, Mechanical

Accurate modeling and analysis of a typical nonlinear vibration isolator with quasi-zero stiffness

Chaoran Liu et al.

NONLINEAR DYNAMICS (2020)

添加到收藏夹

Article Acoustics

Large stroke quasi-zero stiffness vibration isolator using three-link mechanism

Ge Yan et al.

JOURNAL OF SOUND AND VIBRATION (2020)

添加到收藏夹

Article Engineering, Mechanical

A general methodology to establish the contact force model for complex contacting surfaces

Jia Ma et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

添加到收藏夹

Article Acoustics

A tunable quasi-zero stiffness isolator based on a linear electromagnetic spring

Shujin Yuan et al.

JOURNAL OF SOUND AND VIBRATION (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hertz-type frictional contact problem of a bidirectionally graded half-plane indented by a sliding rounded punch

Onur Arslan

MECHANICS OF MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

A bio-inspired isolator based on characteristics of quasi-zero stiffness and bird multi-layer neck

Tianchang Deng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

添加到收藏夹

Article Mechanics

The Hertz contact problem in couple-stress elasticity

P. A. Gourgiotis et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)

添加到收藏夹

Article Instruments & Instrumentation

Fluidic origami cellular structure with asymmetric quasi-zero stiffness for low-frequency vibration isolation

Sahand Sadeghi et al.

SMART MATERIALS AND STRUCTURES (2019)

添加到收藏夹

Article Engineering, Mechanical

Nonlinear vibration isolation for fluid-conveying pipes using quasi-zero stiffness characteristics

Hu Ding et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

Parameter design for a vibration absorber with time-delayed feedback control

Feng Wang et al.

ACTA MECHANICA SINICA (2019)

添加到收藏夹

Article Engineering, Mechanical

Extended Hertz Theory of Contact Mechanics for Case-Hardened Steels With Implications for Bearing Fatigue Life

Nikhil D. Londhe et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Acoustics

A 3-axis torsion quasi-zero-stiffness-based sensor system for angular vibration measurement

Jiying Tuo et al.

JOURNAL OF VIBRATION AND CONTROL (2018)

添加到收藏夹

Review Engineering, Mechanical

Vibration and noise control using shunted piezoelectric transducers: A review

J. A. B. Gripp et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

添加到收藏夹

Article Engineering, Mechanical

Analytical study of a quasi-zero stiffness coupling using a torsion magnetic spring with negative stiffness

Yisheng Zheng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

添加到收藏夹

Article Engineering, Mechanical

Primary resonance analysis and vibration suppression for the harmonically excited nonlinear suspension system using a pair of symmetric viscoelastic buffers

Xiaojuan Sun et al.

NONLINEAR DYNAMICS (2018)

添加到收藏夹

Article Engineering, Mechanical

Simulated and experimental studies on a high-static-low-dynamic stiffness isolator using magnetic negative stiffness spring

Guangxu Dong et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

添加到收藏夹

Article Engineering, Mechanical

Nonlinear integral resonant controller for vibration reduction in nonlinear systems

Ehsan Omidi et al.

ACTA MECHANICA SINICA (2016)

添加到收藏夹

Article Engineering, Mechanical

Two-sided damping constraint control strategy for high-performance vibration isolation and end-stop impact protection

Zhifeng Hao et al.

NONLINEAR DYNAMICS (2016)

添加到收藏夹

Article Engineering, Mechanical

Experimental investigation of a vibration isolation system using negative stiffness structure

Thanh Danh Le et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)

添加到收藏夹

Article Acoustics

A nonlinear spring mechanism incorporating a bistable composite plate for vibration isolation

A. D. Shaw et al.

JOURNAL OF SOUND AND VIBRATION (2013)

添加到收藏夹

Article Engineering, Mechanical

Force and displacement transmissibility of a nonlinear isolator with high-static-low-dynamic-stiffness

A. Carrella et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2012)

添加到收藏夹

Article Mathematics, Applied

The effect of discretization on the numerical simulation of the vibrations of the impacting cantilever beam

Barbara Blazejczyk-Okolewska et al.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2010)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Experimental chaos in nonlinear vibration isolation system

Jing-Jun Lou et al.

CHAOS SOLITONS & FRACTALS (2009)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Dynamics of a two-degree-of-freedom cantilever beam with impacts

Barbara Blazejczyk-Okolewska et al.

CHAOS SOLITONS & FRACTALS (2009)

添加到收藏夹

Article Acoustics

On the force transmissibility of a vibration isolator with quasi-zero-stiffness

A. Carrella et al.

JOURNAL OF SOUND AND VIBRATION (2009)

添加到收藏夹

Review Acoustics

Recent advances in nonlinear passive vibration isolators

R. A. Ibrahim

JOURNAL OF SOUND AND VIBRATION (2008)

添加到收藏夹

Article Mechanics

Impact oscillator with Hertz's model of contact

L Pust et al.

MECCANICA (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.