4.7 Article

Origin of hard magnetism in Fe-Co-Ni-Al-Ti-Cu high-entropy alloy: Chemical shape anisotropy

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Multidisciplinary Sciences

A highly distorted ultraelastic chemically complex Elinvar alloy

Q. F. He et al.

Summary: The development of high-performance ultraelastic metals is crucial for various industrial applications, and chemically complex alloys with large atomic size misfits have shown promising properties, including a high elastic strain limit and a constant elastic modulus at room temperature.

NATURE (2022)

Article Materials Science, Multidisciplinary

Effects of Cr/Ni ratio on physical properties of Cr-Mn-Fe-Co-Ni high-entropy alloys

Christian Wagner et al.

Summary: The physical properties of ten single-phase FCC CrxMn20Fe20Co20Ni40-x high-entropy alloys were investigated. The lattice parameters of the alloys were nearly independent of composition, while the solidus temperatures increased linearly with increasing Cr content. The alloys did not exhibit ferromagnetism in a certain temperature range, and the temperature dependencies of their coefficients of thermal expansion and elastic moduli were independent of composition. Ab initio simulations qualitatively reproduced the magnetic transitions and magnetostriction observed in the alloys. The plastic deformation of the alloys was found to occur initially by the glide of perfect dislocations on {111} planes. The stacking fault energy (SFE) was determined and found to decrease with increasing Cr content. However, the calculated intrinsic SFEs were lower than the experimental values. The ab initio simulations showed that atomic relaxations, finite temperatures, and magnetism strongly influenced the intrinsic SFE.

ACTA MATERIALIA (2022)

Article Multidisciplinary Sciences

Highly complex magnetic behavior resulting from hierarchical phase separation in AlCo(Cr)FeNi high-entropy alloys

Qianqian Lan et al.

Summary: Magnetic high-entropy alloys (HEAs) are high-performance magnetic materials with concentrated compositions and complex multi-phase structures. This study reveals the influence of a hierarchically decomposed B2 + A2 structure in an AlCo0.5Cr0.5FeNi HEA on the formation of magnetic vortex states within individual A2 precipitates. Non-magnetic or weakly ferromagnetic B2 precipitates and strongly magnetic Fe-Co-rich interphase A2 regions are also observed. These findings provide important insights into the origin of coercivity in this HEA.

ISCIENCE (2022)

Article Materials Science, Multidisciplinary

Formation mechanism of partial stacking faults by incomplete mixed-mode phase transformation: A case study of Fe-Ga alloys

Tianzi Yang et al.

Summary: This study provides insights into the characteristics of partial stacking faults (PSFs) and the interaction between lattice distortion and atomic diffusion in the formation of PSFs, through a case study on aged Fe-Ga alloy.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Multidisciplinary Sciences

A mechanically strong and ductile soft magnet with extremely low coercivity

Liuliu Han et al.

Summary: Soft magnetic materials are essential for electrical applications and sustainable energy supply, as they can respond to changes in applied magnetic field with low energy loss. However, designing soft magnetic alloys with both high strength and low coercivity is a fundamental challenge. In this study, a Fe-Co-Ni-Ta-Al multicomponent alloy was developed, which contained ferromagnetic matrix and paramagnetic coherent nanoparticles. These nanoparticles impede dislocation motion, enhancing the strength and ductility of the alloy, while maintaining its soft magnetic properties.

NATURE (2022)

Article Multidisciplinary Sciences

Phase-selective recrystallization makes eutectic high-entropy alloys ultra-ductile

Qingfeng Wu et al.

Summary: This study proposes the concept of phase-selective recrystallization to improve the ductility and strength of eutectic alloys. By manipulating the strain partitioning behavior of the duplex phases, the resulting microstructure fully releases the strain hardening capacity and achieves high ductility. This concept is applicable to various duplex alloys and opens new frontiers for traditional eutectic alloys as high-strength metallic materials.

NATURE COMMUNICATIONS (2022)

Article Multidisciplinary Sciences

Achieving thermally stable nanoparticles in chemically complex alloys via controllable sluggish lattice diffusion

Bo Xiao et al.

Summary: Nanoparticle strengthening is crucial for developing high-performance structural materials, but poor thermal stability and rapid coarsening of nanoparticles often lead to material failures. In this study, we demonstrate a strategy to achieve ultra-stable nanoparticles at high temperatures through controllable sluggish lattice diffusion, which is enabled by the addition of Co element. We also reveal the importance of reduced interdiffusion coefficients and increased incompressibility of Al induced by Co concentration in controlling the sluggish lattice diffusion effect.

NATURE COMMUNICATIONS (2022)

Article Nanoscience & Nanotechnology

Hard magnetic properties of FeCoNiAlCuXTiX based high entropy alloys

Suok-Min Na et al.

Summary: High entropy alloys (HEA) with multiple principal alloying elements exhibit unique properties due to high configurational entropy and lattice strain. The addition of Cu/Ti to FeCoNiAl-based HEAs enhances coercivity but reduces saturation magnetization. Fe2CoNiAlCu0.4Ti0.4 HEA shows promising hard magnetic properties as an isotropic cast magnet, slightly outperforming Alnico 2 magnets, with the ability to improve saturation magnetization by adjusting the Fe and Co ratio compared to other alloying elements.

AIP ADVANCES (2021)

Article Materials Science, Multidisciplinary

Dynamic precipitation and the resultant magnetostriction enhancement in [001]-oriented Fe-Ga alloys

Junming Gou et al.

Summary: Introducing dispersive nanoparticle precipitation has been found to enhance the functional properties of alloys, especially in those with specific orientations. Internal stress accelerates solute partitioning and precipitate behaviors, altering the interactions between matrix and precipitates, ultimately impacting alloy performance.

ACTA MATERIALIA (2021)

Article Nanoscience & Nanotechnology

A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures

Mingliang Wang et al.

Summary: EHEAs are a hot topic in research due to their excellent properties, with the development of a novel AlCr1.3TiNi2 EHEA showing low density and outstanding mechanical properties. The new EHEA demonstrates higher hardness and specific yield strength values compared to traditional alloys.

SCRIPTA MATERIALIA (2021)

Article Materials Science, Multidisciplinary

Accelerated and conventional development of magnetic high entropy alloys

Varun Chaudhary et al.

Summary: High-entropy alloys (HEA) are attracting attention due to their unique combination of properties, and magnetic HEA represent a promising alternative to conventional soft magnetic metallic materials. Research on magnetic HEA is progressing, with a focus on alloy composition, crystal structure, processing techniques, and future trends.

MATERIALS TODAY (2021)

Article Multidisciplinary Sciences

Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy

Ying Yang et al.

Summary: This study demonstrates a strategy of using nanoprecipitates to enhance the strength of the matrix while modulating its transformation characteristics, leading to simultaneous improvements in tensile strength and ductility in a single alloy.

NATURE (2021)

Article Chemistry, Multidisciplinary

Beyond Solid Solution High-Entropy Alloys: Tailoring Magnetic Properties via Spinodal Decomposition

Ziyuan Rao et al.

Summary: The high-entropy alloy concept has evolved from stabilizing solid solutions to rendering them metastable through spinodal decomposition, in order to enhance magnetic properties. By adjusting the composition to form Fe-Co enriched regions, the magnetic properties of the decomposed alloy can be improved.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Materials Science, Multidisciplinary

Heterostructures: new opportunities for functional materials

Xiangyi Zhang

MATERIALS RESEARCH LETTERS (2020)

Review Chemistry, Multidisciplinary

Phase Engineering of High-Entropy Alloys

Xuejiao Chang et al.

ADVANCED MATERIALS (2020)

Article Multidisciplinary Sciences

Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels

Ran Ding et al.

SCIENCE ADVANCES (2020)

Article Materials Science, Multidisciplinary

Defects-aggregated cell boundaries induced domain wall curvature change in Fe-rich Sm-Co-Fe-Cu-Zr permanent magnets

Wentao Jia et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Article Nanoscience & Nanotechnology

High entropy alloys: Key issues under passionate debate

Krishanu Biswas et al.

SCRIPTA MATERIALIA (2020)

Review Nanoscience & Nanotechnology

High-entropy alloys

Easo P. George et al.

NATURE REVIEWS MATERIALS (2019)

Article Multidisciplinary Sciences

Magnetically-driven phase transformation strengthening in high entropy alloys

Changning Niu et al.

NATURE COMMUNICATIONS (2018)

Article Materials Science, Multidisciplinary

Current progress and future challenges in rare-earth-free permanent magnets

Jun Cui et al.

ACTA MATERIALIA (2018)

Article Nanoscience & Nanotechnology

Deformation and annealing behaviors of as-cast non-equiatomic high entropy alloy

Jian Tu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Review Materials Science, Multidisciplinary

A critical review of high entropy alloys and related concepts

D. B. Miracle et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Microstructural and magnetic property evolution with different heat-treatment conditions in an alnico alloy

Lin Zhou et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

A Combinatorial Approach for Assessing the Magnetic Properties of High Entropy Alloys: Role of Cr in AlCoxCr1-xFeNi

Tushar Borkar et al.

ADVANCED ENGINEERING MATERIALS (2017)

Article Materials Science, Multidisciplinary

Tailoring magnetic behavior of CoFeMnNiX (X = Al, Cr, Ga, and Sn) high entropy alloys by metal doping

Tingting Zuo et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Rare-earth high-entropy alloys with giant magnetocaloric effect

Y. Yuan et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

New insights into the phase transformations to isothermal ω and ω-assisted α in near β-Ti alloys

Tong Li et al.

ACTA MATERIALIA (2016)

Article Materials Science, Multidisciplinary

Origin of shear induced β to ω transition in Ti-Nb-based alloys

M. J. Lai et al.

ACTA MATERIALIA (2015)

Article Materials Science, Multidisciplinary

A geometric model for intrinsic residual strain and phase stability in high entropy alloys

Y. F. Ye et al.

ACTA MATERIALIA (2015)

Article Materials Science, Multidisciplinary

Architecture and magnetism of alnico

Lin Zhou et al.

ACTA MATERIALIA (2014)

Article Physics, Applied

Effect of Co on the thermal stability and magnetic properties of AlNiCo 8 alloys

Tao Liu et al.

JOURNAL OF APPLIED PHYSICS (2014)

Article Multidisciplinary Sciences

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz et al.

SCIENCE (2014)

Article Materials Science, Multidisciplinary

Experimental study on modulated structure in Alnico alloys under high magnetic field and comparison with phase-field simulation

X. Y. Sun et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2013)

Article Materials Science, Multidisciplinary

Prospects for Non-Rare Earth Permanent Magnets for Traction Motors and Generators

M. J. Kramer et al.

Article Materials Science, Multidisciplinary

Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy

S. Singh et al.

ACTA MATERIALIA (2011)

Review Chemistry, Multidisciplinary

Magnetic Materials and Devices for the 21st Century: Stronger, Lighter, and More Energy Efficient

Oliver Gutfleisch et al.

ADVANCED MATERIALS (2011)

Article Physics, Multidisciplinary

Novel Mixed-Mode Phase Transition Involving a Composition-Dependent Displacive Component

S. Nag et al.

PHYSICAL REVIEW LETTERS (2011)

Article Nanoscience & Nanotechnology

Microstructural development in equiatomic multicomponent alloys

B Cantor et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)