4.8 Article

Fabrication of thermoplastic polyurethane composites with a high dielectric constant and thermal conductivity using a hybrid filler of CNT@BaTiO3

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Nanoscience & Nanotechnology

Obtaining Greatly Improved Dielectric Constant in BaTiO3-Epoxy Composites with Low Ceramic Volume Fraction by Enhancing the Connectivity of Ceramic Phase

Meng Cao et al.

Summary: This study demonstrates a strategy to overcome the challenge of obtaining a high dielectric constant in ceramic-polymer composites with low ceramic volume fraction. By using a high sintering temperature and introducing a porogen, the researchers were able to obtain BaTiO3 ceramics with high porosity and great connectivity. The composites prepared with these ceramics showed improved dielectric constants at low ceramic volume fractions. The composite with a sintering temperature of 1300 degrees C and a ceramic volume fraction of 38.1% exhibited a dielectric constant of 466.8, which was about nine times higher compared to the counterpart with a higher ceramic volume fraction of 60.8%. The composite also exhibited low dielectric loss and good frequency and temperature stability, indicating its potential for practical applications. Finite element simulation showed that the enhanced connectivity of BaTiO3 played a key role in the dielectric response of the composite.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Engineering, Multidisciplinary

Simultaneously achieving high energy-storage efficiency and density in Bi-modified SrTiO3-based relaxor ferroelectrics by ion selective engineering

Yuqin Ding et al.

Summary: Through ion selective engineering, Bi-modified SrTiO3 solid-solution ceramics demonstrate excellent performance in energy efficiency, energy density, and thermal stability, offering potential solutions for electrostatic energy storage applications.

COMPOSITES PART B-ENGINEERING (2022)

Article Engineering, Multidisciplinary

An electrospinning-electrospraying technique for connecting electrospun fibers to enhance the thermal conductivity of boron nitride/polymer composite films

Han Wang et al.

Summary: The study demonstrates the first use of electrospinning-electrospraying method to prepare high-thermal-conductivity composite materials, showing great potential for thermal management applications.

COMPOSITES PART B-ENGINEERING (2022)

Article Materials Science, Multidisciplinary

Structural, thermal and dielectric behaviour of exfoliated graphite nanoplatelets (xGnP) filled EVA/EOC blend composites

Suryakanta Parida et al.

Summary: The research focuses on nano-composites of xGnP filled EVA/EOC blend, analyzing its thermal, dielectric, and conducting properties. The study shows that increasing xGnP content improves crystallization temperature, stability, and conductivity in the composites, but there is an optimal loading level for these enhancements.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2022)

Article Materials Science, Multidisciplinary

High dielectric constant and low-loss, carbon black/CaCu3Ti4O12/epoxy composites for embedded capacitor applications

Lakshmi Variar et al.

Summary: In this study, a low-cost three-phase epoxy resin composite using calcium copper titanate (CCTO) and carbon black (CB) as fillers was developed for meeting the growing demand for miniaturization and increased functionality of electronic devices. The dielectric, mechanical, and dynamic mechanical properties of the composites were investigated by preparing them using solution casting method and characterizing them using scanning electron microscopy and X-ray diffraction analysis.

MATERIALS RESEARCH BULLETIN (2022)

Article Nanoscience & Nanotechnology

Obtaining Greatly Improved Dielectric Constant in BaTiO3-Epoxy Composites with Low Ceramic Volume Fraction by Enhancing the Connectivity of Ceramic Phase

Meng Cao et al.

Summary: This study demonstrates a strategy to obtain high dielectric constant (εr) BaTiO3 ceramics with improved connectivity and high porosity, leading to the preparation of composites with enhanced εr at low ceramic volume fraction. These composites show low dielectric loss, good frequency and temperature stability, and great potential for practical applications.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Engineering, Environmental

Polymer composites with expanded graphite network with superior thermal conductivity and electromagnetic interference shielding performance

Baojie Wei et al.

Summary: A method was developed to fabricate enhanced 3D expanded graphite (EG) network by pre-melt blending of EG with stearic acid and polyethylene wax, followed by powder mixing and thermal molding with linear low-density polyethylene (LLDPE) particles. The introduction of small molecular compounds significantly reduced micro gaps in EG, leading to increased thermal conductivity to ultrahigh levels.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Materials Science, Characterization & Testing

Improvement of dielectric properties and thermal conductivity of TPU with alumina-encapsulated rGO

Eyob Wondu et al.

Summary: This study focuses on the fabrication of thermoplastic polyurethane (TPU) composites with high thermal conductivity and dielectric constants, which can be used in electronic devices that are able to store charge and dissipate heat. The composites showed promising characteristics in terms of charge storage, heat dissipation, and mechanical properties. The thermal conductivity of the composite was significantly higher and the dielectric property was better compared to other investigated composites.

POLYMER TESTING (2021)

Article Engineering, Environmental

Thermal stable honokiol-derived epoxy resin with reinforced thermal conductivity, dielectric properties and flame resistance

Jingjing Meng et al.

Summary: Novel polymers based on naturally available honokiol were fabricated to produce renewable and functional epoxy resins, showing excellent thermal stability, conductivity, high specific heat, dielectric properties, and low flammability. The high-performing networks have great potential applications in the electronics and microelectronics industry.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Manufacturing

Selective distribution of SrTiO3 in co-continuous composites: An effective method to improve the dielectric and mechanical properties

Zepeng Mao et al.

Summary: Tailoring the distribution of functional fillers in a co-continuous polymeric matrix through altering mixing sequence and adjusting wetting coefficient can improve the dielectric properties and mechanical performance of composites.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Chemistry, Physical

Synthesis, thermal and dielectric performance of PVA-SrTiO3 polymer nanocomposites

T. A. Taha et al.

Summary: The paper discusses the successful production of PVA-SrTiO3 nanocomposite films through the conventional solution-mixing route, showcasing improved thermal stability and dielectric properties. The addition of nano-SrTiO3 altered the position of PVA absorption bands and the dielectric constant varied with SrTiO3 content, reaching its peak at 15.0 wt%. Energy density of the composite films was lower than pure PVA, and both AC and DC electrical conductivity showed slight changes with SrTiO3 concentration.

JOURNAL OF MOLECULAR STRUCTURE (2021)

Article Polymer Science

Enhanced dielectric properties and breakdown strength of polymer/carbon nanotube composites by coating an SrTiO3 layer

Ruolin Han et al.

Summary: In this study, a core-shell structured hybrid powder (STO@MWCNTs) was prepared by coating strontium titanate (STO) on the surface of carbon nanotubes (MWCNTs) using a sol-gel method. This powder was then added to polydimethylsiloxane to create a flexible high-K composite. The STO coating effectively prevented the overlap and agglomeration of MWCNTs, improving the dielectric properties of the composite.

E-POLYMERS (2021)

Article Chemistry, Physical

Frequency-dependent dielectric constant prediction of polymers using machine learning

Lihua Chen et al.

NPJ COMPUTATIONAL MATERIALS (2020)

Article Engineering, Manufacturing

Vertically aligned silicon carbide nanowires/reduced graphene oxide networks for enhancing the thermal conductivity of silicone rubber composites

Jianan Song et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Article Multidisciplinary Sciences

Ultralow-dielectric-constant amorphous boron nitride

Seokmo Hong et al.

NATURE (2020)

Article Engineering, Manufacturing

Covalent coupling regulated thermal conductivity of poly(vinyl alcohol)/boron nitride composite film based on silane molecular structure

Hua Cheng et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Article Engineering, Manufacturing

Novel nitrile-butadiene rubber composites with enhanced thermal conductivity and high dielectric constant

Dan Yang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Article Engineering, Manufacturing

Fabrication of core-shell structured Ni@BaTiO3 scaffolds for polymer composites with ultrahigh dielectric constant and low loss

Xiaotong Zhu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Article Chemistry, Multidisciplinary

Large Dielectric Constant Enhancement in MXene Percolative Polymer Composites

Shaobo Tu et al.

ACS NANO (2018)

Article Materials Science, Ceramics

Effect of surface-modified Al2O3 on the thermomechanical properties of polybutylene succinate/Al2O3 composites

Zelalem Lule et al.

CERAMICS INTERNATIONAL (2018)

Article Engineering, Manufacturing

High-energy-density with polymer nanocomposites containing of SrTiO3 nanofibers for capacitor application

Lingmin Yao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Article Engineering, Electrical & Electronic

Multi-Band RF Planar Sensor Using Complementary Split Ring Resonator for Testing of Dielectric Materials

M. Arif Hussain Ansari et al.

IEEE SENSORS JOURNAL (2018)

Article Engineering, Manufacturing

Spatial Confining Forced Network-Assembly for preparation of high-performance conductive polymeric composites

Daming Wu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Review Polymer Science

Thermal conductivity of polymer-based composites: Fundamentals and applications

Hongyu Chen et al.

PROGRESS IN POLYMER SCIENCE (2016)

Article Engineering, Manufacturing

Effect of silica coating thickness on the thermal conductivity of polyurethane/SiO2 coated multiwalled carbon nanotube composites

Jinchao Zhao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

Article Materials Science, Composites

High-performance epoxy/silica coated silver nanowire composites as underfill material for electronic packaging

Chao Chen et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

Article Thermodynamics

Multi-walled carbon nanotubes coated by multi-layer silica for improving thermal conductivity of polymer composites

Jiaxi Guo et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2013)

Article Chemistry, Physical

Efficient hydroxylation of BaTiO3 nanoparticles by using hydrogen peroxide

Chia-Chen Li et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2010)

Article Chemistry, Physical

The adsorption of cationic surfactants on BN surface: Its effects on the thermal conductivity and mechanical properties of BN-epoxy composite

Karnthidaporn Wattanakul et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2010)

Article Materials Science, Multidisciplinary

Influence of interfacial modification on the thermal conductivity of polymer composites

Bin Lee et al.

JOURNAL OF MATERIALS SCIENCE (2009)

Article Biochemistry & Molecular Biology

A high strength nanocomposite based on microcrystalline cellulose and polyurethane

Qiuju Wu et al.

BIOMACROMOLECULES (2007)