☆ 4.5 Article

Optimization of accuracy in estimating the dynamic viscosity of MWCNT-CuO/oil 10W40 nano-lubricants

EGYPTIAN INFORMATICS JOURNAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Manufacturing

Grindability of titanium alloy using cryogenic nanolubricant minimum quantity lubrication

Xin Cui et al.

Summary: This research establishes calculation formulas to evaluate the grindability of Ti6Al-4V titanium alloy, and finds that cryogenic nanolubricant minimum quantity lubrication (CNMQL) exhibits the best performance in the grinding process. CNMQL significantly reduces grinding force, peak temperature, and surface roughness, while improving the ability to resist surface defects.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Review Engineering, Mechanical

Fiber-reinforced composites in milling and grinding: machining bottlenecks and advanced strategies

Teng Gao et al.

Summary: Fiber-reinforced composites have been widely used in aviation and aerospace industries due to their high-strength performance. However, their complex structure makes them difficult to machine. This review summarizes the progress in understanding the damage formation mechanisms and the strategies to suppress them during milling and grinding of fiber-reinforced composites. The review covers mechanisms of milling damage, grinding mechanisms, and various suppression strategies such as ultrasonic vibration-assisted machining, cryogenic cooling, minimum quantity lubrication (MQL), and tool optimization design.

FRONTIERS OF MECHANICAL ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Carbonyl sulfide gas detection by pure, Zn- and Cd-decorated AlP nano-sheet

Ngakan Ketut Acwin Dwijendra et al.

Summary: Density functional theory was used to investigate the effect of decorating Zn and Cd transition metals on an AlP nano-sheet's capability in detecting the gas COS. It was found that decorating Cd significantly increased the sensitivity of the AlP nano-sheet to COS, compared to decorating Zn.

MONATSHEFTE FUR CHEMIE (2022)

添加到收藏夹

Article Engineering, Mechanical

Tribology of enhanced turning using biolubricants: A comparative assessment

Xiaoming Wang et al.

Summary: The tribological behavior of cutting is crucial in determining the production cycle, cost, and quality of parts. Minimum quantity lubrication (MQL) based on environmentally friendly biolubricants can modify the contact conditions in cutting zones, but it cannot meet the requirements for machining difficult-to-machine materials. This study comprehensively analyzed the lubrication mechanism and technical performance of enhanced MQL in turning, and conducted a comparative assessment of cutting force, cutting temperature, tool wear, and surface quality under enhanced environmentally friendly lubrication turning. The study provides insights into the mechanism, tribological behavior, and development trend of lubrication in relation to continuous cutting.

TRIBOLOGY INTERNATIONAL (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Statistical modeling and investigation of thermal characteristics of a new nanofluid containing cerium oxide powder

Behrooz Ruhani et al.

Summary: This paper extracted the thermal conductivity of cerium oxide/ethylene glycol nanofluid for different temperatures and volume fractions of nanoparticles, and predicted it using Artificial Neural Network (ANN) and fitting method. The experiments showed an increase in the thermal conductivity ratio of the nanofluid with increasing volume fraction and temperature. It was observed that the rate of increase in thermal conductivity at high temperatures is higher than at low temperatures. The ANN proved to be highly effective in predicting the thermal behavior of the nanofluid.

HELIYON (2022)

添加到收藏夹

Review Engineering, Manufacturing

Electrostatic atomization minimum quantity lubrication machining: from mechanism to application

Wenhao Xu et al.

Summary: This study provides a comprehensive review and critical assessment of electrostatic atomization MQL, including its critical equipment, lubrication and heat transfer mechanisms, and comparison with pneumatic atomization MQL. Previous experiments have shown that electrostatic atomization MQL improves machining performance. Future development directions are proposed.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2022)

添加到收藏夹

Article Thermodynamics

Using perceptron feed-forward Artificial Neural Network (ANN) for predicting the thermal conductivity of graphene oxide-Al2O3/water-ethylene glycol hybrid nanofluid

Shaopeng Tian et al.

Summary: The study suggests that increasing the temperature of nanofluid has a minor impact on the volume fraction of nanoparticles, with thermal conductivity increasing by 6% at low concentrations. However, at high concentrations, increasing the temperature further enhances the thermal conductivity.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

A comprehensive review on the application of nanofluid in heat pipe based on the machine learning: Theory, application and prediction

Xianling Wang et al.

Summary: This paper introduces the key factors influencing the application of nanofluids in heat pipes: viscosity, thermal conductivity, and stability. It reviews the applications of nanofluids in different types of heat pipes and summarizes the mechanisms of heat transfer enhancement or inhibition. The study highlights challenges such as uncertainty in thermal conductivity and viscosity, as well as the need for a standard in machine learning algorithms, and suggests exploring nanoscale mechanisms and expanding databases to address these challenges.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

添加到收藏夹

Article Engineering, Chemical

Preparation of stable TiO2-Graphene/Water hybrid nanofluids and development of a new correlation for thermal conductivity

Reza Bakhtiari et al.

Summary: The study investigated the thermal conductivity coefficient variation of TiO2-Graphene/Water hybrid nanofluid, showing that an increase in temperature and volume fraction enhances thermal conductivity. The effect of volume fraction on thermal conductivity was found to be larger than the effect of temperature, particularly at higher temperatures. A model was proposed to predict the thermal conductivity of nanofluids with a small margin of error, indicating good compatibility with experimental data.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Heat transfer properties of metal, metal oxides, and carbon water-based nanofluids in the ethanol condensation process

Alireza Banisharif et al.

Summary: This study experimentally confirmed the significant enhancement of convective heat transfer by nanofluids in pipe heat exchangers for ethanol condensation. Different types of nanoparticles have varying effects on enhancing heat transfer performance.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

添加到收藏夹

Article Energy & Fuels

Viscosity, tribological and physicochemical features of ZnO and MoS2 diesel oil-based nanofluids: An experimental study

Seyed Borhan Mousavi et al.

Summary: The study investigated the effects of temperature and nanoparticle content on the viscosity, tribological properties, and physicochemical features of diesel oil-based nanofluids. ZnO and MoS2 nanoparticles were found to enhance the tribological characteristics of pure diesel oil. The addition of nanoparticles also increased the pumping power.

FUEL (2021)

添加到收藏夹

Article Thermodynamics

On the Thermal Conductivity Assessment of Oil-Based Hybrid Nanofluids using Extended Kalman Filter integrated with feed-forward neural network

Mehdi Jamei et al.

Summary: This study conducted a comprehensive data-intelligence analysis on various types of oil-based hybrid nanofluids using the Extended Kalman Filter-Neural network (EKF-ANN) approach, revealing that this model outperformed other methods in predicting thermal conductivity.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Chemistry, Physical

A comprehensive experimental investigation of dynamic viscosity of MWCNT-WO3/water-ethylene glycol antifreeze hybrid nanofluid

Yanfang Zhu et al.

Summary: This laboratory study investigated the impact of temperature and volume fraction of nanoparticles on the dynamic viscosity of MWCNT - WO3 / water - Ethylene glycol nanofluid. The results showed that the viscosity increases with temperature at a constant temperature, but decreases with temperature at a constant volume fraction. A mathematical model was proposed to estimate the viscosity based on temperature and volume fraction, which was found to be accurate for the nanofluid.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Chemistry, Physical

Examining rheological behavior of MWCNT-TiO2/5W40 hybrid nanofluid based on experiments and RSM/ANN modeling

Yu-Ming Chu et al.

Summary: The study experimentally examined the rheological behavior of MWCNT-TiO2/5W40 hybrid nanofluid, revealing that the presence of nanoparticles intensified the fluid viscosity by up to 790%. The neural network forecasting model also demonstrated acceptable results with a maximum error below 5% and R-2 = 0.999.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Energy & Fuels

Low Temperature rheological characterization of single-step silica nanofluids: An additive in refrigeration and gas hydrate drilling applications

Krishna Raghav Chaturvedi et al.

Summary: This study investigated the rheological behavior of novel single-step synthesized silica nanofluids under low-temperature and high-pressure conditions. It was found that increasing the concentration of silica nanoparticles in the solution and reducing the temperature slightly increased the viscosity, while increasing pressure had little effect. The nanofluids exhibited a viscous nature and were able to maintain dispersion stability.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

TiO2 nanoparticle-induced Xanthan Gum Polymer for EOR: Assessing the underlying mechanisms in oil-wet carbonates

Amin Keykhosravi et al.

Summary: This study systematically investigated the potential of Anatase TiO2 nanoparticles-induced Xanthan-gum polymer as a Nano-polymer suspension for enhanced oil recovery in carbonates. Results showed that the Nano-polymer suspension could improve viscosity recovery, dispersion stability of nanoparticles, wettability alteration, and oil displacement efficiency. The experimental findings indicated a 25% additional oil recovery using the Nano-polymer suspension compared to TiO2 nanofluid and polymer solution.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Engineering, Chemical

Applying Artificial Neural Networks (ANNs) for prediction of the thermal characteristics of water/ethylene glycol-based mono, binary and ternary nanofluids containing MWCNTs, titania, and zinc oxide

Xiaowei Yang et al.

Summary: An Artificial Neural Network (ANN) was used to model the thermal conductivity of hybrid nanofluids containing MWCNTs-titania-Zinc oxide in water/ethylene glycol. The experimental results showed an optimal neuron number of 26 with a maximum absolute error of less than 0.018 in 102 data points, indicating acceptable performance of the designed network.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

Established prediction models of thermal conductivity of hybrid nanofluids based on artificial neural network (ANN) models in waste heat system

Jiang Wang et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Physics, Multidisciplinary

Experimental evaluation and artificial neural network modeling of thermal conductivity of water based nanofluid containing magnetic copper nanoparticles

Mahyar Ghazvini et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2020)

添加到收藏夹

Article Thermodynamics

Using of Artificial Neural Networks (ANNs) to predict the thermal conductivity of Zinc Oxide-Silver (50%-50%)/Water hybrid Newtonian nanofluid

Wei He et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Thermal Conductivity Enhancement via Synthesis Produces a New Hybrid Mixture Composed of Copper Oxide and Multi-walled Carbon Nanotube Dispersed in Water: Experimental Characterization and Artificial Neural Network Modeling

Aliakbar Karimipour et al.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2020)

添加到收藏夹

Article Operations Research & Management Science

Forecasting the Crop Yield Production in Trichy District Using Fuzzy C-Means Algorithm and Multilayer Perceptron (MLP)

M. C. S. Geetha et al.

INTERNATIONAL JOURNAL OF KNOWLEDGE AND SYSTEMS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Ceramics

Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions

Min Yang et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Physics, Multidisciplinary

Statistical investigation for developing a new model for rheological behavior of ZnO-Ag (50%-50%)/Water hybrid updates Newtonian nanofluid using experimental data

Behrooz Ruhani et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2019)

添加到收藏夹

Article Physics, Multidisciplinary

Statistical investigation for developing a new model for rheological behavior of Silica-ethylene glycol/Water hybrid Newtonian nanofluid using experimental data

Behrooz Ruhani et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental assessment of an environmentally friendly grinding process using nanofluid minimum quantity lubrication with cryogenic air

Jianchao Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Chemistry, Physical

A novel study on rheological behavior of ZnO-MWCNT/10w40 nanofluid for automotive engines

Mohammad Hemmat Esfe et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

添加到收藏夹

Article Chemistry, Physical

An experimental determination and accurate prediction of dynamic viscosity of MWCNT(%40)-SiO2 (%60)/5W50 nano-lubricant

Mohammad Hemmat Esfe et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

添加到收藏夹

Article Chemistry, Physical

A study on rheological characteristics of hybrid nano-lubricants containing MWCNT-TiO2 nanoparticles

Mohammad Hemmat Esfe et al.

JOURNAL OF MOLECULAR LIQUIDS (2018)

添加到收藏夹

Article Thermodynamics

Thermal conductivity of a hybrid nanofluid: A new economic strategy and model

Mohammad Hemmat Esfe et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Steps optimization and productivity enhancement in a nanofluid cascade solar still

Saman Rashidi et al.

RENEWABLE ENERGY (2018)

添加到收藏夹

Article Mechanics

Application of Knudsen Thermal Force for Detection of CO2 in Low-Pressure Micro Gas Sensor

M. Barzegar Gerdroodbary et al.

FLUID DYNAMICS (2018)

添加到收藏夹

Article Engineering, Manufacturing

Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions

Min Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

添加到收藏夹

Editorial Material Mathematical & Computational Biology

Editorial: Artificial Neural Networks as Models of Neural Information Processing

Marcel van Gerven et al.

FRONTIERS IN COMPUTATIONAL NEUROSCIENCE (2017)

添加到收藏夹

Article Thermodynamics

Designing a neural network for predicting the heat transfer and pressure drop characteristics of Ag/water nanofluids in a heat exchanger

Mohammad Hemmat Esfe

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Multi-objective optimization of cost and thermal performance of double walled carbon nanotubes/water nanofluids by NSGA-II using response surface method

Mohammad Hemmat Esfe et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Experimental study on the rheological behavior of silver-heat transfer oil nanofluid and suggesting two empirical based correlations for thermal conductivity and viscosity of oil based nanofluids

Sadegh Aberoumand et al.

APPLIED THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Effects of temperature and concentration on the viscosity of nanofluids made of single-wall carbon nanotubes in ethylene glycol

Mohsen Baratpour et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Thermodynamics

Experimental investigation and development of new correlation for thermal conductivity and viscosity of BioGlycol/water based SiO2 nanofluids

M. Kh. Abdolbaqi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Chemistry, Physical

An accurate RBF-NN model for estimation of viscosity of nanofluids

Ali Barati-Harooni et al.

JOURNAL OF MOLECULAR LIQUIDS (2016)

添加到收藏夹

Article Physics, Multidisciplinary

Experimental investigation on the boiling heat transfer of nanofluids on a flat plate in the presence of a magnetic field

Ali Abdollahi et al.

EUROPEAN PHYSICAL JOURNAL PLUS (2016)

添加到收藏夹

Article Engineering, Manufacturing

Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding

Yanbin Zhang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)

添加到收藏夹

Article Engineering, Chemical

Modeling and prediction of viscosity of water-based nanofluids by radial basis function neural networks

Ningbo Zhao et al.

POWDER TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Chemical

Prediction of thermal conductivity of alumina water-based nanofluids by artificial neural networks

M. A. Ariana et al.

POWDER TECHNOLOGY (2015)

添加到收藏夹

Article Thermodynamics

Rheology of mineral oil-SiO2 nanofluids at high pressure and high temperatures

Kanjirakat Anoop et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)

添加到收藏夹

Article Materials Science, Ceramics

Effect of calcination temperature on structural, vibrational, optical, and rheological properties of zirconia nanoparticles

Elaheh K. Goharshadi et al.

CERAMICS INTERNATIONAL (2012)

添加到收藏夹

Article Chemistry, Physical

Thermal conductivity and rheological properties of graphite/oil nanofluids

Baogang Wang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2012)

添加到收藏夹

Article Chemistry, Physical

The influence of particle clustering on the rheological properties of highly concentrated magnetic nanofluids

Daniela Susan-Resiga et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2012)

添加到收藏夹

Article Thermodynamics

Effect of aggregation on the viscosity of copper oxide-gear oil nanofluids

Madhusree Kole et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2011)

添加到收藏夹

Article Chemistry, Physical

Rheological behaviour of ethylene glycol based titania nanofluids

Haisheng Chen et al.

CHEMICAL PHYSICS LETTERS (2007)

添加到收藏夹

Article Engineering, Chemical

Rheological behavior of carbon nanotube-alumina nanoparticle dispersion systems

Kathy Lu

POWDER TECHNOLOGY (2007)

添加到收藏夹

Article Physics, Applied

Thermal and rheological properties of carbon nanotube-in-oil dispersions

Ying Yang et al.

JOURNAL OF APPLIED PHYSICS (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.