4.8 Article

Mortise-tenon joints reinforced Janus composite solid-state electrolyte with fast kinetics for high-voltage lithium metal battery

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes

Laidong Zhou et al.

Summary: A series of new lithium mixed-metal chlorospinels are reported as solid electrolytes for all-solid-state lithium batteries, which exhibit high ionic conductivity and low electronic conductivity, showing potential for high-performance all-solid-state lithium batteries.

NATURE ENERGY (2022)

Article Chemistry, Physical

Solid polymer electrolyte with in-situ generated fast Li+ conducting network enable high voltage and dendrite-free lithium metal battery

Meng Yao et al.

Summary: This study presents a solid polymer electrolyte (SPE) with a fast Li+ conducting network, enhancing thermal stability and performance of solid lithium metal batteries (SLMBs). The SPE showed promising ionic conductivity and Young's modulus, leading to stable cycling performance in wide temperature ranges and high energy density for practical applications. The design strategy provides a dynamic approach for fabricating SPEs with wide-temperature applicability and high energy density SLMBs.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Physical

An ultrathin solid-state electrolyte film coated on LiNi0.8Co0.1Mn0.1O2 electrode surface for enhanced performance of lithium-ion batteries

Si-Yu Yang et al.

Summary: Coating a nano-scaled layer of LiPON on the electrode surface can improve the electrochemical stability and increase the cycle life and safety of lithium-ion batteries. The study shows that the coating not only modifies the electrode-electrolyte interface but also enhances the structural stability of the particle surface.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Multidisciplinary

A Morphologically Stable Li/Electrolyte Interface for All-Solid-State Batteries Enabled by 3D-Micropatterned Garnet

Rong Xu et al.

Summary: The use of a novel 3D-micropatterned solid-state electrolyte can stabilize the morphology of the Li/SSE interface even under high current density and limited stack pressure, preventing interface degradation.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Nanocomposite with fast Li+ conducting percolation network: Solid polymer electrolyte with Li+ non-conducting filler

Xin Ao et al.

Summary: A new strategy of constructing a Li+ fast conducting network using CeO2 nanowires in composite solid polymer electrolytes has been proposed, significantly improving the ionic conductivity and demonstrating excellent cycling performance in Li batteries.

NANO ENERGY (2021)

Review Chemistry, Multidisciplinary

Solid Polymer Electrolytes with High Conductivity and Transference Number of Li Ions for Li-Based Rechargeable Batteries

Yun Zhao et al.

Summary: This paper discusses the challenges faced by solid polymer electrolytes in improving lithium ion conductivity and lithium ion transference number, as well as their potential applications in high-energy density, safe, and flexible batteries.

ADVANCED SCIENCE (2021)

Article Chemistry, Physical

A high-performance, solution-processable polymer/ceramic/ionic liquid electrolyte for room temperature solid-state Li metal batteries

Xiujing Lin et al.

Summary: All-solid-state electrolytes provide a guarantee for the safe operation of Li metal batteries with high energy density, but face challenges of low ionic conductivity and huge interfacial impedance with lithium anodes. The introduction of ionic liquids is expected to solve these issues, as shown in this study where an in situ LiF-rich solid-electrolyte interface on the lithium anode was triggered by the reductive decomposition of IL and Li1.5Al0.5Ge1.5(PO4)3-involved electrolyte, leading to stable Li plating/stripping behavior and high performance in solid-state LMBs.

NANO ENERGY (2021)

Article Chemistry, Physical

Solid electrolytes reinforced by infinite coordination polymer nano-network for dendrite-free lithium metal batteries

Xiaoxue Wu et al.

Summary: Introducing Ce-coordinate ellagic acid nano-network into PEO matrix improves the performance of composite solid polymer electrolytes, achieving high conductivity and stability, ultimately enhancing the performance of lithium metal batteries.

ENERGY STORAGE MATERIALS (2021)

Article Nanoscience & Nanotechnology

High-Voltage and Wide-Temperature Lithium Metal Batteries Enabled by Ultrathin MOF-Derived Solid Polymer Electrolytes with Modulated Ion Transport

Meng Yao et al.

Summary: Solid polymer electrolytes with good ionic conductivity and stability are promising candidates for solid lithium metal batteries. The incorporation of metal-organic frameworks can effectively promote the dissociation of Li salt. Optimized SLMBs exhibit excellent cycling performance and safety even at high temperatures.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

High Energy Density Solid State Lithium Metal Batteries Enabled by Sub-5 μm Solid Polymer Electrolytes

Fei He et al.

Summary: Solid-state batteries (SSBs) are favored for their ability to address safety concerns and ensure high energy density. This study introduces an ultrathin bilayer solid-state electrolyte to enhance the safety and performance of SSBs, achieving high energy density goals.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Comprehensive Insights into Electrolytes and Solid Electrolyte Interfaces in Potassium-Ion Batteries

Xiao Zhang et al.

Summary: Potassium-ion batteries offer competitive alternatives to lithium-ion batteries due to abundant resources and high energy density. The electrolyte plays a crucial role in influencing the battery performance, but research on electrolytes in KIBs is still in its early stages. This review summarizes recent progress on K+ containing electrolytes and discusses the effects of salts, solvents, additives, and concentrations on electrolyte properties.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Significant Reduction in Interface Resistance and Super-Enhanced Performance of Lithium-Metal Battery by In Situ Construction of Poly(vinylidene fluoride)-Based Solid-State Membrane with Dual Ceramic Fillers

Sajid Hussain Siyal et al.

Summary: The use of LATP, LLTO, and PVDF electrolyte with lithium salt in the DSPE membrane shows promising results in enhancing battery safety and addressing interface resistance issues. The DSPE membrane exhibits excellent electrochemical performance, improved Li-transference numbers, and enhanced stability, effectively resisting Li dendrite growth.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Ultralong cycling and wide temperature range of lithium metal batteries enabled by solid polymer electrolytes interpenetrated with a poly(liquid crystal) network

Meng Yao et al.

Summary: Novel solid polymer electrolytes (SPEs) with enhanced Li+ ion migration exhibit outstanding ionic conductivity and electrochemical stability, making them suitable for next-generation solid lithium metal batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Physical

A composite solid electrolyte with an asymmetric ceramic framework for dendrite-free all-solid-state Li metal batteries†

Yanke Lin et al.

Summary: A novel CSE with an asymmetric dual-layer Li1.3Al0.3Ti1.7(PO4)3 ceramic framework was developed, showing high ionic conductivity and dendrite suppression capability for stable Li metal anode and high capacity all-solid-state Li metal batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

New Concepts in Electrolytes

Matthew Li et al.

CHEMICAL REVIEWS (2020)

Article Chemistry, Physical

Li Coordination of a Novel Asymmetric Anion in Ionic Liquid-in-Li Salt Electrolytes

Pinchas Nuernberg et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2020)

Article Nanoscience & Nanotechnology

LiFSI and LiDFBOP Dual-Salt Electrolyte Reinforces the Solid Electrolyte Interphase on a Lithium Metal Anode

Si Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Multidisciplinary

Recent advances in anodic interface engineering for solid-state lithium-metal batteries

Changzhi Sun et al.

MATERIALS HORIZONS (2020)

Article Chemistry, Multidisciplinary

Nitriding-Interface-Regulated Lithium Plating Enables Flame-Retardant Electrolytes for High-Voltage Lithium Metal Batteries

Shuang-Jie Tan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Multidisciplinary

Intermolecular Chemistry in Solid Polymer Electrolytes for High-Energy-Density Lithium Batteries

Qian Zhou et al.

ADVANCED MATERIALS (2019)

Article Multidisciplinary Sciences

Fluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries

Liumin Suo et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)

Article Chemistry, Physical

Polymer lithium-garnet interphase for an all-solid-state rechargeable battery

Weidong Zhou et al.

NANO ENERGY (2018)

Article Chemistry, Physical

Thermal Behavior of Ionic Liquids Containing the FSI Anion and the Li+ Cation

Junhua Huang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)