☆ 4.7 Article

Modifications in the physical structure of a new two-layer micro-size heat sink with sinusoidal shaped cavities for heat transfer augmentation of nanofluid flow

ALEXANDRIA ENGINEERING JOURNAL (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mathematics, Applied

On development of heat transportation through bioconvection of Maxwell nanofluid flow due to an extendable sheet with radiative heat flux and prescribed surface temperature and prescribed heat flux conditions

Sohaib Abdal et al.

Summary: This paper evaluates the thermal output for the flow of Maxwell nanofluid over an extending sheet with bioconvection. The inclusion of nanoparticles enhances the thermal transportation, while bioconvection prevents settling of the nanoparticles. By varying the influential parameters, the flow speed and fluid temperature can be affected. The numerical results are validated by comparison with existing studies.

MATHEMATICAL METHODS IN THE APPLIED SCIENCES (2023)

添加到收藏夹

Article Thermodynamics

Experimental study on the influence of bionic channel structure and nanofluids on power generation characteristics of waste heat utilisation equipment

Jianglin Tu et al.

Summary: A bionics-based cogeneration system was designed in this study to improve waste heat utilization, with experimental results showing that using CuO-H2O nanofluids can increase the temperature at the hot end of a thermoelectric plate. The highest thermoelectric conversion efficiency was achieved with bionic structures featuring an angular frequency of 30 rad/s, an amplitude of 3 mm, and a phase shift of 180 degrees, providing guidance for the design and operation of waste heat utilization equipment.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Mathematics, Applied

Heat and mass transfer analysis for bioconvective flow of Eyring Powell nanofluid over a Riga surface with nonlinear thermal features

Usman et al.

Summary: This study investigates the rheological consequences of Eyring Powell nanofluid and the swimming characteristics of gyrotactic microorganisms in a porous medium. The results show that the parameters have a significant influence on the fluid flow and boundary layer profiles.

NUMERICAL METHODS FOR PARTIAL DIFFERENTIAL EQUATIONS (2022)

添加到收藏夹

Article Chemistry, Physical

A theoretical study on sensing properties of in-doped ZnO nanosheet toward acetylene

Peilong Xu et al.

Summary: The study demonstrates that indium doping can significantly enhance the sensitivity and selectivity of ZnO nanosheets to acetylene gas. The adsorption energy of acetylene increases significantly after indium doping, with the interaction mainly attributed to electrostatic forces. The indium-doped ZnO nanosheets can selectively detect acetylene in the presence of other gases and exhibit a short recovery time.

MOLECULAR PHYSICS (2022)

添加到收藏夹

Article Engineering, Chemical

Numerical analysis of flow and heat characteristic around micro-ribbed tube in heat exchanger system

Jianglin Tu et al.

Summary: This study analyzed the effects of different parameters on the flow and heat transfer characteristics of tube-row channel heat exchangers through numerical simulation. It was found that TiO2-H2O nanofluids can improve the performance of heat exchangers, with the best results achieved at a mass fraction of 0.4%. Adjusting the number of ribs, rib height, pitch diameter ratio, and using nanofluids can significantly increase the Nusselt numbers.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Mechanochemical reactions of GaN-Al2O3 interface at the nanoasperity contact: Roles of crystallographic polarity and ambient humidity

Jian Guo et al.

Summary: The study investigates the mechanochemical reactions at the GaN-Al2O3 interface under different environmental humidity conditions, revealing that the N-face exhibits stronger mechanochemical removal than the Ga-face. Increased water molecules in the environment significantly promote interfacial mechanochemical reactions, accelerating atomic attrition on the N-face. The hypothesized mechanism of selective water-involved mechanochemical removal is associated with the dangling bond configuration, altering the activation energy barrier to form bonding bridges across the sliding interface.

FRICTION (2022)

添加到收藏夹

Article Thermodynamics

Numerical simulation of the mixing behaviour of hot and cold fluids in the rectangular T-junction with/without an impeller

Kexin Huang et al.

Summary: Thermal stratification is the main cause of thermal fatigue failure in rectangular T-junctions. By setting an impeller with a constant rotation speed, the mixing behavior of hot and cold fluids can be improved, and various flow patterns including wall jet, deflecting jet, and impinging jet can be observed. The relationship between mixing length and blade diameter is not monotonic, and the optimal operating point is around D-p* = 0.5 for impellers with 2 blades.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Mechanical

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Shunchu Liu et al.

Summary: The study shows that laser surface textures can reduce the coefficients of friction, enhance wear resistance, and improve the dynamical performance of frictional surfaces. The surface with micro circular dimples in diameter of 150 mu m or textured area density of 25% has the best tribological and dynamical performance. Adding graphene to the lubrication oil effectively reduces frictional vibrations and noise, and surface textures enhance the frictional noise reduction performance of lubrication.

LUBRICANTS (2022)

添加到收藏夹

Article Thermodynamics

Improving the efficiency of an exhaust thermoelectric generator based on changes in the baffle distribution of the heat exchanger

Roozbeh Sheikh et al.

Summary: This study focuses on utilizing a thermoelectric generator to convert vehicle exhaust heat into electrical energy. Nine types of heat exchangers in three groups were modeled and analyzed using computational fluid dynamics with various baffle arrangements to obtain the highest power output. The results show the impact of baffle angles, thickness, heights, and distances on power generation efficiency, with recommendations for the best performing model.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Thermodynamics

Thermo-hydraulic performance of nanofluids in a bionic heat sink

Jinghua Tang et al.

Summary: The study focuses on the development of a bionic surface based on the wing structure of the dragon louse for thermal management in electronic components, as well as the behavior of Fe3O4-water nanofluids under magnetic field. Various factors affecting heat transfer, such as nanofluid concentration, Reynolds number, magnetic field angle, and intensity, were considered. Results show that the bionic surface has a significant drag reduction effect and the magnetic field has a notable influence on CPU cooling.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Chemistry, Physical

Extraordinary strength-ductility in gradient amorphous structured Zr-based alloy

Yabo Fu et al.

Summary: The study investigated the microstructure and mechanical properties of Zr-based alloys prepared by vacuum suction-cast, revealing that the alloy with gradient amorphous structure exhibited exceptional strength and ductility, with a maximum compressive strength of 1811.7 MPa and a plastic strain of 23.6%. The enhancement of strength was attributed to the presence of nanoscaled amorphous particles, oxide nanoparticles, and the toughening phase CuZr in the alloy.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Thermodynamics

Mixed convection heat transfer of a nanofluid in a closed elbow-shaped cavity (CESC)

Dariush Ebrahimi et al.

Summary: The primary objective of this study is to investigate the computational modeling of laminar mixed convection heat transfer of nanofluids inside a CESC, revealing that the use of nanofluids with higher volume fractions enhances heat transfer. Control parameters and fluid behaviors during the study process also play a significant role in affecting heat transfer efficiency.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Engineering, Chemical

Numerical simulation of flow and heat transfer characteristics of nanofluids in built-in porous twisted tape tube

Yuxing Wang et al.

Summary: The study showed that triangular tubes have better heat transfer efficiency compared to round tubes, and the use of porous twisted tape and nanofluids can significantly improve system economy and heat transfer ability, but it also comes with disordered flow and increased entropy within the tubes.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Review Energy & Fuels

Physical and hybrid modelling techniques for earth-air heat exchangers in reducing building energy consumption: Performance, applications, progress, and challenges

S. F. Ahmed et al.

Summary: This paper reviews the physical and hybrid EAHE modelling techniques used in buildings, highlighting their prospects, benefits, progress, and challenges. The study found that hybrid modelling is more effective than physical models, but requires consideration of operational conditions and key parameters during model development. In terms of generalization capability and training data, physical models have advantages.

SOLAR ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Energetic and exergetic analysis of a new circular micro-heat sink containing nanofluid: applicable for cooling electronic equipment

Muhammad Ibrahim et al.

Summary: This study conducted an exergy analysis on a novel heat sink with nanofluid stream of alumina water, revealing that increasing Reynolds number decreases the maximum and average temperature of the heat sink. This decrease is also observed with the addition of nanoparticles. Furthermore, increasing Reynolds number and volume percentage of nanoparticles result in lower output temperature values.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Mathematics, Applied

Entropy generation approach with heat and mass transfer in magnetohydrodynamic stagnation point flow of a tangent hyperbolic nanofluid

Tiehong Zhao et al.

Summary: This study examines the entropy generation in magnetohydrodynamic stagnation point flow with heat and mass transfer. Numerical analysis reveals that different flow parameters affect the rate of heat transport, friction drag, concentration, and entropy generation.

APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION (2021)

添加到收藏夹

Article Thermodynamics

Nonlinear thermally radiative heat transport for brinkman type micropolar nano-material over an inclined surface with motile microorganisms and exponential heat source

Ying-Qing Song et al.

Summary: The novel analysis investigates the characteristics of thermal radiation in bio-convective Brinkman type micropolar nanofluid, providing insights into its potential applications in nanotechnology, biotechnology, drug delivery, and more.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Engineering, Mechanical

Interplay between counter-surface chemistry and mechanical activation in mechanochemical removal of N-faced GaN surface in humid ambient

Jian Guo et al.

Summary: The mechanical removal of GaN using diamond tip and mechanochemical removal using Al2O3 tip are described by the Archard equation and mechanically assisted Arrhenius-type kinetic model, respectively. Material removal under elastic contact with the assistance of interfacial mechanochemical reactions is evident. The critical activation volume and activation barrier are determined semiquantitatively by analyzing the mechanochemical reactions with Arrhenius-type kinetic model and Hertzian contact mechanics. The mechanical activation from the chemically active counter-surface facilitates the mechanochemical atomic attrition by altering the energy barrier of the reaction kinetics.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Thermodynamics

Combined impacts of heat source/sink, radiative heat flux, temperature dependent thermal conductivity on forced convective Rabinowitsch fluid

Yu-Ming Chu et al.

Summary: This study examines the properties of thermal radiation, heat generation, and convective boundary conditions in a duct with the Rabinowitsch fluid, presenting the effects of physical parameters on temperature and velocity profiles through graphs. Thermal conductivity and heat generation parameters enhance heat transfer rates, while thermal radiation and convective boundary parameters suppress temperature within the tube. The study also provides a benchmark comparison with previously published data.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Physics, Multidisciplinary

Peristaltically driven flow of hybrid nanofluid in a sinusoidal wavy channel with heat generation

T. Salahuddin et al.

Summary: This study analyzes the heat transfer characteristics of hybrid nanofluid in a sinusoidal wavy channel during peristaltic transport. Numerical solutions for temperature and peristaltic flow are obtained and the relationships between pressure rise, temperature profile, and pressure gradient with heat generation, phase difference, and channel width variations are discussed.

PHYSICA SCRIPTA (2021)

添加到收藏夹

Article Thermodynamics

Heat transfer evaluation of a micro heat exchanger cooling with spherical carbon-acetone nanofluid

Z. X. Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Effect of Nano-Graphene Oxide and n-Butanol Fuel Additives Blended with Diesel-Nigella sativaBiodiesel Fuel Emulsion on Diesel Engine Characteristics

Hurmathulla Khan et al.

SYMMETRY-BASEL (2020)

添加到收藏夹

Article Thermodynamics

Pool boiling heat transfer to CuO-H2O nanofluid on finned surfaces

Zhixiong Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Transient pool boiling and particulate deposition of copper oxide nano-suspensions

Zhixiong Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

A novel thermal efficiency analysis on the thermo-hydraulic performance of nanofluids in an improved heat exchange system under adjustable magnetic field

Fan Fan et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Operation analysis, response and performance evaluation of a pulsating heat pipe for low temperature heat recovery

Zhixiong Li et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Mathematics, Applied

Heat transfer analysis on MHD flow over a stretchable Riga wall considering Entropy generation rate: A numerical study

Faisal Shah et al.

NUMERICAL METHODS FOR PARTIAL DIFFERENTIAL EQUATIONS (2020)

添加到收藏夹

Article Thermodynamics

Heat and mass transfer characteristics of MHD three-dimensional flow over a stretching sheet filled with water-based alumina nanofluid

P. Sudarsan A. Reddy et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Reversible calcium alloying enables a practical room-temperature rechargeable calcium-ion battery with a high discharge voltage

Meng Wang et al.

NATURE CHEMISTRY (2018)

添加到收藏夹

Article Thermodynamics

Heat transfer improvement of water/single-wall carbon nanotubes (SWCNT) nanofluid in a novel design of a truncated double-layered microchannel heat sink

Ali Akbar Abbasian Arani et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Thermodynamics

Heat and mass transfer analysis in natural convection flow of nanofluid over a vertical cone with chemical reaction

P. Sudarsana Reddy et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2017)

添加到收藏夹

Article Thermodynamics

Numerical investigation on laminar flow and heat transfer in rectangular microchannel heat sink with wire coil inserts

Zhenfei Feng et al.

APPLIED THERMAL ENGINEERING (2017)

添加到收藏夹

Article Thermodynamics

Enhancement thermodynamic performance of microchannel heat sink by using a novel multi-nozzle structure

Ngoctan Tran et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

添加到收藏夹

Article Chemistry, Physical

A Novel Aluminum-Graphite Dual-Ion Battery

Xiaolong Zhang et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Article Thermodynamics

Optimization of thermal resistance and bottom wall temperature uniformity for double-layered microchannel heat sink

Chuan Leng et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Article Thermodynamics

Experimental and numerical investigation of thermophysical properties, heat transfer and pressure drop of covalent and noncovalent functionalized graphene nanoplatelet-based water nanofluids in an annular heat exchanger

Hamed Khajeh Arzani et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2015)

添加到收藏夹

Article Thermodynamics

Investigation of nanofluids heat transfer in a ribbed microchannel heat sink using single-phase and multiphase CFD models

Z. Yari Ghale et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2015)

添加到收藏夹

Article Thermodynamics

Enhancement of the performance of a double layered microchannel heatsink using PCM slurry and nanofluid coolants

Bahram Rajabifar

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

添加到收藏夹

Article Thermodynamics

Multi-parameter optimization of flow and heat transfer for a novel double-layered microchannel heat sink

Chuan Leng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

添加到收藏夹

Article Thermodynamics

Optimization of geometry and flow rate distribution for double-layer microchannel heat sink

Lin Lin et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement of nanofluids in a double pipe heat exchanger with louvered strip inserts

H. A. Mohammed et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)

添加到收藏夹

Article Thermodynamics

Enhancement of thermal performance in double-layered microchannel heat sink with nanofluids

Tu-Chieh Hung et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Article Thermodynamics

Computational analysis of nanofluid effects on convective heat transfer enhancement of micro-pin-fin heat sinks

Hamid Reza Seyf et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2012)

添加到收藏夹

Article Thermodynamics

Experimental and numerical study of a stacked microchannel heat sink for liquid cooling of microelectronic devices

Xiaojin Wei et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2007)

添加到收藏夹

Article Thermodynamics

Conjugate natural convection in a square enclosure with inclined thin fin of arbitrary length

Abdullatif Ben-Nakhi et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2007)

添加到收藏夹

Article Thermodynamics

Effect of length and inclination of a thin fin on natural convection in a square enclosure

Abdullatif Ben-Nakhi et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2006)

添加到收藏夹

Article Engineering, Chemical

Mixed convection in a vertical porous channel

JC Umavathi et al.

TRANSPORT IN POROUS MEDIA (2005)

添加到收藏夹

Article Thermodynamics

Fully developed free convection of a micropolar fluid in a vertical channel

AJ Chamkha et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.