相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Hierarchical microstructure and enhanced mechanical properties of SLM-fabricated GH5188 Co-superalloy
W. Wei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Laser welding of a W-free precipitation strengthened Co-base superalloy
K. S. Athira et al.
JOURNAL OF MATERIALS SCIENCE (2022)
Laser-based directed energy deposition (DED-LB) of advanced materials
David Svetlizky et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Microstructure Evolution and Tensile Properties of a Selectively Laser Melted CoNi-Base Superalloy
Sean P. Murray et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2022)
Impact of boron as an alloying addition on the microstructure, thermo-physical properties and creep resistance of a tungsten-free Co-base γ/γ′ superalloy
Abhishek Sharma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
On the role of boron, carbon and zirconium on hot cracking and creep resistance of an additively manufactured polycrystalline superalloy
Arthur Despres et al.
MATERIALIA (2021)
Enabling Multi-Material Structures of Co-Based Superalloy Using Laser Directed Energy Deposition Additive Manufacturing
Beytullah Aydogan et al.
METALS (2021)
Microstructure and compressive properties of 3D-extrusion-printed, aluminized cobalt-based superalloy microlattices
Hyeji Park et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effect of Cr addition on microstructure and welding solidification cracking susceptibility of Co-Al-W based superalloys
Caiyun Liu et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Effects of Cr and Al/W ratio on the microstructural stability, oxidation property and γ′ phase nano-hardness of multi-component Co-Ni-base superalloys
Wendao Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Microstructure and creep performance of a multicomponent Co-based L12-ordered intermetallic alloy
F. R. Long et al.
ACTA MATERIALIA (2020)
Influence of Co content on the microstructures and mechanical properties of a Ni-Co base superalloy made by specific additive manufacturing process
Ling Tang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
A defect-resistant Co-Ni superalloy for 3D printing
Sean P. Murray et al.
NATURE COMMUNICATIONS (2020)
High-temperature mechanical properties of γ/γ′ Co-Ni-W-Al superalloy microlattices
Hyeji Park et al.
SCRIPTA MATERIALIA (2020)
Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys
Paraskevas Kontis et al.
ACTA MATERIALIA (2019)
Microstructural evolution and high-temperature strength of a γ(f.c.c.)/γ′(L12) Co-Al-W-Ti-B superalloy
Daniel J. Sauza et al.
ACTA MATERIALIA (2019)
Crystal plasticity assessment of inclusion- and matrix-driven competing failure modes in a nickel-base superalloy
Ritwik Bandyopadhyay et al.
ACTA MATERIALIA (2019)
Oxidation Behavior Across Composition Space Relevant to Co-based γ/γ′ Alloys
Colin A. Stewart et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
High-Temperature Oxidation of Stellite 12 Hardfacings: Effect of Mo on Characteristics of Oxide Scale
Amir Motallebzadeh et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy
Xiaoqiang Zhang et al.
MATERIALS & DESIGN (2019)
Fatigue improvement of electron beam melting-fabricated biomedical Co-Cr-Mo alloy by accessible heat treatment
Daixiu Wei et al.
MATERIALS RESEARCH LETTERS (2018)
Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting
Edouard Chauvet et al.
ACTA MATERIALIA (2018)
The initiation and propagation mechanism of the overlapping zone cracking during laser solid forming of IN-738LC superalloy
Jianjun Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification
S. S. Babu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Carbide precipitation characteristics in additive manufacturing of Co-Cr-Mo alloy via selective electron beam melting
X. P. Tan et al.
SCRIPTA MATERIALIA (2018)
Causes analysis on cracks in nickel-based single crystal superalloy fabricated by laser powder deposition additive manufacturing
Zhipeng Zhou et al.
MATERIALS & DESIGN (2018)
Microstructure evolution in L12 hardened Co-base superalloys during creep
Yuzhi Li et al.
JOURNAL OF MATERIALS RESEARCH (2017)
Application of Computational Thermodynamics to the Design of a Co-Ni-Based γ'-Strengthened Superalloy
Eric A. Lass
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing
Yen-Ling Kuo et al.
SCRIPTA MATERIALIA (2017)
Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions
Zhuqing Wang et al.
MATERIALS & DESIGN (2017)
An improved prediction of residual stresses and distortion in additive manufacturing
T. Mukherjee et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys
Trevor Keller et al.
ACTA MATERIALIA (2017)
Investigation of fatigue crack initiation from a non-metallic inclusion via high energy x-ray diffraction microscopy
Diwakar Naragani et al.
ACTA MATERIALIA (2017)
Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing
Narendran Raghavan et al.
ACTA MATERIALIA (2016)
Elemental partitioning, lattice misfit and creep behaviour of Cr containing gamma ' strengthened Co base superalloys
I. Povstugar et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718
Yuan Chen et al.
MATERIALS & DESIGN (2016)
3D-imaging of selective laser melting defects in a Co-Cr-Mo alloy by synchrotron radiation micro-CT
Xin Zhou et al.
ACTA MATERIALIA (2015)
Creep-induced planar defects in L12-containing Co- and CoNi-base single-crystal superalloys
Michael S. Titus et al.
ACTA MATERIALIA (2015)
Synthesis of a new tungsten-free γ-γ′ cobalt-based superalloy by tuning alloying additions
S. K. Makineni et al.
ACTA MATERIALIA (2015)
Novel wrought γ/γ′ cobalt base superalloys with high strength and improved oxidation resistance
S. Neumeier et al.
SCRIPTA MATERIALIA (2015)
The Thermal Stability of Intermetallic Compounds in an As-Cast SX Co-Base Superalloy
Inmaculada Lopez-Galilea et al.
ADVANCED ENGINEERING MATERIALS (2015)
The importance of sign and magnitude of γ/γ′ lattice misfit in superalloys-with special reference to the new γ′-hardened cobalt-base superalloys
Hael Mughrabi
ACTA MATERIALIA (2014)
Build direction dependence of microstructure and high-temperature tensile property of Co-Cr-Mo alloy fabricated by electron beam melting
Shi-Hai Sun et al.
ACTA MATERIALIA (2014)
Elemental partitioning and mechanical properties of Ti- and Ta-containing Co-Al-W-base superalloys studied by atom probe tomography and nanoindentation
Ivan Povstugar et al.
ACTA MATERIALIA (2014)
First approach for thermodynamic modelling of the high temperature oxidation behaviour of ternary γ′-strengthened Co-Al-W superalloys
L. Klein et al.
CORROSION SCIENCE (2014)
Effect of alloying on the oxidation behaviour of Co-Al-W superalloys
H. -Y. Yan et al.
CORROSION SCIENCE (2014)
Alloying effects in polycrystalline γ′ strengthened Co-Al-W base alloys
H. -Y. Yan et al.
INTERMETALLICS (2014)
Modeling of thermally induced damage in the processing of Cr-Al2O3 composites
Witold Weglewski et al.
COMPOSITES PART B-ENGINEERING (2012)
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Zemin Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Creep properties of different γ′-strengthened Co-base superalloys
A. Bauer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Creep deformation of single crystals of new Co-Al-W-based alloys with fcc/L12 two-phase microstructures
Katsushi Tanaka et al.
PHILOSOPHICAL MAGAZINE (2012)
Thermodynamic assessment of Co-Al-W system and solidification of Co-enriched ternary alloys
Y. F. Cui et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Interdiffusion and Atomic Mobility for Face-Centered-Cubic Co-Al Alloys
Y. -W. Cui et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
New Co-based gamma-gamma ' High-temperature Alloys
T. M. Pollock et al.
JOM (2010)
Effects of quaternary alloying elements on the γ′ solvus temperature of Co-Al-W based alloys with fcc/L12 two-phase microstructures
Masahiro Ooshima et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
An investigation on thermal, metallurgical and mechanical states in weld cracking of Inconel 738LC superalloy
Yann Danis et al.
MATERIALS & DESIGN (2010)
Microstructure and creep strength of different γ/γ′-strengthened Co-base superalloy variants
A. Bauer et al.
SCRIPTA MATERIALIA (2010)
A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process
Masoud Alimardani et al.
OPTICS AND LASERS IN ENGINEERING (2007)
Creep behaviour of Ni-base single-crystal superalloys with various γ′ volume fraction
T Murakumo et al.
ACTA MATERIALIA (2004)
The effect of grain-boundary-engineering-type processing on oxygen-induced cracking of IN718
U Krupp et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Hot tearing of nickel-based superalloys during directional solidification
J Zhang et al.
ACTA MATERIALIA (2002)
分享论文
