☆ 4.8 Article

In-situ constructing ceramer electrolytes with robust-flexible interfaces enabling long-cycling lithium metal batteries

ENERGY STORAGE MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Constructing a highly efficient solid-polymer-solid elastic ion transport network in cathodes activates the room temperature performance of all-solid-state lithium batteries

Jiabin Ma et al.

Summary: The poor performance of all-solid-state lithium batteries at room temperature is a critical challenge. This study reveals the underestimated transport efficiency of lithium ions in the cathode and proposes the construction of efficient solid-polymer-solid elastic lithium-ion transport channels to improve battery performance.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interphase control for high performance lithium metal batteries using ether aided ionic liquid electrolyte

Urbi Pal et al.

Summary: Future rechargeable Li metal batteries require a rational electrolyte design to improve cycling performance. This study reports an ether-ionic liquid electrolyte with excellent Li metal deposition, high voltage stability, and non-flammability. Experimental results demonstrate high-performance cycling with high coulombic efficiency even at high practical areal capacity.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Gravity-driven Poly(ethylene glycol)@Li1.5Al0.5Ge1.5(PO4)3 asymmetric solid polymer electrolytes for all-solid-state lithium batteries

Shujiao Yang et al.

Summary: An asymmetric solid polymer electrolyte was designed to improve battery performance, with excellent cycle life and capacity retention, demonstrating a promising electrolyte design strategy for all-solid-state batteries.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Elastomeric electrolytes for high-energy solid-state lithium batteries

Michael J. Lee et al.

Summary: Elastomeric solid-state electrolytes with mechanical robustness, high ionic conductivity, low interfacial resistance and high lithium-ion transference number enable stable operation of high-energy, solid-state lithium batteries.

NATURE (2022)

添加到收藏夹

Article Chemistry, Physical

Hydrogen bonding enhanced SiO2/PEO composite electrolytes for solid-state lithium batteries

Cheng Wang et al.

Summary: The researchers designed hydrogen-bonded polyethylene oxide composite solid electrolytes that can enhance both the ionic conductivity and mechanical strength through the formation of an interconnected network. By adjusting the composition ratio, they overcame the issues of poor film forming and low mechanical strength.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

添加到收藏夹

Article Chemistry, Physical

Integrated design of ultrathin crosslinked network polymer electrolytes for flexible and stable all-solid-state lithium batteries

Shujing Wen et al.

Summary: In this study, a novel ultrathin crosslinked solid polymer electrolyte (SPE) with high ion conductivities, mechanical strength, and fast interfacial charge transport was reported for flexible all-solid-state lithium batteries (ASSLBs). The SPE was synthesized by one-step in-situ crosslinked polymerization, forming a three-dimensional crosslinked polymer network that enhanced ionic conductivity and oxidation stability in the composite SPE.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Van der Waals Heteroepitaxy of Air-Stable Quasi-Free-Standing Silicene Layers on CVD Epitaxial Graphene/6H-SiC

Zouhour Ben Jabra et al.

Summary: This study investigates the growth of silicon on a chemically vapor deposited epitaxial graphene substrate and shows that the control of almost defect-free graphene is crucial for the growth of silicene. It is found that large silicene sheets can be formed at low coverages, while dendritic islands of silicon appear at higher coverages.

ACS NANO (2022)

添加到收藏夹

Article Chemistry, Analytical

Multifunctional gel polymer electrolyte suppressing lithium dendrites and stabling cathodes by asymmetric structural design

Yanyan Zhu et al.

Summary: In this study, an asymmetric bilayer composite gel polymer electrolyte (GPE) was designed and prepared to improve the performance of lithium batteries. The results demonstrated that the bilayer GPE can suppress lithium dendrites, stabilize the cathode electrolyte interface, improve the ionic conductivity, and enhance the cycling stability and rate performance of lithium batteries.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Nonflammable quasi-solid electrolyte for energy-dense and long-cycling lithium metal batteries with high-voltage Ni-rich layered cathodes

Zhuo Li et al.

Summary: A nonflammable quasi-solid electrolyte with high conductivity and wide electrochemical window is prepared. The electrolyte can capture solvents to form a protective layer on electrodes, suppressing side reactions and electrode dissolution.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Low-cost fumed silicon dioxide uniform Li+ flux for lean-electrolyte and anode-free Li/S battery

Yaqi Liao et al.

Summary: In this study, fumed SiO2 was proposed as an electrolyte additive to achieve uniform deposition of Li+ on the lithium metal anode. The SiO2 particles act as a pump and provide an additional pathway for Li+ transport, resulting in a homogeneous Li+ flux. Additionally, SiO2 can also improve the SEI formation and smooth the deposited Li, leading to significantly improved rechargeability and capacity of Li metal batteries.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Highly Elastic and Polar Block Polymer Binder Enabling Accommodation of Volume Change and Confinement of Polysulfide for High-Performance Lithium-Sulfur Batteries

Dongli Chen et al.

Summary: Lithium polysulfide (LiPS) shuttling and sulfur volume change have been addressed by using a highly elastic and polar block polymer binder. The binder can accommodate sulfur volume change, confine LiPSs, and improve the stability and performance of lithium-sulfur batteries.

ACS APPLIED ENERGY MATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

Fire-extinguishing, recyclable liquefied gas electrolytes for temperature-resilient lithium-metal batteries

Yijie Yin et al.

Summary: This study demonstrates a safe liquefied gas electrolyte for lithium-metal batteries based on the composition of clean fire-extinguishing agents. The electrolyte exhibits high ionic conductivity and temperature resilience, enabling stable cycling of the batteries under extreme temperatures. Additionally, a solvent-recycling process based on vapor pressure difference is proposed for sustainable operation.

NATURE ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Constructing 3D Li+-percolated transport network in composite polymer electrolytes for rechargeable quasi-solid-state lithium batteries

Yingmin Jin et al.

Summary: The rational design of a unique solid electrolyte structure improves the ion conductivity and enhances the cycling performance and voltage endurance of batteries, resulting in excellent performance of lithium batteries.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Constructing flame-retardant gel polymer electrolytes via multiscale free radical annihilating agents for Ni-rich lithium batteries

Tao Zhu et al.

Summary: By introducing hexachlorocyclotriphosphazene cross-linked tannic acid microsphere (HT) as a free radical annihilating agent, the parasitic multiscale free radical reactions in electrolytes can be effectively eliminated, leading to improved electrochemical stability and battery performance. This strategy is effective in different types of batteries and also enhances fire safety and mechanical abuse resistance. Therefore, this method has significant practical application value.

ENERGY STORAGE MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Advanced gel polymer electrolytes for safe and durable lithium metal batteries: Challenges, strategies, and perspectives

Wenhao Ren et al.

Summary: Lithium metal batteries (LMBs) are gaining attention for their high energy density, but safety concerns and performance degradation have hindered their practical use. Gel polymer electrolytes (GPEs) are seen as a promising alternative to liquid electrolytes, with advancements in design and fabrication enabling the development of safe and durable LMBs. This review highlights the progress in GPEs with specific functionalities and outlines future directions and challenges for large-scale production and application in new energy storage systems.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

An in-situ formed stable interface layer for high-performance sodium metal anode in a non-flammable electrolyte

Ming Zhu et al.

Summary: By using a non-flammable electrolyte, a stable solid-electrolyte-interface (SEI) layer was successfully generated in situ, effectively suppressing side reactions and dendrite growth in sodium metal batteries. The addition of DTD promoted the stability of the SEI layer, allowing for dendrite-free sodium plating/stripping with high coulombic efficiency and long-term stability in Na symmetric cells.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Correction Chemistry, Physical

Natural relief for lithium dendrites: Tailoring protein configurations for long-life lithium metal anodes (vol 42, pg 22, 2021)

Xuewei Fu et al.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Recent progress in thin separators for upgraded lithium ion batteries

Shijie Zhong et al.

Summary: Traditional lithium-based batteries often use separators with a thickness between 20-25 μm, striking a balance between safety and performance. However, thicker separators limit the space for active materials, hindering the development of high energy density batteries. Thin separators offer a solution by providing mechanical strength and reliability.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

An advanced solid polymer electrolyte composed of poly(propylene carbonate) and mesoporous silica nanoparticles for use in all-solid-state lithium-ion batteries

Pravin N. Didwal et al.

Summary: CSPEs are potential materials to replace hazardous organic liquid electrolytes in LIBs, as they are easy to process and allow better interfacial contact. However, their poor mechanical strength, low ionic conductivity, and limited cycling stability hinder their practical applications. By utilizing PPC as the host matrix and highly mesoporous silica nanoparticles (MSNs) as the filler, a cost-effective, flexible, and stable CSPE was developed with enhanced physico-electrochemical properties. The interaction of Li+ with PPC and MSNs contributes to the excellent performance of the CSPE, opening up new possibilities for solid-state battery fabrication and engineering.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

In Situ Gel Polymer Electrolyte with Inhibited Lithium Dendrite Growth and Enhanced Interfacial Stability for Lithium-Metal Batteries

Junqiang Wei et al.

Summary: The development of an ether-based gel polymer electrolyte (GPE-H) has addressed the challenges associated with the practical application of lithium-metal anodes in high-energy-density rechargeable lithium batteries, offering high ionic conductivity and electrochemical stability.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-conductivity 1T-MoS2 catalysts anchored on a carbon fiber cloth for high-performance lithium-sulfur batteries

Dongli Chen et al.

Summary: A functional composite interlayer consisting of metallic 1T-MoS2 and carbon fiber cloth was designed and fabricated to improve the performance of Li-S batteries by acting as an upper current collector and suppressing the shuttle effect of polysulfides through strong chemical interaction.

MATERIALS CHEMISTRY FRONTIERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Surface-reconstructed formation of hierarchical TiO2 mesoporous nanosheets with fast lithium-storage capability

Yuan Liu et al.

Summary: The study presents a top-down method for the simple synthesis of surface-engineered TiO2 nanosheets with a large surface area, open pores, and heterointerfaces. These materials show fast lithium uptake/release properties as lithium-storage electrodes, with high specific capacity and long-term cycling stability. The research paves the way for designing novel 2D nanostructures with a surface hierarchical structure for high-power energy-storage applications.

MATERIALS CHEMISTRY FRONTIERS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strong Lewis Acid-Base and Weak Hydrogen Bond Synergistically Enhancing Ionic Conductivity of Poly(ethylene oxide)@SiO2 Electrolytes for a High Rate Capability Li-Metal Battery

Zhong Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Nano-shield Design for Separators to Resist Dendrite Formation in Lithium-Metal Batteries

Jie Liang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Article Chemistry, Physical

Upgrading Traditional Organic Electrolytes toward Future Lithium Metal Batteries: A Hierarchical Nano-SiO2-Supported Gel Polymer Electrolyte

Pu Yang et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

Bifunctional composite separator with a solid-state-battery strategy for dendrite-free lithium metal batteries

Hanyu Huo et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Stable cycling of Li-S batteries by simultaneously suppressing Li-dendrite growth and polysulfide shuttling enabled by a bioinspired separator

Yanfei Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Low-Cost Self-Assembled Oxide Separator for Rechargeable Batteries

Nicholas S. Grundish et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Review Chemistry, Physical

Biomaterials for High-Energy Lithium-Based Batteries: Strategies, Challenges, and Perspectives

Xuewei Fu et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Engineering, Chemical

Multifunctional polymer electrolyte improving stability of electrode-electrolyte interface in lithium metal battery under high voltage

Ming Zhu et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

添加到收藏夹

Review Chemistry, Applied

Recent advances in gel polymer electrolyte for high-performance lithium batteries

Ming Zhu et al.

JOURNAL OF ENERGY CHEMISTRY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Silica-Aerogel-Reinforced Composite Polymer Electrolyte with High Ionic Conductivity and High Modulus

Dingchang Lin et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Electrode-electrolyte interfaces in lithium-based batteries

Xingwen Yu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

A Biobased Composite Gel Polymer Electrolyte with Functions of Lithium Dendrites Suppressing and Manganese Ions Trapping

Ming Zhu et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Electrochemistry

Thermo and electrochemical-stable composite gel polymer electrolytes derived from core-shell silica nanoparticles and ionic liquid for rechargeable lithium metal batteries

Qingpeng Guo et al.

ELECTROCHIMICA ACTA (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Upgrading traditional liquid electrolyte via in situ gelation for future lithium metal batteries

Feng-Quan Liu et al.

SCIENCE ADVANCES (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Stable Lithium Deposition Generated from Ceramic-Cross-Linked Gel Polymer Electrolytes for Lithium Anode

Chih-Hao Tsao et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Chemistry, Physical

SiO2 Hollow Nanosphere-Based Composite Solid Electrolyte for Lithium Metal Batteries to Suppress Lithium Dendrite Growth and Enhance Cycle Life

Dong Zhou et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Review Polymer Science

Structural engineering of polyurethane coatings for high performance applications

D. K. Chattopadhyay et al.

PROGRESS IN POLYMER SCIENCE (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.