☆ 4.7 Review

The nonhalides in perovskite solar cells

MATERIALS CHEMISTRY FRONTIERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Guanidinium-Pseudohalide Perovskite Interfaces Enable Surface Reconstruction of Colloidal Quantum Dots for Efficient and Stable Photovoltaics

Jonghee Yang et al.

Summary: This study achieves high-performance and stable CQDPVs by reconstructing the oxidized CQD surface with thiocyanate anions for better surface passivation and promoting the construction of epitaxial perovskite bridges within the CQD matrix using guanidinium cations. The photocurrents are over 30 mA cm(-2) with nearly 80% quantum efficiency at excitonic peaks, and stable operation is maintained under humid and ambient conditions, indicating interfacial recombination associated with band alignment governs both the CQDPV performance and stability.

ACS NANO (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Acetic Acid-Assisted Synergistic Modulation of Crystallization Kinetics and Inhibition of Sn2+ Oxidation in Tin-Based Perovskite Solar Cells

Yang Su et al.

Summary: This study introduces acetic acid as an additive to achieve high-quality preparation of tin-based perovskite films, effectively reducing defect density and lattice distortion, thus improving the efficiency of solar cells.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Vertically aligned two-dimensional halide perovskites for reliably operable artificial synapses

Seung Ju Kim et al.

Summary: Halide perovskites, in the vertically aligned form, demonstrate remarkable improvements in multilevel analog memristive characteristics, plasticity, and classification accuracy, attributed to the vertically well-aligned lead iodide octahedra as the ion transport channel, as confirmed by first-principles calculations.

MATERIALS TODAY (2022)

添加到收藏夹

Review Multidisciplinary Sciences

Toward stable lead halide perovskite solar cells: A knob on the A/X sites components

Shurong Wang et al.

Summary: This study summarizes and discusses the instability of hybrid lead halide perovskite solar cells (PSCs), and highlights the component regulation from A/X sites.

ISCIENCE (2022)

添加到收藏夹

Article Engineering, Environmental

Multifunctional potassium thiocyanate interlayer for eco-friendly tin perovskite indoor and outdoor photovoltaics

Jun-Jie Cao et al.

Summary: A bottom passivation strategy using potassium thiocyanate was developed to improve the photovoltaic performance of tin perovskite solar cells. The strategy showed multifunctional roles in aligning energy levels, assisting perovskite crystallization, and promoting charge transport, resulting in high power conversion efficiency. The outstanding indoor performance demonstrated the huge application potential of eco-friendly tin perovskites.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

High Open Circuit Voltage Over 1 V Achieved in Tin-Based Perovskite Solar Cells with a 2D/3D Vertical Heterojunction

Tianyue Wang et al.

Summary: Researchers have demonstrated a stacked quasi-2D-3D double-layered structure in perovskite films prepared using vacuum treatment. The introduction of guanidinium thiocyanate additive improves the crystallinity and carrier mobility, leading to high efficiency lead-free perovskite solar cells.

ADVANCED SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Pseudohalide-Assisted Growth of Oriented Large Grains for High-Performance and Stable2D Perovskite Solar Cells

Weichuan Zhang et al.

Summary: This study finds that pseudohalides can promote the growth of oriented large-grained 2D perovskite films, improve their phase distribution, crystalline quality, and carrier transport, resulting in significantly improved efficiency and thermal stability of perovskite solar cells.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Chemistry, Physical

Tin perovskite solar cells with >1,300 h of operational stability in N2 through a synergistic chemical engineering approach

Jesus Sanchez-Diaz et al.

Summary: A chemical engineering approach using Dipropylammonium iodide and sodium borohydride as additives is reported to effectively prevent the premature degradation of Sn-HPs. The method allows for obtaining high efficiency and enhanced stability, with 96% of the initial PCE maintained after 1300 hours in N-2.

JOULE (2022)

添加到收藏夹

Article Energy & Fuels

Superhalogen Passivation for Efficient and Stable Perovskite Solar Cells

Hobeom Kim et al.

Summary: Metal-halide perovskites are promising optoelectronic materials for solar cells. However, the presence of defects within perovskites can degrade their photovoltaic performance and stability. Halide engineering, including the use of superhalogens, is important to mitigate these issues and improve the materials quality of perovskites. This perspective provides an overview of research on using superhalogens to develop efficient and stable perovskite solar cells.

SOLAR RRL (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dual Effect of Superhalogen Ionic Liquids Ensures Efficient Carrier Transport for Highly Efficient and Stable Perovskite Solar Cells

Hui Zhang et al.

Summary: In this study, a dual-effect interface modification strategy using potassium tetrafluoroborate was reported to address the defect accumulation and nonradiative recombination issues at the interface of the electron-transport layer and the photosensitive layer in perovskite solar cells. The strategy successfully improved the device performance and stability by reducing hydroxyl group defects, enhancing electron mobility, and achieving better crystallinity.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

F-Type Pseudo-Halide Anions for High-Efficiency and Stable Wide-Band-Gap Inverted Perovskite Solar Cells with Fill Factor Exceeding 84%

Junlei Tao et al.

Summary: The use of F-type pseudo-halogen additives in wide-band-gap perovskite films improves grain size, crystal quality, and reduces defect density. The substitution of F-type pseudo-halogen anions for I-/Br- releases stress distortion and effectively suppresses carrier recombination, reduces charge transfer loss, and inhibits phase separation. These findings enhance the power conversion efficiency and stability of wide-band-gap perovskite solar cells.

ACS NANO (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Controllable Heterogenous Seeding-Induced Crystallization for High-Efficiency FAPbI3-Based Perovskite Solar Cells Over 24%

Hengkai Zhang et al.

Summary: A new strategy of heterogeneous seeding-induced crystallization (hetero-SiC) is proposed in this study to assist the growth of FAPbI(3)-based perovskite, which significantly improves film quality, reduces defects, and enhances stability under light illumination. The hetero-SiC process leads to outstanding performance in perovskite solar cells, with a power conversion efficiency of 24.0% and retention of 84% of initial performance after 1400 h of light illumination.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Suppressing the formation of tin vacancy yields efficient lead-free perovskite solar cells

Shurong Wang et al.

Nano Energy (2022)

添加到收藏夹

Article Chemistry, Physical

Phase-Pure γ-CsPbI3 for Efficient Inorganic Perovskite Solar Cells

Linrui Duan et al.

Summary: This study developed a FAAc-assisted strategy to prepare high-quality γ-CsPbI3 perovskite film and achieved high power conversion efficiency and good stability for the γ-CsPbI3 solar cells.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Energy & Fuels

Carrier control in Sn-Pb perovskites via 2D cation engineering for all-perovskite tandem solar cells with improved efficiency and stability

Jinhui Tong et al.

Summary: This study demonstrates that the addition of mixed bulky organic cations can improve the structural and optoelectronic properties of Sn-Pb perovskite thin films, resulting in high-efficiency single-junction and all-perovskite tandem solar cells with improved stability.

NATURE ENERGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Improving the Air Resistance of the Precursor Solution for Ambient-Air Coating of an Sn-Pb Perovskite Film with Superior Photovoltaic Performance

Shaoshen Lv et al.

Summary: This study reports the stabilization of Sn-Pb perovskite precursor solution using ionic liquid methylammonium acetate (MAAc) as the solvent, enabling the fabrication of Sn-Pb films in air. MAAc coordinates with the Sn-Pb precursor via hydrogen bonding, stabilizing the colloids and protecting Sn2+ stability. The Sn-Pb precursor solution based on MAAc solvent exhibits good durability and device stability.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Inhibiting the Growth of 1D Intermediates in Quasi-2D Ruddlesden-Popper Perovskites

Weichuan Zhang et al.

Summary: Introducing a GUASCN inhibitor can effectively inhibit the growth of intermediates and improve the power conversion efficiency of quasi-2D perovskite solar cells. The unencapsulated devices retain high efficiency under different conditions.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Versatile Molten-Salt Induction Strategy to Achieve Efficient CsPbI3 Perovskite Solar Cells with a High Open-Circuit Voltage >1.2 V

Yuqi Cui et al.

Summary: The use of DMAAc as a solvent and regulator enables efficient fabrication of CsPbI3 photovoltaic devices. This approach stabilizes the CsPbI3 structure, eliminates intermediate phases, and produces high-quality films. The resulting solar cells exhibit high power conversion efficiency and open-circuit voltage, setting a new record.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Ultra-small interlayer spacing and nano channels in anionic layered perovskite Cs2Pb(SCN)2I2enable efficient photoelectric conversion

Yiming Li et al.

Summary: The study demonstrates that Cs2Pb(SCN)(2)I(2) exhibits excellent photovoltaic and photodetection performance, including higher power conversion efficiency and photodetection characteristics, which present significant opportunities for its application in optoelectronic devices.

SCIENCE CHINA-MATERIALS (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Two-dimensional perovskites for photovoltaics

W. Fu et al.

Summary: This review discusses the key issues affecting the performance of 2D perovskites, highlighting the challenges and opportunities for 2D perovskite solar cells.

MATERIALS TODAY NANO (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synergistic Effects of Cation and Anion in an Ionic Imidazolium Tetrafluoroborate Additive for Improving the Efficiency and Stability of Half-Mixed Pb-Sn Perovskite Solar Cells

Hongki Kim et al.

Summary: Additive engineering using IMBF4 is proposed to enhance the optoelectronic performance of half-mixed Pb-Sn perovskites, leading to longer carrier lifetimes. The best-performing half-mixed Pb-Sn PSC demonstrates an efficiency above 19% with negligible hysteresis and a degradation lifetime to 80% of 53.5 hours under continuous illumination in a nitrogen-filled glovebox.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Ionic liquid reducing energy loss and stabilizing CsPbI2Br solar cells

Aili Wang et al.

Summary: The use of the ionic liquid BMIMBF4 can stabilize the CsPbI2Br phase and reduce surface defect density, leading to improvements in perovskite film quality and interfacial charge transport.

NANO ENERGY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Inch-sized high-quality perovskite single crystals by suppressing phase segregation for light-powered integrated circuits

Yucheng Liu et al.

Summary: An effective additive strategy was reported for growing high-quality 2-inch-sized FAMACs SCs, showing superior performance for potential applications in high-performance self-powered integrated circuit photodetectors.

SCIENCE ADVANCES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient (>20 %) and Stable All-Inorganic Cesium Lead Triiodide Solar Cell Enabled by Thiocyanate Molten Salts

Bingcheng Yu et al.

Summary: By developing a UAT molten salt modification strategy, high-quality CsPbI3 films have been successfully deposited with significantly improved crystal quality, leading to a cell efficiency of over 20% and excellent stability over 1000 hours. These results demonstrate a promising development route for CsPbI3-related photoelectric devices.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Physical

Pseudohalide Functional Additives in Tin Halide Perovskite for Efficient and Stable Pb-Free Perovskite Solar Cells

Dhruba B. Khadka et al.

Summary: The introduction of PEASCN as an additive in FASnI(3) perovskite film has proven to be effective in improving the stability and optoelectronic properties of Sn-based halide perovskite solar cells. This approach results in a compact, larger grain film with higher crystallinity and enhances device efficiency by suppressing tin oxidation and minimizing defects.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tetrafluoroborate-Induced Reduction in Defect Density in Hybrid Perovskites through Halide Management

Satyawan Nagane et al.

Summary: This study investigates the effect of introducing BF4- ions in the surface treatment of MAPbI(3) perovskite optoelectronic devices. The results show that BF4- reduces non-radiative charge-carrier recombination and increases photoluminescence quantum yield.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Superhalogen Boron Tetrafluoride Surface Modification Reduces the Formation of Organic Cation Vacancies on the Surface of Halide Perovskite Films

Anqi Yang et al.

Summary: Lead halide perovskite films used in solar cells are known to introduce defects during growth, with fluoride being able to passivate point defects. Introducing BF4 anions can effectively increase film stability by inhibiting the formation of point defects. This method provides a feasible way to prepare high-stability perovskite solar cells.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules

Tongle Bu et al.

Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.

SCIENCE (2021)

添加到收藏夹

Article Energy & Fuels

The critical role of composition-dependent intragrain planar defects in the performance of MA1-xFAxPbI3 perovskite solar cells

Wei Li et al.

Summary: The study shows that controlling intragrain defects can improve the performance of perovskite solar cells, and reducing the density of intragrain planar defects can enhance the device performance.

NATURE ENERGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Potassium Thiocyanate-Assisted Enhancement of Slot-Die-Coated Perovskite Films for High-Performance Solar Cells

Fuzong Xu et al.

Summary: This study improved the crystal size and quality of slot-die-coated MAPbI(3) perovskite films by adding potassium thiocyanate (KSCN), obtaining high-quality perovskite thin films. By utilizing these optimized properties, PSCs with high power conversion efficiencies were fabricated, demonstrating excellent performance.

SMALL SCIENCE (2021)

添加到收藏夹

Article Energy & Fuels

Two-dimensional Ruddlesden-Popper layered perovskite solar cells based on phase-pure thin films

Chao Liang et al.

Summary: Introducing molten salt spacers can produce phase-pure quantum wells and enhance the performance of solar cells. Two-dimensional Ruddlesden-Popper layered metal-halide perovskites have better stability and optoelectronic properties compared to their three-dimensional counterparts.

NATURE ENERGY (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Minimizing non-radiative recombination losses in perovskite solar cells

Deying Luo et al.

NATURE REVIEWS MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Boosting Photovoltaic Performance and Stability of Super-Halogen-Substituted Perovskite Solar Cells by Simultaneous Methylammonium Immobilization and Vacancy Compensation

Shendong Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Development of Hybrid Pseudohalide Tin Perovskites for Highly Stable Carbon-Electrode Solar Cells

Mohammad Rameez et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Applied

Improved perovskite solar cell efficiency by tuning the colloidal size and free ion concentration in precursor solution using formic acid additive

Lina Meng et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites

Daehan Kim et al.

SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superior Stability and Emission Quantum Yield (23% ± 3%) of Single-Layer 2D Tin Perovskite TEA2SnI4 via Thiocyanate Passivation

Jin-Tai Lin et al.

SMALL (2020)

添加到收藏夹

Article Chemistry, Physical

Highly Reproducible and Efficient FASnl3 Perovskite Solar Cells Fabricated with Volatilizable Reducing Solvent

Xiangyue Meng et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Core/Shell Perovskite Nanocrystals: Synthesis of Highly Efficient and Environmentally Stable FAPbBr3/CsPbBr3 for LED Applications

Chengxi Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

High-Performance Photovoltaic Materials Based on the Superlattice Structures of Organic-Inorganic Halide Perovskite and Superhalogen Hybrid Perovskite

Dong Li et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

A piperidinium salt stabilizes efficient metal-halide perovskite solar cells

Yen-Hung Lin et al.

SCIENCE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Vapor-assisted deposition of highly efficient, stable black-phase FAPbI3 perovskite solar cells

Haizhou Lu et al.

SCIENCE (2020)

添加到收藏夹

Article Energy & Fuels

Optimization of Bulk Defects in Sn/Pb Mixed Perovskite Solar Cells Through Synergistic Effect of Potassium Thiocyanate

Qin Chen et al.

SOLAR RRL (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Carrier lifetimes of >1 μs in Sn-Pb perovskites enable efficient all-perovskite tandem solar cells

Jinhui Tong et al.

SCIENCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Origin of enhanced stability in thiocyanate substituted -FAPbI3 analogues

Zhuo Xu et al.

SCIENCE CHINA-CHEMISTRY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Stable and Strong Emission CsPbBr3 Quantum Dots by Surface Engineering for High-Performance Optoelectronic Films

Chao Zheng et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Planar perovskite solar cells with long-term stability using ionic liquid additives

Sai Bai et al.

NATURE (2019)

添加到收藏夹

Article Chemistry, Applied

Pseudohalide induced tunable electronic and excitonic properties in two-dimensional single-layer perovskite for photovoltaics and photoelectronic applications

Zhuo Xu et al.

JOURNAL OF ENERGY CHEMISTRY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Efficient Sn/Pb Binary Perovskite Solar Cell via Precursor Engineering: A Two-Step Fabrication Process

Xiaomei Lian et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Double-slit photoelectron interference in strong-field ionization of the neon dimer

Maksim Kunitski et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Boosting Photovoltaic Performance for Lead Halide Perovskites Solar Cells with BF4- Anion Substitutions

Jie Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Pseudohalides in Lead-Based Perovskite Semiconductors

Bright Walker et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Efficient and stable CH3NH3PbI3-x(SCN)(x) planar perovskite solar cells fabricated in ambient air with low-temperature process

Zongbao Zhang et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Physical

Rod-shaped thiocyanate-induced abnormal band gap broadening in SCN- doped CsPbBr3 perovskite nanocrystals

Yongbing Lou et al.

NANO RESEARCH (2018)

添加到收藏夹

Article Chemistry, Physical

Interface Modification by Ionic Liquid: A Promising Candidate for Indoor Light Harvesting and Stability Improvement of Planar Perovskite Solar Cells

Meng Li et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Orientation Regulation of Phenylethylammonium Cation Based 2D Perovskite Solar Cell with Efficiency Higher Than 11%

Xinqian Zhang et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Review Multidisciplinary Sciences

Challenges for commercializing perovskite solar cells

Yaoguang Rong et al.

SCIENCE (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Thiocyanate Containing Two-Dimensional Cesium Lead Iodide Perovskite, Cs2PbI2(SCN)2: Characterization, Photovoltaic Application, and Degradation Mechanism

Youhei Numata et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Pseudohalide-Induced Recrystallization Engineering for CH3NH3PbI3 Film and Its Application in Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells

Hua Dong et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient Generation of Long-Lived Triplet Excitons in 2D Hybrid Perovskite

Robert Younts et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Impact of Postsynthetic Surface Modification on Photoluminescence Intermittency in Formamidinium Lead Bromide Perovskite Nanocrystals

Naoki Yarita et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Essentially Trap-Free CsPbBr3 Colloidal Nanocrystals by Postsynthetic Thiocyanate Surface Treatment

Brent A. Koscher et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

添加到收藏夹

Article Chemistry, Physical

Guanidinium thiocyanate selective Ostwald ripening induced large grain for high performance perovskite solar cells

Ngoc Duy Pham et al.

NANO ENERGY (2017)

添加到收藏夹

Article Chemistry, Physical

Synergistic Effects of Lead Thiocyanate Additive and Solvent Annealing on the Performance of Wide-Bandgap Perovskite Solar Cells

Yue Yu et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Unveiling the Influence of pH on the Crystallization of Hybrid Perovskites, Delivering Low Voltage Loss Photovoltaics

Nakita K. Noel et al.

JOULE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Pseudohalide-Exchanged Quantum Dot Solids Achieve Record Quantum Efficiency in Infrared Photovoltaics

Bin Sun et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Hole-Conductor-Free Fully Printable Mesoscopic Solar Cell with Mixed-Anion Perovskite CH3NH3PbI(3-x)(BF4)x

Jiangzhao Chen et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Lead-Free MA2CuClxBr4-x, Hybrid Perovskites

Daniele Cortecchia et al.

INORGANIC CHEMISTRY (2016)

添加到收藏夹

Article Chemistry, Physical

Ionic Liquid Control Crystal Growth to Enhance Planar Perovskite Solar Cells Efficiency

Ji-Youn Seo et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

Super-ion inspired colorful hybrid perovskite solar cells

Hong Fang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Chemistry, Physical

Direct Crystallization Route to Methylammonium Lead Iodide Perovskite from an Ionic Liquid

David T. Moore et al.

CHEMISTRY OF MATERIALS (2015)

添加到收藏夹

Article Chemistry, Physical

(CH3NH3)2Pb(SCN)2I2: A More Stable Structural Motif for Hybrid Halide Photovoltaics?

Alex M. Ganose et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

添加到收藏夹

Article Chemistry, Physical

Pseudohalide (SCN-)-Doped MAPbI3 Perovskites: A Few Surprises

Ansuman Halder et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

添加到收藏夹

Article Chemistry, Physical

CH3NH3PbI3 from non-iodide lead salts for perovskite solar cells via the formation of PbI2

Ganapathy Balaji et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

添加到收藏夹

Article Chemistry, Physical

Assessment of polyanion (BF4- and PF6-) substitutions in hybrid halide perovskites

Christopher H. Hendon et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

CH3NH3PbI(3-x)(BF4)x: molecular ion substituted hybrid perovskite

Satyawan Nagane et al.

CHEMICAL COMMUNICATIONS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Anomalous Band Gap Behavior in Mixed Sn and Pb Perovskites Enables Broadening of Absorption Spectrum in Solar Cells

Feng Hao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

添加到收藏夹

Article Optics

Lead-free solid-state organic-inorganic halide perovskite solar cells

Feng Hao et al.

NATURE PHOTONICS (2014)

添加到收藏夹

Review Optics

The emergence of perovskite solar cells

Martin A. Green et al.

NATURE PHOTONICS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Structure and properties of complex hydride perovskite materials

Pascal Schouwink et al.

NATURE COMMUNICATIONS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thiocyanate-Capped Nanocrystal Colloids: Vibrational Reporter of Surface Chemistry and Solution-Based Route to Enhanced Coupling in Nanocrystal Solids

Aaron T. Fafarman et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Molecular design of luminescent halogeno-thiocyano-d(10) metal complexes with in situ formation of the thiocyanate ligand

Xi Liu et al.

CRYSTENGCOMM (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cation-templated construction of three-dimensional alpha-Po cubic-type [M(dca)(3)](-) networks. Syntheses, structures and magnetic properties of A[M(dca)(3)] (dca = dicyanamide; for A = benzyltributylammonium, M = Mn2+, Co2+; for A = benzyltriethylammonium, M = Mn2+, Fe2+)

ML Tong et al.

NEW JOURNAL OF CHEMISTRY (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.