☆ 4.7 Article

Thermal process simulation and multi-variable study/optimization of a novel geothermal-driven multi-generation process using bi-evaporator with zeotropic mixture

CASE STUDIES IN THERMAL ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Marine

The constitutive behavior and dissociation effect of hydrate-bearing sediment within a granular thermodynamic framework

Bing Bai et al.

Summary: A multiphase constitutive model of hydrate-bearing sediment is established within a granular thermodynamic framework, considering the energy dissipation caused by hydrate dissociation and granular rearrangement at the micro level. This model captures the complex behavior of the sediment by incorporating the nonlinear expression of bonding stress, considering the relative velocities of the gas and liquid phases, and introducing the coupling effect of heat conduction.

OCEAN ENGINEERING (2023)

添加到收藏夹

Review Engineering, Mechanical

Biological Stability of Water-Based Cutting Fluids: Progress and Application

Lizhi Tang et al.

Summary: The use of cutting fluid in engineering manufacturing is crucial for processing efficiency and surface quality. However, the long-term recycling of water-based cutting fluid can lead to deterioration and breeding of bacteria, causing failures and increased costs. This article discusses the mechanisms of action of additives and microbial metabolites, the denaturation mechanisms and efficiency of traditional bactericides, the disruption of cell membranes by nanomaterials, and the destruction of bacterial genetic material by ultraviolet rays and ozone. The evaluation of various sterilization methods provides insights into improving the biological stability of cutting fluid.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Aerospace

Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: From mechanisms to application

Xin Cui et al.

Summary: Replacing flood and dry machining with minimum quantity lubrication (MQL) technology is an inevitable trend of sustainable manufacturing. However, MQL cannot meet the high demand for cooling and lubrication in the machining of aeronautical difficult-to-machine materials. This study focuses on the comprehensive quantitative assessment of tribological characteristics in titanium alloy and nickel alloy machining using nano-biolubricants, specifically non-toxic carbon group nano-enhancers (CGNs), aiming to systematically answer the machining mechanisms under lubrication of CGNs.

CHINESE JOURNAL OF AERONAUTICS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Energy harvesting feasibility from photovoltaic/thermal (PV/T) hybrid system with Ag/Cr2O3-glycerol nanofluid optical filter

Mehran Hashemian et al.

Summary: In this study, a new nanofluid-based optical filter was designed and tested for a photovoltaic/thermal hybrid system. The filter showed outstanding properties such as simple synthesis method, desirable transmittance, high stability of nanoparticles, low-cost production process, and acceptable overall efficiency. The results demonstrated that the addition of nanoparticles can improve photothermal and photoelectric conversion efficiency, leading to higher energy efficiency of the system.

RENEWABLE ENERGY (2022)

添加到收藏夹

Article Thermodynamics

Wellbore cooling and heat energy utilization method for deep shale gas horizontal well drilling

Dong Xiao et al.

Summary: This study highlights the characteristics of deep shale gas drilling process and develops a transient model of wellbore temperature distribution. It emphasizes the effectiveness of insulated drill pipes in reducing wellbore temperature and establishes a system for wellbore cooling and heat energy utilization based on insulated drill pipes and organic Rankine cycle.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Geochemistry & Geophysics

Third-Order Pade Thermoelastic Constants of Solid Rocks

Jian Yang et al.

Summary: This study proposes a thermoelastic model using the Pade rational function to characterize the temperature-induced velocity changes in solid rocks. The results show that the Pade model provides a more accurate description of the velocity changes, especially for solid rocks at high temperatures, compared to the conventional Taylor thermoelastic prediction.

JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2022)

添加到收藏夹

Article Energy & Fuels

Performance evaluation of graphene-enhanced LPG in a vapour compression refrigeration system: An experimental approach

T. O. Babarinde et al.

Summary: This study investigated the use of graphene-nanolubricant in a domestic refrigerator system to improve the performance of liquefied petroleum gas. The results showed that the graphene-nanolubricant reduced the compressor input and increased the refrigerating effect.

ENERGY REPORTS (2022)

添加到收藏夹

Article Thermodynamics

Predictions of flow and temperature fields in a T-junction based on dynamic mode decomposition and deep learning

Zhiwen Huang et al.

Summary: This study proposes an accurate flow field and temperature field prediction method combining Dynamic Mode Decomposition (DMD) and deep learning. Through experimental comparison of flow field and temperature field prediction in a T-junction, it is found that the method combining DMD and ConvLSTM is the most accurate and stable prediction method.

ENERGY (2022)

添加到收藏夹

Article Thermodynamics

BUILDING ENERGY OPTIMIZATION USING BUTTERFLY OPTIMIZATION ALGORITHM

Mehdi Ghalambaz et al.

Summary: The butterfly optimization algorithm (BOA) is used to minimize energy consumption of an office building in Seattle by establishing two-way coupling with EnergyPluse to optimize design variables dynamically. It was found that using 50 butterflies could lead to the best optimization performance, and BOA with 15 butterflies or more could effectively avoid local minimums and reach the best minimum with reasonable computation effort when compared with other optimization methods.

THERMAL SCIENCE (2022)

添加到收藏夹

Article Thermodynamics

Feasibility and optimal operation of micro energy hybrid system (hydro/wind) in the rural valley region

Nesrine Kefif et al.

Summary: This study introduces a micro-hydro-wind hybrid system to meet the increasing global and local demand for electrical energy and improve the economic feasibility of off-grid renewable energy systems. The research shows that the hydro-wind hybrid system can satisfy the electric load demand in different areas, and the financial cost of the system is inversely proportional to the wind speed and flow rate.

INTERNATIONAL JOURNAL OF LOW-CARBON TECHNOLOGIES (2022)

添加到收藏夹

Article Thermodynamics

Economic and environmental assessment using emergy of a geothermal power plant

Mohammad Jalili et al.

Summary: Environmental and economic factors play vital roles in thermodynamic systems design, and exergoeconomic and exergoenvironmental analyses are utilized to assess energy production systems. By using the concept of emergy, this research aims to improve understanding of economic and environmental impacts. The application of emergy-based exergoeconomic and exergoenvironmental balances provides insights for a combined flash and binary geothermal system, showing the need for strategies to reduce destruction emergy.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Food Science & Technology

Walnut Fruit Processing Equipment: Academic Insights and Perspectives

Mingzheng Liu et al.

Summary: This paper discusses the deep processing of walnuts, focusing on the utilization of by-products and the impact of preliminary processing on the quality of final walnut products. By analyzing the steps and equipment requirements of walnut preliminary processing, suggestions are made to address existing bottlenecks and ensure high-quality walnut products.

FOOD ENGINEERING REVIEWS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effects of Physicochemical Properties of Different Base Oils on Friction Coefficient and Surface Roughness in MQL Milling AISI 1045

Qingan Yin et al.

Summary: Research found that palm oil showed the best lubrication effect among different vegetable oils, achieving the lowest milling force, friction coefficient, and surface roughness values, resulting in the smoothest workpiece surface. Analysis revealed that palm oil, with a high content of saturated fatty acids, high viscosity, and small contact angle, could form the strongest lubricating oil film at the tool-workpiece interface.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

Assessment of a high-performance geothermal-based multigeneration system for production of power, cooling, and hydrogen: Thermodynamic and exergoeconomic evaluation

Hossein Azariyan et al.

Summary: The novel multigeneration system utilizes geothermal energy, Kalina cycle, absorption refrigeration system, and electrolyzer to produce power, cooling, and hydrogen efficiently. The system has been evaluated thermodynamically and exergoeconomically, showing high efficiencies and the highest exergy destruction rate in condenser 1.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Thermodynamics

Building energy optimization using Grey Wolf Optimizer (GWO)

Mehdi Ghalambaz et al.

Summary: In this research, the Grey Wolf Optimizer (GWO) was utilized to minimize the energy consumption of an office building in Seattle, with optimal performance achieved using 40 wolves. Compared to other optimization algorithms, GWO efficiently led to excellent optimal solutions.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Predictive model of convective heat transfer coefficient in bone micro-grinding using nanofluid aerosol cooling

Min Yang et al.

Summary: The study investigates the convective heat transfer characteristics and measurement methods of nanofluid aerosol cooling, establishing a theoretical model for the convective heat transfer coefficient and proposing a new measurement device to validate the theoretical model.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Chemistry, Physical

Feasibility analysis and capability characterization of a novel hybrid flash-binary geothermal power plant and trigeneration system through a case study

Yan Cao et al.

Summary: This study explores the feasibility of a novel hybrid system utilizing geothermal energy to produce power, distilled water, and hydrogen, and achieves high energy efficiency through parametric study and optimization.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of working fluids in a novel geothermal-based integration of organic-flash and power/cooling generation cycles with hydrogen and freshwater production units

Yan Cao et al.

Summary: This study aims to design and evaluate a novel geothermal-driven multigeneration system using various environmentally friendly working fluids. The results show that R123/R1234ze(e) has the highest cooling, hydrogen, and freshwater production rates, as well as energy efficiency; while R600/R1234ze(e) exhibits the maximum power generation and exergy efficiency, and R600/R1234yf has the lowest unit exergy cost of products.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Experimental investigation of CuO/Sio2 hybrid nano-lubricant in R600a vapour compression refrigeration system

A. Senthilkumar et al.

Summary: Vapour compression refrigeration systems are commonly used worldwide and have been improved over time to increase the coefficient of performance. The introduction of new materials in lubricants is a major path to increasing the C.O.P of the system. In this project, Cuo/Sio2 nano-lubricants are used as a substitute for pure mineral oil in vapor compression refrigeration systems.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Experimental investigation of ZnO / Sio2 hybrid nano-lubricant in R600a vapour compression refrigeration system

A. Senthilkumar et al.

Summary: The study successfully achieved significant energy savings and performance improvements in the vapour compression refrigeration system using hybrid nanolubricants.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Energy & Fuels

Enhancing the energy efficiency of vapour compression refrigerator system using R600a with graphene nanolubricant

T. O. Babarinde et al.

ENERGY REPORTS (2020)

添加到收藏夹

Article Energy & Fuels

Energy performance evaluation of R600a/MWCNT-nanolubricant as a drop-in replacement for R134a in household refrigerator system

T. O. Babarinde et al.

ENERGY REPORTS (2020)

添加到收藏夹

Article Energy & Fuels

Application of Second-Law Analysis for the Environmental Control Unit at High Ambient Temperature

Ammar M. Bahman et al.

ENERGIES (2020)

添加到收藏夹

Article Chemistry, Physical

Hydrogen extraction from a new integrated trigeneration system working with zeotropic mixture, using waste heat of a marine diesel engine

Milad Feili et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Surface morphology assessment of CFRP transverse grinding using CNT nanofluid minimum quantity lubrication

Teng Gao et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Thermodynamics

Performance evaluation of a modified R290 dual-evaporator refrigeration cycle using two-phase ejector as expansion device

Yu Gao et al.

ENERGY (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

A new high-efficient cooling/power cogeneration system based on a double-flash geothermal power plant and a novel zeotropic bi-evaporator ejector refrigeration cycle

Milad Feili et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Thermal performance, parametric analysis, and multi-objective optimization of a direct-expansion solar-assisted heat pump water heater using NSGA-II and decision makings

Yan Cao et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Design and optimization of a novel dual-loop bi-evaporator ejection/compression refrigeration cycle

Hadi Ghaebi et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Thermodynamic and exergoeconomic analyses of a proton exchange membrane fuel cell (PEMFC) system and the feasibility evaluation of integrating with a proton exchange membrane electrolyzer (PEME)

Ata Chitsaz et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Proposal and assessment of a new geothermal-based multigeneration system for cooling, heating, power, and hydrogen production, using LNG cold energy recovery

Mohammad Ebadollahi et al.

RENEWABLE ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Energy and exergy analysis of cold and power production from the geothermal reservoir of Torre Alfina

Martina Leveni et al.

ENERGY (2019)

添加到收藏夹

Article Thermodynamics

A novel solar and geothermal-based trigeneration system for electricity generation, hydrogen production and cooling

Osamah Siddiqui et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Energy and exergy evaluation of a new bi-evaporator electricity/cooling cogeneration system fueled by biogas

Towhid Gholizadeh et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Thermodynamics

Thermodynamic investigation of a new combined cooling, heating, and power (CCHP) system driven by parabolic trough solar collectors (PTSCs): A case study

Maghsoud Abdollahi Haghghi et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Investigations of thermal performance of ejection refrigeration system driven by low grade heat

Jerzy Gagan et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Novel dual-loop bi-evaporator vapor compression refrigeration cycles for freezing and air-conditioning applications

Hadi Rostamzadeh et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Exergy analysis and optimization of a combined cooling and power system driven by geothermal energy for ice-making and hydrogen production

Liyan Cao et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Thermodynamics

Energetic and exergoeconomic assessment of a multi-generation energy system based on indirect use of geothermal energy

Ehsan Akrami et al.

ENERGY (2017)

添加到收藏夹

Article Energy & Fuels

Thermodynamic and economic investigation of geothermal powered absorption cooling system for buildings

Ceyhun Yilmaz

GEOTHERMICS (2017)

添加到收藏夹

Article Chemistry, Physical

Thermodynamic and thermoeconomic analyses of a geothermal energy based integrated system for hydrogen production

Yunus Emre Yuksel et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil

Benkai Li et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Article Thermodynamics

Experimental investigation of TiO2-, SiO2- and Al2O3-lubricants for a domestic refrigerator system using LPG as working fluid

Olayinka S. Ohunakin et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Energy and exergy analyses of a bi-evaporator compression/ejection refrigeration cycle

Lihong Geng et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental evaluation of cooling performance by friction coefficient and specific friction energy in nanofluid minimum quantity lubrication grinding with different types of vegetable oil

Yanbin Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils

Yaogang Wang et al.

JOURNAL OF CLEANER PRODUCTION (2016)

添加到收藏夹

Article Energy & Fuels

Theoretical analysis of a combined power and ejector refrigeration cycle using zeotropic mixture

Xingyang Yang et al.

APPLIED ENERGY (2015)

添加到收藏夹

Article Engineering, Manufacturing

Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding

Yanbin Zhang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)

添加到收藏夹

Article Thermodynamics

Exergy analysis of R1234yf and R1234ze as R134a replacements in a two evaporator vapour compression refrigeration system

Alptug Yataganbaba et al.

INTERNATIONAL JOURNAL OF REFRIGERATION (2015)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil

Yanbin Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2015)

添加到收藏夹

Article Energy & Fuels

Renewable-energy-based multigeneration systems

I. Dincer et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2012)

添加到收藏夹

Review Thermodynamics

Review of solid adsorption solar refrigerator I: an overview of the refrigeration cycle

EE Anyanwu

ENERGY CONVERSION AND MANAGEMENT (2003)

添加到收藏夹

Article Chemistry, Physical

Thin film electrocatalyst layer for unitized regenerative polymer electrolyte fuel cells

T Ioroi et al.

JOURNAL OF POWER SOURCES (2002)

添加到收藏夹

Article Computer Science, Artificial Intelligence

A fast and elitist multiobjective genetic algorithm: NSGA-II

K Deb et al.

IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.