相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。In-Situ Synthesis of Aluminum Matrix Composite from Al-NiO System by Mechanical Alloying
Samaneh Mamnooni et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Characterization of Ti-Al Intermetallic Synthesized by Mechanical Alloying Process
Manoj Kumar Yadav et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Microstructure, electrical and mechanical properties of Ti2AlN MAX phase reinforced copper matrix composites processed by hot pressing
C. Salvo et al.
MATERIALS CHARACTERIZATION (2021)
Mechanical Alloying of Immiscible Metallic Systems: Process, Microstructure, and Mechanism
Cijun Shuai et al.
ADVANCED ENGINEERING MATERIALS (2021)
The effect of silver coated copper particle content on the properties of novel Cu-Ag alloys prepared by hot pressing method
Temel Varol et al.
POWDER TECHNOLOGY (2021)
The wear and arc erosion behavior of novel copper based functionally graded electrical contact materials fabricated by hot pressing assisted electroless plating
Onur Guler et al.
ADVANCED POWDER TECHNOLOGY (2021)
The decisive impact of microstructure on the machinability of pure copper
Xiaoxiang Sun et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)
Towards sustainable copper matrix composites: Manufacturing routes with structural, mechanical, electrical and corrosion behaviour
Anbesh Jamwal et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Effects of Mg addition on the microstructure and softening resistance of Cu-Cr alloys
Yuqing Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of Cr content on microstructure and oxidation resistance of laser-clad Cu-Ni-Fe-Mo-xCr alloy coating
Yu Yang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
The effects of Cr addition on microstructure, hardness and tensile properties of as-cast Al-3.8wt.%Cu-(Cr) alloys
Thiago M. Ribeiro et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Fabrication and characterization of novel layered materials produced by electroless plating and hot pressing
Onur Guler et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Optimizing of micro-hardness of nanostructured Cu-Cr solid solution produced by mechanical alloying using ANN and genetic algorithm
Amine Torabi et al.
SN APPLIED SCIENCES (2020)
Microstructure and properties of high strength and high conductivity Cu-Cr alloy components fabricated by high power selective laser melting
Shasha Zhang et al.
MATERIALS LETTERS (2019)
Enhancing Interfacial Bonding and Tensile Strength in CNT-Cu Composites by a Synergetic Method of Spraying Pyrolysis and Flake Powder Metallurgy
Xiangyang Chen et al.
MATERIALS (2019)
The effect of flake-like morphology on the coating properties of silver coated copper particles fabricated by electroless plating
Onur Guler et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Synthesis, microstructure, and hardness of rapidly solidified Cu-Cr alloys
A. Garzon-Manjon et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of Cr on the microstructure and oxidation properties of Co-Al-W superalloys studied by in situ environmental TEM
Yanhui Chen et al.
CORROSION SCIENCE (2019)
Microstructures and electrical and mechanical properties of Cu-Cr alloys fabricated by selective laser melting
Sohei Uchida et al.
MATERIALS & DESIGN (2019)
TiO2 coating prepared by mechanical alloying treatment for photocatalytic degradation
Quantong Yao et al.
SURFACE ENGINEERING (2019)
Multifunctional porous catalyst produced by mechanical alloying
Mark A. Atwater et al.
MATERIALS RESEARCH LETTERS (2019)
Electrical conductivity anisotropy of copper matrix composites reinforced with SiC whiskers
Jiang Feng et al.
NANOTECHNOLOGY REVIEWS (2019)
Effect of magnesium on microstructure and properties of Cu-Cr alloy
Ziqian Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Microstructure and mechanical properties of consolidated Cu-Cr-CNT nanocomposite prepared via powder metallurgy
A. Ghorbani et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effects of Zr on the amorphization of Cu-Ni-Zr alloys prepared by mechanical alloying
C. Martinez et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Investigation of thermal and mechanical properties of Cu-Al alloys with silver addition prepared by powder metallurgy
Ghulam Abbas Gohar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of Ag addition on the microstructure and mechanical properties of Cu-Cr alloy
Sheng Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Investigation on the microstructure and properties of Cu-Cr alloy prepared by in-situ synthesis method
D. P. Shen et al.
VACUUM (2018)
Direct diffusion bonding of immiscible tungsten and copper at temperature close to Copper's melting point
Jie Zhang et al.
MATERIALS & DESIGN (2018)
Sintering mechanisms of Cu-Cr metallic composites
Anthony Papillon et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2017)
Influence of Grain Refinement on Oxidation Behavior of Two-Phase Cu-Cr Alloys at 973-1,073 K in Air
T. J. Pan et al.
HIGH TEMPERATURE MATERIALS AND PROCESSES (2016)
New insights on the formation of supersaturated Cu-Nb solid solution prepared by mechanical alloying
Ruoshan Lei et al.
MATERIALS CHARACTERIZATION (2016)
Thermo-mechanical responses of nanocrystalline Al-Fe alloy processed using mechanical alloying and high frequency heat induction sintering
Muneer Baig et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Characterization of nanostructured Mg-Cu-Ni powders prepared by mechanical alloying
Celal Kursun et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
An investigation on morphology and structure of Cu-Cr alloy powders prepared by mechanical milling and alloying
Qiang Fang et al.
POWDER TECHNOLOGY (2015)
Microstructure, mechanical properties and bonding characteristic of deformed tungsten
Xiaoxin Zhang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
Bulk Cu-Cr nanocomposites by high-energy ball milling and spark plasma sintering
N. F. Shkodich et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Preparation of Cu-Cr alloy powder by mechanical alloying
Qing Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Densification behavior of mechanically milled Cu-8 at% Cr alloy and its mechanical and electrical properties
S. Patra et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2014)
Novel Cu-Cr alloy matrix CNT composites with enhanced thermal conductivity
Jian Kong et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2013)
Nanostructure Cu-Cr alloy with high dissolved Cr contents obtained by mechanical alloying process
G. H. Akbari et al.
POWDER METALLURGY (2011)
Microstructure and mechanical properties of bulk nanocrystalline Al-Fe alloy processed by mechanical alloying and spark plasma sintering
T. T. Sasaki et al.
ACTA MATERIALIA (2009)
Effects of size, shape and floatage of Cu particles on the low infrared emissivity coatings
Huijuan Yu et al.
PROGRESS IN ORGANIC COATINGS (2009)
The effect of micro-crystallizing on the oxidation resistance of Cu-Cr alloy in air
Jing Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Characterization of prealloyed copper powders treated in high energy ball mill
Viseslava Rajkovic et al.
MATERIALS CHARACTERIZATION (2006)
Oxidation behavior of Cu-Cr environmental barrier coatings on Cu-8Cr-4Nb
LU Ogbuji
SURFACE & COATINGS TECHNOLOGY (2005)
Effect of mechanical alloying on the morphology, microstructure and properties of aluminium matrix composite powders
JB Fogagnolo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Influence of prior deformation on the age hardening of a phosphorus-containing Cu-0.61wt.%Cr alloy
N Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Production of Cu-Cr alloys by in-situ reduction of chromium oxide during air induction melting
VVS Prasad et al.
ISIJ INTERNATIONAL (2003)
分享论文
