☆ 4.7 Article

Reduced Surface Hydroxyl and Released Interfacial Strain by Inserting CsF Anchor Interlayer for High-Performance Perovskite Solar Cells

SOLAR RRL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

CsI Enhanced Buried Interface for Efficient and UV-Robust Perovskite Solar Cells

Hang Xu et al.

Summary: By utilizing CsI-SnO2 complex as the buried interface for the electron transport layer, an effective strategy for enhancing the efficiency and stability of perovskite solar cells has been achieved. CsI modification facilitates perovskite film growth and defect passivation, while the gradient distribution of Cs+ contributes to suitable band alignment and enhanced resistance to UV exposure, resulting in significantly improved power conversion efficiency and UV stability for FAPbI(3)-based PSCs.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Molecularly Tailored SnO2/Perovskite Interface Enabling Efficient and Stable FAPbI3 Solar Cells

Yang Zhang et al.

Summary: This study demonstrates a strategy of molecularly tailoring the FAPbI(3)/SnO2 interface to enhance the stability of perovskite solar cells. By optimizing the configuration of C-O and C=O groups, the device achieved a champion power conversion efficiency of 23.5% and maintained good stability under continuous light illumination.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Microstructure, optical and magnetic properties of Zr-doped SnO synthesized by the hydrothermal method

Youchen Liu et al.

Summary: Sn1_xZrxO was successfully synthesized using a one-step hydrothermal method. The Zr concentration affects the lattice distortion of SnO and the morphology of the material. Sn1_xZrxO exhibits room temperature ferromagnetism and its optical properties are influenced by Zr doping.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Chemistry, Physical

Chlorobenzenesulfonic Potassium Salts as the Efficient Multifunctional Passivator for the Buried Interface in Regular Perovskite Solar Cells

Yao Dong et al.

Summary: This study presents a novel agent for modifying the interface properties of perovskite solar cells, resulting in improved efficiency and stability. The agent interacts with the surface of SnO2, filling oxygen vacancies and reducing defect density. The modified devices exhibit efficient charge extraction and transport, leading to high conversion efficiency and stability.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Elimination of Interfacial Lattice Mismatch and Detrimental Reaction by Self-Assembled Layer Dual-Passivation for Efficient and Stable Inverted Perovskite Solar Cells

Jiaqi Zhang et al.

Summary: In this study, the issues of interfacial lattice mismatch and adverse reaction in nickel oxide-based inverted perovskite solar cells are addressed by using a self-assembled small molecule CBSA, achieving high conversion efficiency and excellent stability.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Internal Encapsulation for Lead Halide Perovskite Films for Efficient and Very Stable Solar Cells

Yansong Ge et al.

Summary: This study presents an internal encapsulation strategy to improve the stability and efficiency of lead halide perovskite solar cells. By introducing NbCl5 and n-butylammonium bromide, vacancies are effectively passivated and channels for ion diffusion or migration are blocked, resulting in better homogeneity of the electron transport layer and improved energy level alignment at the interface. Moreover, the residual PbI2 is significantly reduced. The resulting solar cells demonstrate a high power conversion efficiency of 24.01% and excellent stability, retaining 88% of the initial efficiency after 1000 hours of testing.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Applied

Highly efficient flexible perovskite solar cells with vacuum-assisted low-temperature annealed SnO2 electron transport layer

Xiaoguo Li et al.

Summary: By utilizing a low-temperature vacuum-assisted annealing method with SnO2 ETL, this study achieved high efficiency and stability in flexible PSCs, making it a promising approach for large-scale commercialization.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Zwitterion-Functionalized SnO2 Substrate Induced Sequential Deposition of Black-Phase FAPbI3 with Rearranged PbI2 Residue

Zhixiao Qin et al.

Summary: The study introduces a method of using zwitterion-functionalized tin(IV) oxide as an electron-transport layer to induce the crystallization of high-quality black-phase FAPbI(3). The treated tin(IV) oxide rearranges residual lead iodide in the perovskite layer, reducing side effects and improving optoelectronic performance. The resulting perovskite solar cells show excellent power conversion efficiency and long-term stability.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

Asymmetric organic diammonium salt buried in SnO2 layer enables fast carrier transfer and interfacial defects passivation for efficient perovskite solar cells

Hongru Ma et al.

Summary: Reasonably passivating interfacial defects and reducing non-radiative recombination are effective strategies to improve the efficiency and stability of perovskite solar cells. In this study, the burying of a suitable ammonium salt in the electron transport layer was found to enhance the electron mobility, optimize the energy level arrangement, and improve the crystallinity of the perovskite layer. As a result, the power conversion efficiency of the solar cells was significantly improved, and their operational stability was enhanced.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Bifunctional Passivation through Fluoride Treatment for Highly Efficient and Stable Perovskite Solar Cells

Chang Liu et al.

Summary: In this study, fluoride is used as a passivation agent to reduce defects on both the TiO2 surface and the bottom surface of the perovskite layer, thereby improving the efficiency and stability of PSCs.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Rubidium Fluoride Modified SnO2 for Planar n-i-p Perovskite Solar Cells

Jing Zhuang et al.

Summary: Regulating the electron transport layer (ETL) using the cost-effective modification material rubidium fluoride (RbF) can enhance the electron mobility of SnO2 and suppress hysteresis in perovskite solar cells (PSCs). Double-sided passivated PSCs with RbF on the SnO2 surface and p-methoxyphenethylammonium iodide on the perovskite surface achieved an outstanding PCE result with a small V-oc deficit.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Situ Surface Fluorination of TiO2 Nanocrystals Reinforces Interface Binding of Perovskite Layer for Highly Efficient Solar Cells with Dramatically Enhanced Ultraviolet-Light Stability

Wanpei Hu et al.

Summary: By in situ fluorination, TiO2 nanocrystals can increase electron mobility, decrease trap state density, and inhibit photocatalytic activity; utilizing fluorinated TiO2 as ETL enables high efficiency and stability of perovskite solar cells.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Multifunctional Polymer Framework Modified SnO2 Enabling a Photostable α-FAPbI3 Perovskite Solar Cell with Efficiency Exceeding 23%

Zhenghong Xiong et al.

Summary: In this study, PEGDA was introduced into SnO2 dispersion to enhance the photovoltaic performance and stability of pero-SCs. The PEGDA-modified SnO2 acted as an ETL, improving carrier transport and matching energy levels with perovskite. Additionally, PEGDA passivated defects at the perovskite-ETL interface, leading to a high power conversion efficiency and long-term stability.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synergistic Effects of Eu-MOF on Perovskite Solar Cells with Improved Stability

Jie Dou et al.

Summary: The introduction of an ultrathin Eu-MOF layer in perovskite solar cells has been shown to enhance device stability and light utilization by reducing defect concentration, improving carrier transport, and utilizing the Forster resonance energy transfer effect. This leads to a champion power conversion efficiency of 22.16% and excellent device stability, with 96% of original PCE retained after 2000 hours under 30% relative humidity and 91% retained after 1200 hours at 85 degrees C in N-2 environment.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ferrocene-Induced Perpetual Recovery on All Elemental Defects in Perovskite Solar Cells

Qing Chang et al.

Summary: The researchers proposed a recovery agent, ferrocene, which can effectively repair various elemental defects in perovskite solar cells and achieve self-regeneration, allowing PSCs to have long-term stability in various extreme environments.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Engineering, Environmental

Interfacial defect passivation and stress release by multifunctional KPF6 modification for planar perovskite solar cells with enhanced efficiency and stability

Huan Bi et al.

Summary: This study presents a multifunctional interface modification strategy using KPF6 molecule to improve the interface contact and enhance the efficiency and stability of PSCs. The KPF6 modification leads to improved film quality, defect passivation, and stress release, resulting in a significant enhancement in efficiency and stability of the devices.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Perovskite Solar Cells with Front Surface Gradient

Mingxuan Guo et al.

Summary: The study investigated carrier distribution in halide perovskite solar cells and successfully achieved a gradient structure using perovskite quantum dots, effectively reducing surface recombination without compromising photocurrent. The performance of normal structured hybrid PSCs and MAPbI(3) cells was found to be good, with open-circuit voltages exceeding their respective Shockley-Queisser limits and power conversion efficiencies reaching up to 22.36% and 20.53%, respectively.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

π-Conjugated Small Molecules Modified SnO2 Layer for Perovskite Solar Cells with over 23% Efficiency

Qiang Lou et al.

Summary: This work presents a new type of SnO2 passivator, which improves the efficiency of perovskite solar cells by optimizing molecular stacking to enhance interfacial characteristics. The impressive power conversion efficiency over 23% achieved with this new passivator is among the highest reported values for triple-cation perovskite systems to date.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

CsPbBr3 Nanocrystal Induced Bilateral Interface Modification for Efficient Planar Perovskite Solar Cells

Jianjun Zhang et al.

Summary: By doping CsPbBr3 nanocrystals into perovskites, a bilateral interface modification was achieved which effectively suppressed defects and enhanced electron transport. The enhanced built-in electric field facilitated oriented migration of carriers within the perovskite, resulting in a power conversion efficiency exceeding 20% in the solar cells.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Amorphous TiO2 Coatings Stabilize Perovskite Solar Cells

Seongrok Seo et al.

Summary: Significant progress has been made in improving the power conversion efficiency of perovskite solar cells over the past decade, but long-term stability remains a challenge. By utilizing an interface-engineered stabilization approach with amorphous TiO2, ion migration in PSCs is prevented, leading to improved operational stability and increased device efficiency. The combination of Spiro-OMeTAD/a-TiO2 layers has shown unprecedented results in promoting device efficiency, with substantial improvement in operational stability compared to control PSCs.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Methylammonium Triiodide for Defect Engineering of High-Efficiency Perovskite Solar Cells

Essa A. Alharbi et al.

Summary: A simple strategy using MAI(3) as an additive has been developed to enhance the performance and stability of photovoltaic devices, with the champion device achieving a high power conversion efficiency and operational stability.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Modulation of perovskite crystallization processes towards highly efficient and stable perovskite solar cells with MXene quantum dot-modified SnO2

Yingguo Yang et al.

Summary: The study explores the modulation of perovskite crystallization kinetics by nanocrystalline SnO2 layers, showing that MQDs-SnO2 layer can rapidly induce perovskite nucleation and improve the crystal quality and phase stability. With superior charge extraction properties, the corresponding PSCs achieved up to 23.3% steady-state power conversion efficiency and outstanding stability against humidity and light soaking.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Multifunctional organic ammonium salt-modified SnO2 nanoparticles toward efficient and stable planar perovskite solar cells

Huan Bi et al.

Summary: The novel and effective multifunctional modification strategy through incorporating Girard's Reagent T (GRT) molecules can significantly reduce the bulk and interfacial nonradiative recombination losses in SnO2-based perovskite solar cells, leading to improved power conversion efficiency and stability.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Strain engineering and epitaxial stabilization of halide perovskites

Yimu Chen et al.

NATURE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Vertical Phase Separated Cesium Fluoride Doping Organic Electron Transport Layer: A Facile and Efficient Bridge Linked Heterojunction for Perovskite Solar Cells

Jianxing Xia et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Bifunctional Surface Engineering on SnO2 Reduces Energy Loss in Perovskite Solar Cells

Eui Hyuk Jung et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Multifunctional Polymer-Regulated SnO2Nanocrystals Enhance Interface Contact for Efficient and Stable Planar Perovskite Solar Cells

Shuai You et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

An in situ cross-linked 1D/3D perovskite heterostructure improves the stability of hybrid perovskite solar cells for over 3000 h operation

Ning Yang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Strain engineering in perovskite solar cells and its impacts on carrier dynamics

Cheng Zhu et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Chemistry, Physical

Alkali Chlorides for the Suppression of the Interfacial Recombination in Inverted Planar Perovskite Solar Cells

Wei Chen et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Energy & Fuels

Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells

Nengxu Li et al.

NATURE ENERGY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Simple Way to Simultaneously Release the Interface Stress and Realize the Inner Encapsulation for Highly Efficient and Stable Perovskite Solar Cells

Jionghua Wu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Physics, Applied

Effect of tantalum doping on SnO2 electron transport layer via low temperature process for perovskite solar cells

Qi Liu et al.

APPLIED PHYSICS LETTERS (2019)

添加到收藏夹

Article Chemistry, Physical

Spontaneous Interface Ion Exchange: Passivating Surface Defects of Perovskite Solar Cells with Enhanced Photovoltage

Zhipeng Li et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Incorporating CsF into the PbI2 Film for Stable Mixed Cation-Halide Perovskite Solar Cells

Xiaohui Yi et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability

Hao Wang et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Efficiency, Hysteresis-Less, UV-Stable Perovskite Solar Cells with Cascade ZnO-ZnS Electron Transport Layer

Ruihao Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

添加到收藏夹

Article Energy & Fuels

SnO2-Based Perovskite Solar Cells: Configuration Design and Performance Improvement

Detao Liu et al.

SOLAR RRL (2019)

添加到收藏夹

Article Multidisciplinary Sciences

High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2

Dong Yang et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Universal passivation strategy to slot-die printed SnO2 for hysteresis-free efficient flexible perovskite solar module

Tongle Bu et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Decomposition of Organometal Halide Perovskite Films on Zinc Oxide Nanoparticles

Yuanhang Cheng et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Low-Temperature Solution-Processed Tin Oxide as an Alternative Electron Transporting Layer for Efficient Perovskite Solar Cells

Weijun Ke et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Modified Two-Step Deposition Method for High-Efficiency TiO2/CH3NH3PbI3 Heterojunction Solar Cells

Jiangjian Shi et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solvent Annealing of Perovskite-Induced Crystal Growth for Photovoltaic-Device Efficiency Enhancement

Zhengguo Xiao et al.

ADVANCED MATERIALS (2014)

添加到收藏夹

Editorial Material Chemistry, Multidisciplinary

New Light on an Old Story: Perovskites Go Solar

Bettina V. Lotsch

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

添加到收藏夹

Article Chemistry, Physical

Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells

Nam Joong Jeon et al.

NATURE MATERIALS (2014)

添加到收藏夹

Article Chemistry, Physical

Organometal Perovskite Light Absorbers Toward a 20% Efficiency Low-Cost Solid-State Mesoscopic Solar Cell

Nam-Gyu Park

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)

添加到收藏夹

Article Multidisciplinary Sciences

Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber

Samuel D. Stranks et al.

SCIENCE (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mesoporous Anatase TiO2 Beads with High Surface Areas and Controllable Pore Sizes: A Superior Candidate for High-Performance Dye-Sensitized Solar Cells

Dehong Chen et al.

ADVANCED MATERIALS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

XPS study of the L-CVD deposited SnO2 thin films exposed to oxygen and hydrogen

J Szuber et al.

THIN SOLID FILMS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.