☆ 4.7 Article

Tailoring Self-Assembled Monolayers for High-Performance Polymer Solar Cells with Improved Stability

SOLAR RRL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Refilling strategy of crosslinked aromatic SAMs for enhancing the molecular packing density

M. Alsalama et al.

Summary: The stability and uniform coverage of molecular self-assembled monolayers (SAMs) on metal substrates is crucial for device integration. Electron irradiation-induced intermolecular crosslinking is one strategy to enhance the stability of SAMs. In this study, biphenyl-4-4-thiol molecules were densely packed into SAMs after electron radiation, and nitrogen atoms in 4'-Mercapto-[1,1'-biphenyl]-4-carbonitrile molecules were used as markers to estimate the reduction of SAM coverage area. The experimental results were supported by density functional theory calculations, and the findings can be important for creating stable molecular SAM devices using an alternating irradiation and refilling procedure.

APPLIED SURFACE SCIENCE (2023)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent progress in organic solar cells (Part I material science)

Yahui Liu et al.

Summary: In recent years, organic solar cells (OSCs) have made significant progress with power conversion efficiencies (PCEs) over 18%, showing promising practical applications. Key research focuses in the OSC field include development in material science and interface materials. The article systematically summarizes the recent progress in these areas and discusses current challenges and future developments.

SCIENCE CHINA-CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Tandem Organic Solar Cell with 20.2% Efficiency

Zhong Zheng et al.

Summary: A advanced interconnecting layer for tandem organic solar cell is developed in this study. By controlling the O-2 flux during evaporation, efficient electron extraction and low Schottky barrier are obtained, enabling effective charge recombination between two subcells. The tandem cell with the interconnecting layer shows a high efficiency of 20.27%.

JOULE (2022)

添加到收藏夹

Review Polymer Science

Self-assembled monolayers for interface engineering in polymer solar cells

Jie Hu et al.

Summary: Polymer solar cells (PSCs) have been developed extensively in the past decade due to their advantages of low cost, lightweight, mechanical flexibility, versatility of chemical design and synthesis, semitransparency, and solution processing. The performance and lifetime of PSCs depend on the properties of active materials and interfaces. Self-assembled monolayers (SAMs) of organic molecules can control the electronic and chemical properties at inorganic-organic interfaces. This review discusses the application of SAMs in PSCs at different interfaces and highlights their potential for improving the stability and performance of PSCs.

JOURNAL OF POLYMER SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology

Lei Zhu et al.

Summary: Morphological control of donor and acceptor domains is crucial for efficient organic photovoltaics, and this study demonstrates a double-fibril network strategy to achieve a high power conversion efficiency of 19.3%.

NATURE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Room temperature phosphorescence achieved by aromatic/perfluoroaromatic interactions

Qunhua Zhang et al.

Summary: This text explores the achievement of persistent room temperature phosphorescence (RTP) emission through aromatic/perfluoroaromatic interactions and discusses the effects of halogen substitutions and multiple fluorine substitutions on RTP lifetime and water resistance.

SCIENCE CHINA-CHEMISTRY (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent progress in organic solar cells (Part II device engineering)

Yahui Liu et al.

Summary: This review examines the rapid development of organic solar cells and highlights the importance of device engineering in achieving high power conversion efficiency. The challenges, problems, and future developments in this field are also discussed.

SCIENCE CHINA-CHEMISTRY (2022)

添加到收藏夹

Article Energy & Fuels

An alcohol-dispersed conducting polymer complex for fully printable organic solar cells with improved stability

Youyu Jiang et al.

Summary: Researchers have developed an alcohol-dispersed PEDOT formulation for efficient and stable organic solar cells. The formulation shows good wetting properties and low acidity, avoiding the drawbacks of aqueous PEDOT:PSS. Organic photovoltaics based on PEDOT:F achieved a power conversion efficiency of 15% and retained 83% of the initial efficiency after 1,330 hours of continuous illumination.

NATURE ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Desired open-circuit voltage increase enables efficiencies approaching 19% in symmetric-asymmetric molecule ternary organic photovoltaics

Lingling Zhan et al.

Summary: By constructing ternary organic photovoltaics, the open-circuit voltage (V-oc) loss is reduced, leading to a higher voltage without sacrificing the absorbing range. In addition, the ternary blend exhibits enhanced charge transport property and a higher fill factor.

JOULE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Binary Organic Solar Cells Breaking 19% via Manipulating the Vertical Component Distribution

Yanan Wei et al.

Summary: The variation of the vertical component distribution has a significant impact on the photovoltaic performance of organic solar cells. This study demonstrates that sequential deposition of materials can improve the efficiency of solar cells.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Multiphase Morphology with Enhanced Carrier Lifetime via Quaternary Strategy Enables High-Efficiency, Thick-Film, and Large-Area Organic Photovoltaics

Lingling Zhan et al.

Summary: The study demonstrates the potential of using a quaternary strategy to improve the efficiency and practical application of organic photovoltaic (OPV) devices. By optimizing the intermixing-phase size, thick-film and large-area devices are constructed, achieving a high power conversion efficiency (PCE).

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

18.9% Efficient Organic Solar Cells Based on n-Doped Bulk-Heterojunction and Halogen-Substituted Self-Assembled Monolayers as Hole Extracting Interlayers

Yuanbao Lin et al.

Summary: The influence of halogen substitutions on the energy levels of a self-assembled hole-extracting molecule and its performance in organic photovoltaic cells are investigated. It is found that Cl-2PACz-based cells exhibit the highest power conversion efficiency and enhanced stability.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Manipulating Charge Transfer and Transport via Intermediary Electron Acceptor Channels Enables 19.3% Efficiency Organic Photovoltaics

Lingling Zhan et al.

Summary: By adopting a ternary strategy to regulate the structure of symmetric-asymmetric non-fullerene acceptors, a balance between open-circuit voltage and short-circuit current density can be achieved in organic photovoltaics, leading to higher efficiency.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Manipulating the D:A interfacial energetics and intermolecular packing for 19.2% efficiency organic photovoltaics

Chengliang He et al.

Summary: Manipulating the donor:acceptor energetics is crucial for achieving balanced charge separation and recombination in organic solar cells (OSCs). In this study, a non-fullerene electron acceptor, BTP-H2, was designed and synthesized to pair with the polymer donor PM6, showing strong intermolecular interaction and near-zero highest occupied molecular orbital (HOMO) offset. The results demonstrated efficient charge separation and optimized energy conversion, leading to high-performance OSCs with a power conversion efficiency (PCE) of 18.5% and a peak photon-to-electron response of approximately 90%.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

18.4 % Organic Solar Cells Using a High Ionization Energy Self-Assembled Monolayer as Hole-Extraction Interlayer

Yuanbao Lin et al.

Summary: Self-assembled monolayers based on Br-2PACz, 2PACz, and MeO-2PACz were investigated as hole-extracting interlayers in organic photovoltaics. OPV cells using ITO/Br-2PACz anodes exhibited the highest power conversion efficiency due to the significantly higher work function of the ITO/Br-2PACz electrode, leading to improved hole transport and longer carrier lifetimes.

CHEMSUSCHEM (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cell with 19% Efficiency

Yong Cui et al.

Summary: By combining material design and ternary blending strategy, a maximum power conversion efficiency of 19.0% is achieved in single-junction OPV cells. Optimized active layer structure significantly improves the photovoltaic parameters, enhancing the performance and PCE values of the cells.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Organic

Arene-Perfluoroarene Interactions in Solution

Ga Young Lee et al.

Summary: A systematic study of arene-perfluoroarene interactions in solution reveals that factors such as fluorination, extension of pi systems, and enhancement of solvent polarity significantly influence the stability of stacking energy. Experimental results in aqueous solution show that electrostatic and dispersion interactions, as well as the hydrophobic effect, play key roles in the impressive binding energy observed.

JOURNAL OF ORGANIC CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-performance polymer solar cells with efficiency over 18% enabled by asymmetric side chain engineering of non-fullerene acceptors

Shihao Chen et al.

Summary: The research suggests that asymmetric side-chain engineering can effectively tune the properties of non-fullerene small-molecule acceptors (NFSMAs) and improve the power conversion efficiency for binary non-fullerene polymer solar cells (NFPSCs). Introducing proper asymmetric side chains in NFSMAs can induce favorable face-on molecule orientation, enhance carrier mobilities, balance charge transport, and reduce recombination losses, leading to improved overall performance in NFPSCs.

SCIENCE CHINA-CHEMISTRY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Burn-In Degradation Mechanism Identified for Small Molecular Acceptor-Based High-Efficiency Nonfullerene Organic Solar Cells

Leiping Duan et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Self-Assembled Monolayer Enables Hole Transport Layer-Free Organic Solar Cells with 18% Efficiency and Improved Operational Stability

Yuanbao Lin et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Energy & Fuels

Interface Modification Enabled by Atomic Layer Deposited Ultra-Thin Titanium Oxide for High-Efficiency and Semitransparent Organic Solar Cells

Leiping Duan et al.

SOLAR RRL (2020)

添加到收藏夹

Article Energy & Fuels

Finely Tuned Cores in Star-Shaped Zwitterionic Molecules for Interface Engineering of High-Performance Polymer Solar Cells

Wenyan Yang et al.

SOLAR RRL (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Triple Dipole Effect from Self-Assembled Small-Molecules for High Performance Organic Photovoltaics

Liqiang Huang et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nafion-Modified MoOx as Effective Room-Temperature Hole Injection Layer for Stable, High-Performance Inverted Organic Solar Cells

Weiming Qiu et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Chemistry, Physical

Surface Modification of ZnO(0001)-Zn with Phosphonate-Based Self-Assembled Monolayers: Binding Modes, Orientation, and Work Function

Melanie Timpel et al.

CHEMISTRY OF MATERIALS (2014)

添加到收藏夹

Article Chemistry, Physical

ITO Interface Modifiers Can Improve VOC in Polymer Solar Cells and Suppress Surface Recombination

Kristina M. Knesting et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)

添加到收藏夹

Article Polymer Science

Second-order nonlinear optical (NLO) polymers containing perfluoroaromatic rings as isolation groups with Ar/ArF self-assembly effect: Enhanced NLO coefficient and stability

Wenbo Wu et al.

POLYMER (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells

Hin-Lap Yip et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Increased efficiency in small molecule organic photovoltaic cells through electrode modification with self-assembled monolayers

N. Beaumont et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interface Engineering for Organic Electronics

Hong Ma et al.

ADVANCED FUNCTIONAL MATERIALS (2010)

添加到收藏夹

Review Chemistry, Multidisciplinary

Water/alcohol soluble conjugated polymers as highly efficient electron transporting/injection layer in optoelectronic devices

Fei Huang et al.

CHEMICAL SOCIETY REVIEWS (2010)

添加到收藏夹

Article Chemistry, Multidisciplinary

Modification of the Surface Properties of Indium Tin Oxide with Benzylphosphonic Acids: A Joint Experimental and Theoretical Study

Peter J. Hotchkiss et al.

ADVANCED MATERIALS (2009)

添加到收藏夹

Article Chemistry, Physical

Theoretical Characterization of the Indium Tin Oxide Surface and of Its Binding Sites for Adsorption of Phosphonic Acid Monolayers

Pavel B. Paramonov et al.

CHEMISTRY OF MATERIALS (2008)

添加到收藏夹

Article Chemistry, Multidisciplinary

Study of the packing density and molecular orientation of bimolecular self-assembled monolayers of aromatic and aliphatic organosilanes on silica

Matthew B. Smith et al.

LANGMUIR (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Surface states, surface potentials, and segregation at surfaces of tin-doped In2O3

Y. Gassenbauer et al.

PHYSICAL REVIEW B (2006)

添加到收藏夹

Article Chemistry, Physical

Intermolecular interaction between hexafluorobenzene and benzene: Ab initio calculations including CCSD(T) level electron correlation correction

S Tsuzuki et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2006)

添加到收藏夹

Article Physics, Applied

Fine tuning work function of indium tin oxide by surface molecular design: Enhanced hole injection in organic electroluminescent devices

C Ganzorig et al.

APPLIED PHYSICS LETTERS (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.