4.6 Article

Recent advancements in thermoelectric generators for smart textile application

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Ceramics

A thermoelectric generator comprising selenium-doped bismuth telluride on flexible carbon cloth with n-type thermoelectric properties

Minsu Kim et al.

Summary: Carbon cloth was used as a flexible substrate to synthesize bismuth telluride particles with added selenium for improved thermoelectric performance. The maximum power factor reached 1300 mu W/mK(2) for the 30% Se-doped sample, demonstrating the potential of carbon cloth substrate for low temperature range applications.

CERAMICS INTERNATIONAL (2022)

Article Materials Science, Multidisciplinary

Solvent treatment of wet-spinning PEDOT:PSS fiber towards wearable thermoelectric energy harvesting

Yicheng Pan et al.

Summary: This study improved the conductivity of PEDOT:PSS fibers by treating them with different solvents, achieving a power factor of 9.42 mu Wm-1 K-2 and assembling a TE device with an output voltage of 1.7 mV.

SYNTHETIC METALS (2022)

Article Chemistry, Physical

Kirigami-Based Stretchable, Deformable, Ultralight Thin-Film Thermoelectric Generator for BodyNET Application

Zhanpeng Guo et al.

Summary: This research introduces an innovative design concept of constructing stretchable, deformable, ultralight 3D thin-film thermoelectric generators using kirigami techniques. High-performance inorganic thermoelectric films are introduced without property degradation, leading to the highest open voltage density and maximum power density achieved in the TEG.

ADVANCED ENERGY MATERIALS (2022)

Article Chemistry, Physical

Highly Integrated, Wearable Carbon-Nanotube-Yarn-Based Thermoelectric Generators Achieved by Selective Inkjet-Printed Chemical Doping

Kyung Tae Park et al.

Summary: Flexible thermoelectric materials are essential for self-powered wearable electronics, but their practical applications are hindered by low performance. This study proposes a highly aligned carbon-nanotube yarns (CNTYs) with selective doping via inkjet printing, achieving ultrahigh power factors for p- and n-type thermoelectric materials. The highly integrated, flexible CNTY-based thermoelectric generator (TEG) can generate unprecedented milliwatt-scale power using body heat alone, surpassing previously reported flexible material-based TEGs.

ADVANCED ENERGY MATERIALS (2022)

Article Chemistry, Physical

Highly stretchable three-dimensional thermoelectric fabrics exploiting woven structure deformability and passivation-induced fiber elasticity

Doojoon Jang et al.

Summary: A method of achieving high thermoelectric performance and exceptional mechanical reliability of three-dimensional fabrics is proposed, which involves passivation and weaving of thermoelectric fibers. The woven fabric can harvest heat in the vertical direction and has high open-circuit voltage and power, as well as reliable mechanical stability. This new fabric holds promise for self-powered wearable electronics.

NANO ENERGY (2022)

Article Chemistry, Multidisciplinary

Durable, stretchable and washable inorganic-based woven thermoelectric textiles for power generation and solid-state cooling

Yuanyuan Zheng et al.

Summary: This study develops a strategy to produce ISC-based segmented hierarchically ternary coaxial TE fibers for manufacturing highly mechanically stable, stretchable, breathable and washable woven TETs. The TET demonstrates good mechanical and TE performance, making it suitable for on-body monitoring and solid-state cooling applications.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Article Polymer Science

Poly (3,4-ethylenedioxythiophene)/ polypyrrole/ carbon nanoparticle ternary nanocomposite films with enhanced thermoelectric properties

Yihan Wang et al.

Summary: The different impacts of graphene and multi-walled carbon nanotube on polypyrrole have been investigated. Graphene interacts stronger with PEDOT chains, and when at the appropriate ratio, it can exhibit excellent thermoelectric performance.

POLYMER (2021)

Article Instruments & Instrumentation

Development of spacer warp knitted thermoelectric generators

Anke Dallmann et al.

Summary: This paper focuses on developing spacer warp knitted thermoelectric generators that can generate electrical current from waste heat. By utilizing a structural design approach, calculation model, and manufacturing techniques, the prototypes were created and analyzed for their basic functionality in thermoelectric power generation. The use of iron and constantan wire in knitting, along with sewing silver plated copper wire strands for electrical contacting, helps in maintaining a constant thermoelectric voltage.

SMART MATERIALS AND STRUCTURES (2021)

Article Materials Science, Multidisciplinary

Incorporation of polyaniline on graphene-related materials for wearable thermoelectric applications

Anshu Panbude et al.

Summary: Polyaniline/graphene composite blended on cotton fabric through in-situ polymerization and solution process shows enhanced UV shielding ability, thermal stability, and improved electrical conductivity, making it promising for wearable thermoelectric devices.

MATERIALS LETTERS (2021)

Article Chemistry, Multidisciplinary

Textile-Based Pressure Sensing Matrix for In-Bed Monitoring of Subject Sleeping Posture and Breathing Activity

Nicola Carbonaro et al.

Summary: This research introduces a textile-based pressure sensing matrix that can be integrated into a smart mattress to analyze sleeping posture and breathing activity. The system consists of multiple sensors for sleep analysis and respiratory rate evaluation, with validation of classification and statistical accuracy.

APPLIED SCIENCES-BASEL (2021)

Article Thermodynamics

Wearable thermoelectric 3D spacer fabric containing a photothermal ZrC layer with improved power generation efficiency

Mufang Li et al.

Summary: Utilizing a photothermal-thermoelectric 3D spacer fabric, this study successfully increased the temperature gradient and power generation efficiency by combining the photothermal conversion of ZrC and the thermal insulation performance of PPSF. A wearable wristband containing 30 ZrC-PPSF units generated significantly higher voltage under sunlight compared to indoors, demonstrating the effectiveness of improving thermoelectric power generation efficiency through photothermal conversion.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Chemistry, Physical

Interface effect and band engineering in Bi2Te3:C and Bi2Te3:Ni-Cu with enhanced thermopower for self-powered wearable thermoelectric generator

V Shalini et al.

Summary: This study successfully synthesized Bi2Te3 nanostructures and applied them to carbon and nickel-copper fabrics to form TE legs, driving wearable thermoelectric devices. The Ni-Cu fabric coated with Bi2Te3 demonstrated higher electrical conductivity and Seebeck coefficient, resulting in higher output voltage. Analysis showed that environmental temperatures below 300K and above 293K are more suitable for energy harvesting from the human body.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Analytical

Multi-Point Flexible Temperature Sensor Array and Thermoelectric Generator Made from Copper-Coated Textiles

Justus Landsiedel et al.

Summary: The study demonstrated the potential of electroless deposition for producing thin-film-coated flexible textiles, allowing for the direct integration of electrical sensors and conductors in non-conductive materials. The developed flexible material could be utilized for manufacturing thermoelectric sensor arrays and generators, showing promising results in terms of thermoelectric coefficients and electric output voltages.

SENSORS (2021)

Review Chemistry, Analytical

Wearable Smart Textiles for Long-Term Electrocardiography Monitoring-A Review

Abreha Bayrau Nigusse et al.

Summary: This review assesses the application of textile electrodes for ECG monitoring, covering fabrication techniques, performance evaluation, and the impact on signal quality and user comfort. The study focuses on discussing the fabrication methods of textile electrodes and their different applications in ECG function. There is promising future development in the fields of textile, material, medical and electrical engineering towards better comfort and signal quality textile electrodes.

SENSORS (2021)

Article Chemistry, Multidisciplinary

Enhanced thermoelectric performance of graphene based nanocomposite coated self-powered wearable e-textiles for energy harvesting from human body heat

Nazakat Ali Khoso et al.

Summary: The study presents a method of fabricating wearable thermoelectric generators using rGO and PEDOT:PSS, capable of harvesting energy from low-grade body heat.

RSC ADVANCES (2021)

Article Materials Science, Multidisciplinary

The fabrication of a graphene and conductive polymer nanocomposite-coated highly flexible and washable woven thermoelectric nanogenerator

Nazakat Ali Khoso et al.

Summary: The development of a highly flexible and washable thermoelectric device with improved electrical and thermoelectric properties using graphene and polymer nanocomposite-coated textile fabric has been reported in this study. The device showed enhanced thermoelectric performance with a higher Seebeck coefficient, power factor, and figure of merit, making it a promising self-powered wearable thermoelectric generator for harvesting energy from low-grade human body heat. The tensile strength and water contact angle of the fabric were improved, while the air permeability was slightly reduced without sacrificing comfort properties.

MATERIALS ADVANCES (2021)

Article Chemistry, Physical

A gill-mimicking thermoelectric generator (TEG) for waste heat recovery and self-powering wearable devices

Yuxiang Zhu et al.

Summary: A waste heat recovery unit can efficiently convert high-temperature heat into electricity, making it a green and sustainable power source. Through bottom-up manufacturing, molecular-level polymer-nanoparticle hybridization has been scaled up to device-level units, enhancing energy conversion efficiency from nanoscale material interactions to macroscale. The flexible thermoelectric generator (fTEG) made of PANi/MWNT hybrids demonstrated highly efficient energy transformation on various surfaces, including hot water containers, car roofs, and human skin, showing great potential for powering wearable sensors.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Engineering, Electrical & Electronic

Fully printed origami thermoelectric generators for energy-harvesting

Andres Georg Roesch et al.

Summary: Researchers have developed a fully screen printed flexible origami TEG using printable thermoelectric polymers and composite materials, which can harvest energy from low-temperature environmental heat. They achieved high power output and thermal impedance matching, demonstrating a wireless energy-harvesting application.

NPJ FLEXIBLE ELECTRONICS (2021)

Article Chemistry, Multidisciplinary

Green Biocomposites for Thermoelectric Wearable Applications

Pietro Cataldi et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Nanoscience & Nanotechnology

All-Polymer Conducting Fibers and 3D Prints via Melt Processing and Templated Polymerization

Anna I. Hofmann et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Materials Science, Multidisciplinary

Robust PEDOT:PSS Wet-Spun Fibers for Thermoelectric Textiles

Youngseok Kim et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2020)

Article Multidisciplinary Sciences

Stretchable fabric generates electric power from woven thermoelectric fibers

Tingting Sun et al.

NATURE COMMUNICATIONS (2020)

Review Materials Science, Multidisciplinary

Smart Textile-Based Personal Thermal Comfort Systems: Current Status and Potential Solutions

Jordan Tabor et al.

ADVANCED MATERIALS TECHNOLOGIES (2020)

Article Materials Science, Multidisciplinary

Thermoelectric textile with fibers coated by copper iodide thin films

N. P. Klochko et al.

THIN SOLID FILMS (2020)

Article Instruments & Instrumentation

3D spacer fabrics for thermoelectric textile cooling and energy generation based on aluminum doped zinc oxide

G. Schmidl et al.

SMART MATERIALS AND STRUCTURES (2020)

Article Chemistry, Physical

Flexible cellulose nanofiber/Bi2Te3 composite film for wearable thermoelectric devices

Xuan Zhao et al.

JOURNAL OF POWER SOURCES (2020)

Article Chemistry, Physical

A polymer-based textile thermoelectric generator for wearable energy harvesting

Anja Lund et al.

JOURNAL OF POWER SOURCES (2020)

Review Materials Science, Multidisciplinary

Textile-Based Thermoelectric Generators and Their Applications

Liming Wang et al.

ENERGY & ENVIRONMENTAL MATERIALS (2020)

Article Materials Science, Multidisciplinary

Highly conductive wet-spun PEDOT:PSS fibers for applications in electronic textiles

Ruben Sarabia-Riquelme et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Article Engineering, Electrical & Electronic

Smart Textile Integrated Wireless Powered Near Field Communication Body Temperature and Sweat Sensing System

Yutong Jiang et al.

IEEE JOURNAL OF ELECTROMAGNETICS RF AND MICROWAVES IN MEDICINE AND BIOLOGY (2020)

Article Chemistry, Physical

Carbon nanotube yarn based thermoelectric textiles for harvesting thermal energy and powering electronics

Yuanyuan Zheng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Physical

Enhanced thermoelectric properties of Sb2Te3 and Bi2Te3 films for flexible thermal sensors

Eliana M. F. Vieira et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Materials Science, Multidisciplinary

A Textile-Integrated Polymer Thermoelectric Generator for Body Heat Harvesting

Hend M. Elmoughni et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Article Materials Science, Multidisciplinary

A Wearable All-Fabric Thermoelectric Generator

Linden K. Allison et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

Article Engineering, Electrical & Electronic

PEDOT: PSS Thermoelectric Generators Printed on Paper Substrates

Henrik Andersson et al.

JOURNAL OF LOW POWER ELECTRONICS AND APPLICATIONS (2019)

Article Materials Science, Multidisciplinary

An efficient PEDOT- coated textile for wearable thermoelectric generators and strain sensors

Yanhua Jia et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Article Materials Science, Composites

An integral p-n connected all-graphene fiber boosting wearable thermoelectric energy harvesting

Yuancheng Lin et al.

COMPOSITES COMMUNICATIONS (2019)

Article Engineering, Electrical & Electronic

Smart Textile Using Hetero-Core Optical Fiber for Heartbeat and Respiration Monitoring

Yuya Koyama et al.

IEEE SENSORS JOURNAL (2018)

Article Materials Science, Multidisciplinary

New Perspectives on Graphene/Polymer Fibers and Fabrics for Smart Textiles: The Relevance of the Polymer/Graphene Interphase

Horacio J. Salavagione et al.

FRONTIERS IN MATERIALS (2018)

Article Materials Science, Textiles

Peltier Effect in Cotton Fabric Treated with Doped Nanocellulose

Charles Jeffery Morgan et al.

AATCC JOURNAL OF RESEARCH (2018)

Proceedings Paper Engineering, Industrial

Design of smart garments for sports and rehabilitation

A. Paiva et al.

AEGEAN INTERNATIONAL TEXTILE AND ADVANCED ENGINEERING CONFERENCE (AITAE 2018) (2018)

Review Materials Science, Multidisciplinary

Flexible thermoelectric materials and devices

Yong Du et al.

APPLIED MATERIALS TODAY (2018)

Article Chemistry, Physical

All-Organic Textile Thermoelectrics with Carbon-Nanotube-Coated n-Type Yarns

Jason D. Ryan et al.

ACS APPLIED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

Toward Stretchable Self-Powered Sensors Based on the Thermoelectric Response of PEDOT:PSS/Polyurethane Blends

Prospero J. Taroni et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Thermodynamics

Flexo-green Polypyrrole - Silver nanocomposite films for thermoelectric power generation

Meetu Bharti et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Article Instruments & Instrumentation

A novel design for a wearable thermoelectric generator based on 3D fabric structure

Qian Wu et al.

SMART MATERIALS AND STRUCTURES (2017)

Article Nanoscience & Nanotechnology

Polypyrrole/Graphene/Polyaniline Ternary Nanocomposite with High Thermoelectric Power Factor

Yihan Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Multidisciplinary

Woven-Yarn Thermoelectric Textiles

Jae Ah Lee et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Multidisciplinary

Chemically exfoliated transition metal dichalcogenide nanosheet-based wearable thermoelectric generators

Jin Young Oh et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Engineering, Electrical & Electronic

Screen Printable Flexible BiTe-SbTe-Based Composite Thermoelectric Materials on Textiles for Wearable Applications

Zhuo Cao et al.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2016)

Article Chemistry, Multidisciplinary

Thermoelectric properties of PEDOT nanowire/PEDOT hybrids

Kun Zhang et al.

NANOSCALE (2016)

Proceedings Paper Materials Science, Textiles

Energy harvesting 3-D knitted spacer based piezoelectric textiles

S. Anand et al.

48th Conference of the International Federation of Knitting Technologists (IFKT) (2016)

Article Nanoscience & Nanotechnology

Enhanced Thermoelectric Performance of PEDOT:PSS Flexible Bulky Papers by Treatment with Secondary Dopants

Desalegn A. Mengistie et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Multidisciplinary Sciences

Thermoelectric Fabrics: Toward Power Generating Clothing

Yong Du et al.

Scientific Reports (2015)

Article Chemistry, Multidisciplinary

A wearable thermoelectric generator fabricated on a glass fabric

Sun Jin Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Physical

Semi-metallic polymers

Olga Bubnova et al.

NATURE MATERIALS (2014)

Article Materials Science, Multidisciplinary

Preparation and thermoelectric properties of reduced graphene oxide/PEDOT:PSS composite films

Fengyuan Li et al.

SYNTHETIC METALS (2014)

Article Chemistry, Physical

Engineered doping of organic semiconductors for enhanced thermoelectric efficiency

G-H. Kim et al.

NATURE MATERIALS (2013)

Article Chemistry, Physical

Enhancement of the thermoelectric properties of PEDOT:PSS thin films by post-treatment

Jinji Luo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Article Materials Science, Multidisciplinary

Nano/microscale pyroelectric energy harvesting: challenges and opportunities

Devashish Lingam et al.

INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS (2013)

Article Chemistry, Multidisciplinary

Air-stable fabric thermoelectric modules made of N- and P-type carbon nanotubes

Choongho Yu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Article Materials Science, Multidisciplinary

Thermoelectric properties of screen-printed ZnSb film

Heon Bok Lee et al.

THIN SOLID FILMS (2011)

Review Materials Science, Multidisciplinary

High-performance nanostructured thermoelectric materials

Jing-Feng Li et al.

NPG ASIA MATERIALS (2010)