☆ 4.8 Article

Vat Photopolymerization Additive Manufacturing of Tough, Fully Recyclable Thermosets

ACS APPLIED MATERIALS & INTERFACES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Environmental

Recyclable and reprintable biobased photopolymers for digital light processing 3D printing

Guoqiang Zhu et al.

Summary: Developing recyclable biobased photopolymers for UV-curable 3D printing is essential for the sustainable development of the industry. Novel recyclable and reprintable castor oil-based photopolymers were successfully developed, which can be recycled at specific temperatures without the need for catalysts or solvents. The recycled resins have similar properties to the original resin, allowing for further printing. Additionally, the optimal biobased resin also enables the creation of reprintable sacrificial molds and thermochromic materials.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel Thiol-Ene Photo Resins for Stereolithography with Enhanced Mechanical and Optical Properties

Andreas Hoffmann et al.

Summary: This study investigates the rarely used thiol-ene click chemistry in stereolithography and develops new photo resins based on this chemistry. The resulting polymers are analyzed for their suitability as thiol-ene photo resins. The study also explores the influence of crosslinker functionality and the concept of prepolymerization of two bifunctional components for thiol-ene photo resins.

MACROMOLECULAR MATERIALS AND ENGINEERING (2022)

添加到收藏夹

Article Polymer Science

Spatial and Temporal Control of Photomediated Disulfide-Ene and Thiol-Ene Chemistries for Two-Stage Polymerizations

Shafer M. Soars et al.

Summary: A new strategy combining photomediated thiol-ene and disulfide-ene-based polymerization reactions is reported for the design and synthesis of high sulfur-containing materials for potential use in covalent adaptable networks and optical materials. By taking advantage of the relative reaction rates and semiorthogonally performing these reactions, controlled architecture polymer networks were produced. The study demonstrates the differential reaction rates between thiol-ene and disulfide-ene reactions, enabling spatial and temporal manipulation of material properties through dual-cure networks and photopatterning.

MACROMOLECULES (2022)

添加到收藏夹

Article Polymer Science

Controlled Degradation of Cast and 3-D Printed Photocurable Thioester Networks via Thiol-Thioester Exchange

Juan J. Hernandez et al.

Summary: This study examined and predicted the degradation of thioester-containing networks facilitated by base-catalyzed thiol-thioester exchange. A statistical model was developed and compared to experimental results, showing that degradation times could be controlled by varying reaction conditions. Thioester-based composite materials were successfully degraded, achieving high recovery of the composite filler.

MACROMOLECULES (2022)

添加到收藏夹

Article Polymer Science

Relaxation of Vitrimers with Kinetically Distinct Mixed Dynamic Bonds

Laura Porath et al.

Summary: Designing materials with tunable modulus and viscosity is crucial for various applications. Vitrimers, with their dynamic bond exchange mechanism, provide an ideal platform for viscoelastic design. By using different cross-linkers with varied functionalities and kinetics, control over cross-link density and exchange kinetics can be achieved. Furthermore, combining multiple cross-linkers into a single network allows for a better understanding of the effect of multiple dynamic bonds on the viscoelastic response.

MACROMOLECULES (2022)

添加到收藏夹

Article Polymer Science

Kinetic Analysis of Degradation in Thioester Cross-linked Hydrogels as a Function of Thiol Concentration, pKa, and Presentation

Benjamin J. Carberry et al.

Summary: This study characterizes the thiol-thioester exchange reaction in cross-linked poly(ethylene glycol) (PEG) hydrogels and identifies the significant role of network thiols liberated from exchanged thioester cross-links in hydrogel degradation, resulting in predictable changes in the storage modulus and nonideal mass loss profiles. These findings enable the design of on-demand degradable hydrogels with uniquely tunable degradation and mass loss.

MACROMOLECULES (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Fracture of model end-linked networks

Christopher W. Barney et al.

Summary: Advances in polymer chemistry have made it possible to synthesize molecularly precise polymer networks with homogeneous structure, allowing for the study of their elastic and failure properties. This study developed a theory of network fracture that accounts for loop defects and tested it against experimental measurements, providing new insights into network fracture mechanisms.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Functional Materials for DLP-SLA 3D Printing Using Thiol-Acrylate Chemistry: Resin Design and Postprint Applications

Lubna Shahzadi et al.

Summary: This study focuses on the design and optimization of thiol-acrylate resin formulations for stereolithography (SLA) 3D printing. The researchers successfully control the polymerization depth of the cured polymer layer and achieve optically transparent and colorless printed objects with good resolution. They also demonstrate the feasibility of postprint surface modifications by grafting various polymer chains and immobilizing nanoparticles. These thiol-acrylate resins show great potential for commercial applications.

ACS APPLIED POLYMER MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Additive Manufacture of Dynamic Thiol-ene Networks Incorporating Anhydride-Derived Reversible Thioester Links

Maciej Podgorski et al.

Summary: A photoprintable dynamic thiol-ene resin was developed for 3D printing, with optimized curing properties and high conversion rates achieved within a short period of time. The dynamic chemistry allowed for rapid reversible exchange, enabling reconfiguration and depolymerization of printed objects at specific temperature ranges, showing potential for new applications in shape memory and 4D printable functional materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recyclable thermosetting polymers for digital light processing 3D printing

Zhiqiang Chen et al.

Summary: The 3D printing of various polymers has developed rapidly in recent years, with digital light processing (DLP) emerging as a popular technique due to its high resolution and speed. However, the lack of printable high-performance materials limits its applications. A two-stage curing approach involving dynamic reactions was proposed for recyclable DLP 3D printing of high-performance thermosetting polymers, showing potential for green manufacturing technologies.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stereochemistry-Controlled Mechanical Properties and Degradation in 3D-Printable Photosets

Anissa L. Khalfa et al.

Summary: Stereochemistry is a powerful tool to modify the mechanical properties and degradation rates of photocurable materials by controlling the stereochemistry of pre-resin oligomers. The synthesis of stereopure pre-polymers and retention of stereochemistry during UV-triggered crosslinking enable the formulation of materials with different mechanical properties. This approach allows for the creation of high-resolution, three-dimensional printed scaffolds with varying stiffness, toughness, and degradability from the same components.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dissociative Carbamate Exchange Anneals 3D Printed Acrylates

Leslie S. Hamachi et al.

Summary: By incorporating carbamate bonds capable of undergoing dissociative exchange reactions and appropriate catalysts, the interlayer network formation and self-healing properties of VP-printed materials can be improved, enhancing material properties and Young's modulus.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Additives for Ambient 3D Printing with Visible Light

Dowon Ahn et al.

Summary: 3D printing technology has made remarkable advancements in recent years, but the range of printable materials is still narrow compared to other manufacturing forms. Light-driven polymerization methods using visible light show promise for addressing issues related to UV light, however, there are still technical challenges that need to be overcome.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Chemical and Mechanical Tunability of 3D-Printed Dynamic Covalent Networks Based on Boronate Esters

Lindsay L. Robinson et al.

Summary: This study demonstrates the development of catalyst-free, 3D-printing resins using boronate esters, which allow room-temperature exchange at cross-linking sites and modulate the dynamic character of 3D-printed objects for postprinting functionalization. The combination of dynamic and static resins enables a balance between structural stability and rapid exchange in printed parts, with the ability to modulate cross-linking density postprinting.

ACS MACRO LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hydrogenolysis of Polypropylene and Mixed Polyolefin Plastic Waste over Ru/C to Produce Liquid Alkanes

Julie E. Rorrer et al.

Summary: Catalytic depolymerization of polyolefins is a promising chemical recycling strategy utilizing noble metal and hydrogen for breaking strong C-C bonds. The study investigated the conversion of polypropylene under mild conditions, demonstrating trade-offs between product yield and temperature, hydrogen pressure, and reaction time. The characterized catalyst was found to be recyclable and effective in depolymerizing a mixture of high-density polyethylene and PP, showcasing feasibility for mixed polyolefin waste streams.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

添加到收藏夹

Article Engineering, Manufacturing

Effect of material extrusion process parameters on filament geometry and inter-filament voids in as-fabricated high solids loaded polymer composites

Sungwoo Jang et al.

Summary: This study examines the effects of four key process parameters on filament geometry and interfilament void formation in high solids loaded polymer composites printed via material extrusion additive manufacturing. It found that layer height plays the most significant role in line aspect ratios and void formation in printed structures. The results suggest a method to control porosity in fully dense structures with high solids loaded inks using the layer height parameter while maintaining geometric accuracy.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Layer-by-Layer Printing of Photopolymers in 3D: How Weak is the Interface?

H. Gojzewski et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

A Review of 3D Printing Technologies for Soft Polymer Materials

Lu-Yu Zhou et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Isotactic Poly(propylene oxide): A Photodegradable Polymer with Strain Hardening Properties

Bryce M. Lipinski et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Article Polymer Science

100th Anniversary of Macromolecular Science Viewpoint: Integrating Chemistry and Engineering to Enable Additive Manufacturing with High-Performance Polymers

Andrew J. Boydston et al.

ACS MACRO LETTERS (2020)

添加到收藏夹

Article Polymer Science

Thermal Guanidine Metathesis for Covalent Adaptable Networks

Alberto J. Melchor Banales et al.

ACS MACRO LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Using Visible Light to Tune Boronic Acid-Ester Equilibria

Joseph Accardo et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Article Polymer Science

Additive manufacture of lightly crosslinked semicrystalline thiol-enes for enhanced mechanical performance

Kimberly K. Childress et al.

POLYMER CHEMISTRY (2020)

添加到收藏夹

Article Polymer Science

Mixed mechanisms of bond exchange in covalent adaptable networks: monitoring the contribution of reversible exchange and reversible addition in thiol-succinic anhydride dynamic networks

Maciej Podgorski et al.

POLYMER CHEMISTRY (2020)

添加到收藏夹

Article Polymer Science

Catalyst-Free Vitrimers from Vinyl Polymers

Jacob J. Lessard et al.

MACROMOLECULES (2019)

添加到收藏夹

Review Chemistry, Applied

Enabling Applications of Covalent Adaptable Networks

Matthew K. McBride et al.

ANNUAL REVIEW OF CHEMICAL AND BIOMOLECULAR ENGINEERING, VOL 10 (2019)

添加到收藏夹

Review Engineering, Chemical

110th Anniversary: Vat Photopolymerization-Based Additive Manufacturing: Current Trends and Future Directions in Materials Design

Gayan A. Appuhamillage et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

添加到收藏夹

Article Engineering, Industrial

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

Peng Wang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

添加到收藏夹

Article Polymer Science

Reprocessing Cross-Linked Polyurethanes by Catalyzing Carbamate Exchange

David J. Fortman et al.

MACROMOLECULES (2019)

添加到收藏夹

Article Polymer Science

Elasticity and Relaxation in Full and Partial Vitrimer Networks

Fanlong Meng et al.

MACROMOLECULES (2019)

添加到收藏夹

Article Engineering, Manufacturing

3D printing of high density polyethylene by fused filament fabrication

Carl G. Schirmeister et al.

ADDITIVE MANUFACTURING (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Adaptable Crosslinks in Polymeric Materials: Resolving the Intersection of Thermoplastics and Thermosets

Georg M. Scheutz et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

添加到收藏夹

Article Polymer Science

Sustainable near UV-curable acrylates based on natural phenolics for stereolithography 3D printing

Rui Ding et al.

POLYMER CHEMISTRY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Photopolymerized Triazole-Based Glassy Polymer Networks with Superior Tensile Toughness

Han Byul Song et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Polymer Science

Synthesis and properties of semi-crystalline poly(decamethylene terephthalamide) thermosets from reactive side-group copolyamides

Ming Li et al.

EUROPEAN POLYMER JOURNAL (2018)

添加到收藏夹

Article Polymer Science

Tough, stable spiroacetal thiol-ene resin for 3D printing

Dalton G. Sycks et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

添加到收藏夹

Article Polymer Science

Vitrimers Designed Both To Strongly Suppress Creep and To Recover Original Cross-Link Density after Reprocessing: Quantitative Theory and Experiments

Lingqiao Li et al.

MACROMOLECULES (2018)

添加到收藏夹

Article Engineering, Mechanical

Effects of micro particle reinforcement on mechanical properties of 3D printed parts

Ebubekir Canti et al.

RAPID PROTOTYPING JOURNAL (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Bistable and photoswitchable states of matter

Brady T. Worrell et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Reprocessable thermosets for sustainable three-dimensional printing

Biao Zhang et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Polymer Science

Vitrimeric Silicone Elastomers Enabled by Dynamic Meldrum's Acid-Derived Cross-Links

Jacob S. A. Ishibashi et al.

ACS MACRO LETTERS (2018)

添加到收藏夹

Article Polymer Science

Bronsted-Acid-Catalyzed Exchange in Polyester Dynamic Covalent Networks

Jeffrey L. Self et al.

ACS MACRO LETTERS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recycling of Epoxy Thermoset and Composites via Good Solvent Assisted and Small Molecules Participated Exchange Reactions

Xiao Kuang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

How to Design a Self-Healing Polymer: General Concepts of Dynamic Covalent Bonds and Their Application for Intrinsic Healable Materials

Jan Dahlke et al.

ADVANCED MATERIALS INTERFACES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Highly stable thiol-ene systems: from their structure-property relationship to DLP 3D printing

Li Chen et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

添加到收藏夹

Article Engineering, Manufacturing

Interlayer bonding improvement of material extrusion parts with polyphenylene sulfide using the Taguchi method

Emily R. Fitzharris et al.

ADDITIVE MANUFACTURING (2018)

添加到收藏夹

Article Polymer Science

Effects of styrene-acrylonitrile contents on the properties of ABS/SAN blends for fused deposition modeling

Jin Zhu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

添加到收藏夹

Article Materials Science, Composites

Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties

Fuda Ning et al.

JOURNAL OF COMPOSITE MATERIALS (2017)

添加到收藏夹

Article Engineering, Environmental

Combined Effects of UV Exposure Duration and Mechanical Abrasion on Microplastic Fragmentation by Polymer Type

Young Kyoung Song et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Chemical control of the viscoelastic properties of vinylogous urethane vitrimers

Wim Denissen et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Engineering, Biomedical

Extrusion Bioprinting of Shear-Thinning Gelatin Methacryloyl Bioinks

Wanjun Liu et al.

ADVANCED HEALTHCARE MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recyclable 3D printing of vitrimer epoxy

Qian Shi et al.

MATERIALS HORIZONS (2017)

添加到收藏夹

Article Polymer Science

Thiol-Trifluorovinyl Ether (TFVE) Photopolymerization: An On-Demand Synthetic Route to Semifluorinated Polymer Networks

Brian R. Donovan et al.

MACROMOLECULES (2016)

添加到收藏夹

Article Polymer Science

Dynamic Thiol-Michael Chemistry for Thermoresponsive Rehealable and Malleable Networks

Borui Zhang et al.

MACROMOLECULES (2016)

添加到收藏夹

Review Multidisciplinary Sciences

Printing soft matter in three dimensions

Ryan L. Truby et al.

NATURE (2016)

添加到收藏夹

Article Chemistry, Physical

Biomimetic 4D printing

A. Sydney Gladman et al.

NATURE MATERIALS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Quantifying the impact of molecular defects on polymer network elasticity

Mingjiang Zhong et al.

SCIENCE (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Direct 3D Printing of Shear-Thinning Hydrogels into Self-Healing Hydrogels

Christopher B. Highley et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Sequential Thiol Click Reactions: Formation of Ternary Thiourethane/Thiol-Ene Networks with Enhanced Thermal and Mechanical Properties

Olivia D. McNair et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solvent-Cast Three-Dimensional Printing of Multifunctional Microsystems

Shuang-Zhuang Guo et al.

SMALL (2013)

添加到收藏夹

Article Polymer Science

Inherently Photohealable and Thermal Shape-Memory Polydisulfide Networks

Brian T. Michal et al.

ACS MACRO LETTERS (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Olefin Metathesis for Effective Polymer Healing via Dynamic Exchange of Strong Carbon-Carbon Double Bonds

Yi-Xuan Lu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Metal-Catalyzed Transesterification for Healing and Assembling of Thermosets

Mathieu Capelot et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

添加到收藏夹

Article Multidisciplinary Sciences

Silica-Like Malleable Materials from Permanent Organic Networks

Damien Montarnal et al.

SCIENCE (2011)

添加到收藏夹

Review Chemistry, Multidisciplinary

Thiol-Ene Click Chemistry

Charles E. Hoyle et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2010)

添加到收藏夹

Article Chemistry, Physical

Thiol-Isocyanate-Ene Ternary Networks by Sequential and Simultaneous Thiol Click Reactions

Junghwan Shin et al.

CHEMISTRY OF MATERIALS (2010)

添加到收藏夹

Article Polymer Science

Segmented Polythiourethane Elastomers through Sequential Thiol-Ene and Thiol-Isocyanate Reactions

Junghwan Shin et al.

MACROMOLECULES (2009)

添加到收藏夹

Article Polymer Science

Photo-crosslinked poly(ε-caprolactone fumarate) networks: Roles of crystallinity and crosslinking density in determining mechanical properties

Shanfeng Wang et al.

POLYMER (2008)

添加到收藏夹

Review Materials Science, Multidisciplinary

On the natural draw ratio of semi-crystalline polymers:: Review of the mechanical, physical and molecular aspects

Roland Seguela

MACROMOLECULAR MATERIALS AND ENGINEERING (2007)

添加到收藏夹

Article Multidisciplinary Sciences

Photoinduced plasticity in cross-linked polymers

TF Scott et al.

SCIENCE (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.