☆ 4.0 Article

Evaluation of Some Composite Paint Coatings’ Appearance Quality Using Fractal Dimension

Journal of Composites Science (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Physical analysis and statistical investigation of tensile and fatigue behaviors of glass fiber-reinforced polyester via novel fibers arrangement

Mahmoud Yousry Mahmoud Zaghloul et al.

Summary: This study investigates the effect of fiber arrangement on the mechanical characteristics of glass fiber-reinforced polymeric materials. Experimental results show that surface reinforced arranged (SRA) samples have significantly longer lifespan after bending fatigue compared to unreinforced (UR) and bulk reinforced arranged (BRA) samples, indicating the potential of SRA design for cost reduction and quality improvement.

JOURNAL OF COMPOSITE MATERIALS (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Unveiling the mystery of scale dependence of surface roughness of natural rock joints

Yingchun Li et al.

Summary: The scale dependency of surface roughness of natural rock joints varies across scales without general trends and lacks a stationary threshold. Controversial results regarding scale effects are likely due to the composition of the roughness scaling of waviness and unevenness.

SCIENTIFIC REPORTS (2022)

添加到收藏夹

Article Engineering, Civil

Changes in fractal dimension and durability of ultra-high performance concrete (UHPC) with silica fume content

Congqi Luan et al.

Summary: The combined utilization of silica fume and steel fiber in UHPC can improve its mechanical properties and durability. The study investigates the influence of silica fume dosage on the properties of UHPC and reveals the relationships between durability, porosity, and fractal dimension.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2022)

添加到收藏夹

Article Mechanics

A fractal crazing constitutive model of glassy polymers considering damage and toughening

Yong Li et al.

Summary: The study establishes and validates the evolutionary framework of crazing in creep of glassy polymers using fractal theory. A new fractal dimension calculation method is defined and the corresponding crazing variable is modified to eliminate the influence of deformation. The experimental results are in agreement with the theoretical model, confirming the accuracy of the model.

ENGINEERING FRACTURE MECHANICS (2022)

添加到收藏夹

Article Polymer Science

Influence of Stress Level and Fibre Volume Fraction on Fatigue Performance of Glass Fibre-Reinforced Polyester Composites

Mahmoud Yousry Zaghloul et al.

Summary: Fibre-reinforced polymeric composite materials are increasingly being used in the repair and replacement of metallic materials due to their high stiffness. This study investigates the effects of fibre volume fraction and stress level on the fatigue performance of glass fibre-reinforced polyester (GFRP) composites, and validates prediction models for fatigue life.

POLYMERS (2022)

添加到收藏夹

Article Engineering, Chemical

Fractal dimensions of blast-cleaned steel surfaces and their effects on the adhesion of polymeric foil systems with integrated pressure-sensitive adhesives

T. Marquardt et al.

Summary: The morphology and structure of substrate surfaces are crucial for the adhesion of protective layers. This study investigated the impact of surface profile parameters on the adhesion of polymeric foil systems by preparing mild steel samples with different surface configurations. Fractal dimensions were found to be more accurate than conventional roughness parameters in quantifying adhesion.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Statistical and qualitative analyses of the kinetic models using electrophoretic deposition of polyaniline

Mohammed Fuseini et al.

Summary: This study investigates the kinetics of electrophoretic deposition (EPD) process of polyaniline (PANI) using response surface methodology (RSM). The influence of EPD parameters on the properties of deposited films is analyzed, and the characteristics of particles are evaluated through particle size and zeta potential analyses. The study is significant for predicting thermal stability and preventing thermal degradation in polymer products.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Applied

Investigation of Electrophoretic Deposition of PANI Nano fibers as a Manufacturing Technology for corrosion protection

Mohammed Fuseini et al.

Summary: This study describes the electrophoretic deposition process of polyaniline film using three models and analyzes its effects on film properties. The results show a linear deposition growth law and a transition in deposition mechanism from linear mode to parabolic.

PROGRESS IN ORGANIC COATINGS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Generating prediction model of fan width by optimizing paint application process for Electrostatic Rotary Bell atomizer

Fairus Tanzim et al.

Summary: Fan width is crucial in the paint spray application process. A predictive model based on application inputs can improve efficiency and achieve uniform paint distribution.

RESULTS IN ENGINEERING (2022)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

EFFECTS OF FINENESS AND CONTENT OF PHOSPHORUS SLAG ON CEMENT HYDRATION, PERMEABILITY, PORE STRUCTURE AND FRACTAL DIMENSION OF CONCRETE

Lei Wang et al.

Summary: The study reveals that the fineness and content of PHS have significant effects on the hydration, mechanical strength, and pore structure of concrete. By controlling the fineness and content of PHS, the negative impact on the early strength of concrete can be mitigated. The concrete added with finely ground PHS shows higher compressive strength and better pore structure refinement at both early and late ages.

FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY (2021)

添加到收藏夹

Review Mechanics

Developments in polyester composite materials - An in-depth review on natural fibres and nano fillers

Mahmoud Yousry Mahmoud Zaghloul et al.

Summary: This review article examines the use of various reinforcing elements, such as nano fillers and natural fibers, in the manufacturing of polyester-based composite materials. It also analyzes the manufacturing conditions of reinforced particle PMCs and provides a comprehensive overview of the applications of nano particles and natural fibers in composite materials.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Chemistry, Physical

Evaluation of Mode II Fracture Toughness of Hybrid Fibrous Geopolymer Composites

Sallal R. Abid et al.

Summary: Steel fibers play a vital role in enhancing fracture toughness, with mixtures S1.6 and S1.3G0.3 showing the best performance. Increasing notch depth decreases fracture toughness in an approximately linear decrement fashion. The use of double-notched cubes results in significantly higher fracture toughness compared to the Brazilian notched discs.

MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Hydration, shrinkage, pore structure and fractal dimension of silica fume modified low heat Portland cement-based materials

Lei Wang et al.

Summary: The addition of silica fume accelerates hydration of low heat Portland cement and consumes Ca(OH)(2), leading to excellent performance in concrete with 8% silica fume. Fractal dimension (D-s) can be used as a new parameter to evaluate the shrinkage behavior of concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of thermal degradation of polymer on redox initiated fractal geometries

Indira Pandey et al.

Summary: Redox initiated fractal patterns in temperature treated chitosan-AgNO 3 complex were studied, investigating the effects of different temperatures and reaction rates on the growth mechanism of silver aggregates. Structural analysis was done through FTIR measurement and scanning electron microscopy, revealing an increase in branch thickness for higher temperature treated samples.

CHEMICAL PHYSICS IMPACT (2021)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Influence of Different Alkali Sulfates on the Shrinkage, Hydration, Pore Structure, Fractal Dimension and Microstructure of Low-Heat Portland Cement, Medium-Heat Portland Cement and Ordinary Portland Cement

Yang Li et al.

Summary: This study investigates the impacts of different alkali sulfates on the shrinkage, hydration, pore structure, fractal dimension, and microstructure of cement-based materials. The results show that alkali sulfates magnify the shrinkage of cement-based materials, mainly due to different pore structures and hydration processes. K2SO4 (K alkali) significantly contributes to the promotion effect of shrinkage on cement-based materials.

FRACTAL AND FRACTIONAL (2021)

添加到收藏夹

Article Engineering, Ocean

Systematic investigation of coating application methods and soft paint types to detect cavitation erosion on marine propellers

Batuhan Aktas et al.

APPLIED OCEAN RESEARCH (2020)

添加到收藏夹

Article Polymer Science

Fractal dimensional analysis on dispersion/aggregation state of MWCNT in poly(4-chloromethyl)styrene: effect of UV-induced polymer-MWCNT chemical bond formation and its influence on electrical conductivity of their composites

Tomoya Takada et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2020)

添加到收藏夹

Article Construction & Building Technology

Mathematical model for characterizing the full process of volatile organic compound emissions from paint film coating on porous substrates

Xiaojun Zhou et al.

BUILDING AND ENVIRONMENT (2020)

添加到收藏夹

Review Engineering, Chemical

A review on fractal footprint of cement-based materials

Shengwen Tang et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Microscopy

Multi-modal plasma focused ion beam serial section tomography of an organic paint coating

Zhong Xiangli et al.

ULTRAMICROSCOPY (2019)

添加到收藏夹

Article Construction & Building Technology

Performance Properties of High-Density Impermeable Cementitious Paste

Roman Fediuk et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)

添加到收藏夹

Article Construction & Building Technology

Fractal dimension of concrete incorporating silica fume and its correlations to pore structure, strength and permeability

Qing Lu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Engineering, Mechanical

A Comparative Study on Equivalent Modeling of Rough Surfaces Contact

Xi Shi et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Physics, Multidisciplinary

Self-interacting polymer chains terminally anchored to adsorbing surfaces of three-dimensional fractal lattices

I. Zivic et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2018)

添加到收藏夹

Article Polymer Science

Mechanical properties of linear low-density polyethylene fire-retarded with melamine polyphosphate

Moustafa Mahmoud Yousry Mahmoud Zaghloul

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

添加到收藏夹

Article Materials Science, Characterization & Testing

Experimental and modeling analysis of mechanical-electrical behaviors of polypropylene composites filled with graphite and MWCNT fillers

Moustafa Mahmoud Yousry Zaghloul et al.

POLYMER TESTING (2017)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Fractal-fractional differentiation and integration: Connecting fractal calculus and fractional calculus to predict complex system

Abdon Atangana

CHAOS SOLITONS & FRACTALS (2017)

添加到收藏夹

Article Construction & Building Technology

Fractal analysis of relation between strength and pore structure of hardened mortar

Shanshan Jin et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Self-cleaning ability of titanium dioxide clear paint coated architectural mortar and its potential in field application

Ming-Zhi Guo et al.

JOURNAL OF CLEANER PRODUCTION (2016)

添加到收藏夹

Proceedings Paper Energy & Fuels

Application of electron microscopy method for quality control of paint coating surface

L. G. Varepo et al.

OIL AND GAS ENGINEERING (OGE-2015) (2015)

添加到收藏夹

Article Engineering, Mechanical

A complete contact model of a fractal rough surface

Xiaomei Miao et al.

WEAR (2014)

添加到收藏夹

Article Archaeology

A procedure to assess the suitability of plaster to protect vernacular earthen architecture

Erwan Hamard et al.

JOURNAL OF CULTURAL HERITAGE (2013)

添加到收藏夹

Article Architecture

Nano-Lime for Consolidation of Plaster and Stone

Paul D'Armada et al.

JOURNAL OF ARCHITECTURAL CONSERVATION (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ranking high-quality paint systems using EIS. Part 1: intact coatings

CG Oliveira et al.

CORROSION SCIENCE (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ranking high-quality paint systems using EIS. Part II: defective coatings

CG Oliveira et al.

CORROSION SCIENCE (2003)

添加到收藏夹

Article Chemistry, Analytical

Certified reference materials for the quality control of inorganic analyses of manufactured products (glass, polymers, paint coatings)

P Quevauviller

TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.