相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Effect of protective atmosphere and secondary treatment on filament fusion of polylactic acid composites prepared by fused deposition modeling
Qingjun Ding et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2022)
Improvement in Mechanical Properties of 3D-Printed PEEK Structure by Nonsolvent Vapor Annealing
Wenhui Chen et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2022)
Experimental investigation and optimization of printing parameters of3Dprinted polyphenylene sulfide through response surface methodology
Anouar El Magri et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2021)
3D printing of carbon-based materials: A review
P. Blyweert et al.
CARBON (2021)
Comparing polarized Raman spectroscopy and birefringence as probes of molecular scale alignment in 3D printed thermoplastics
Nora M. Hassan et al.
MRS COMMUNICATIONS (2021)
Scalable Synthesis of High Entropy Alloy Nanoparticles by Microwave Heating
Haiyu Qiao et al.
ACS NANO (2021)
Structure-property relationships in 3D-printed poly (L-lactide-co-ε-caprolactone) degradable polymer
Emilio Omar Bachtiar et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
A review of the microwave-assisted synthesis of carbon nanomaterials, metal oxides/hydroxides and their composites for energy storage applications
Nitika Devi et al.
NANOSCALE (2021)
Importance of Polymer Rheology on Material Extrusion Additive Manufacturing: Correlating Process Physics to Print Properties
Arit Das et al.
ACS APPLIED POLYMER MATERIALS (2021)
Material extrusion-based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage
Martin Spoerk et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
3D microwave printing temperature control of continuous carbon fiber reinforced composites
Nanya Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Dielectric Barrier Discharge Applicator for Heating Carbon Nanotube-Loaded Interfaces and Enhancing 3D-Printed Bond Strength
C. B. Sweeney et al.
NANO LETTERS (2020)
Rapid 3D microwave printing of continuous carbon fiber reinforced plastics
Nanya Li et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)
Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing
Peng Wang et al.
COMPOSITES PART B-ENGINEERING (2020)
Material Extrusion-Based Additive Manufacturing with Blends of Polypropylene and Hydrocarbon Resins
Arit Das et al.
ACS APPLIED POLYMER MATERIALS (2020)
Tailoring Interfacial Interactions via Polymer-Grafted Nanoparticles Improves Performance of Parts Created by 3D Printing
Dayton P. Street et al.
ACS APPLIED POLYMER MATERIALS (2020)
Semi-Crystalline Polymer Blends for Material Extrusion Additive Manufacturing Printability: A Case Study with Poly(ethylene terephthalate) and Polypropylene
Camden A. Chatham et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2019)
Radio Frequency and Microwave Heating of Preceramic Polymer Nanocomposites with Applications in Mold-Free Processing
Nutan Patil et al.
ADVANCED ENGINEERING MATERIALS (2019)
Structure Development in Polymers during Fused Filament Fabrication (FFF): An in Situ Small- and Wide-Angle X-ray Scattering Study Using Synchrotron Radiation
Aurora Nogales et al.
MACROMOLECULES (2019)
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Guo Dong Goh et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Three-Dimensional Printing with Waste High-Density Polyethylene
Aniket Gudadhe et al.
ACS APPLIED POLYMER MATERIALS (2019)
Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing
Martin Spoerk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
The effects of voids on structural properties of fused deposition modelled parts: a probabilistic approach
Sigmund A. Tronvoll et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
The barriers to the progression of additive manufacture: Perspectives from UK industry
L. E. J. Thomas-Seale et al.
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2018)
Increased fracture toughness of additively manufactured amorphous thermoplastics via thermal annealing
Kevin R. Hart et al.
POLYMER (2018)
Predicting strength of additively manufactured thermoplastic polymer parts produced using material extrusion
Joseph Bartolai et al.
RAPID PROTOTYPING JOURNAL (2018)
Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends
Gianluca Cicala et al.
MATERIALS (2018)
Effect of processing conditions on crystallization kinetics during materials extrusion additive manufacturing
Lily A. Northcutt et al.
POLYMER (2018)
3D printing of carbon fibre-reinforced plastic parts
Yuki Nakagawa et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)
Martin Spoerk et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material
Chuncheng Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing
Claire McIlroy et al.
JOURNAL OF RHEOLOGY (2017)
Weld formation during material extrusion additive manufacturing
Jonathan E. Seppala et al.
SOFT MATTER (2017)
Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating
Charles B. Sweeney et al.
SCIENCE ADVANCES (2017)
Diels-Alder Reversible Thermoset 3D Printing: Isotropic Thermoset Polymers via Fused Filament Fabrication
Kejia Yang et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Manufacturing and Security Challenges in 3D Printing
Steven Eric Zeltmann et al.
JOM (2016)
Evolution in Surface Morphology During Rapid Microwave Annealing of PS-b-PMMA Thin Films
Zhe Qiang et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2016)
Optimization of fused deposition modeling process parameters: a review of current research and future prospects
Omar A. Mohamed et al.
ADVANCES IN MANUFACTURING (2015)
Process characterisation of 3D-printed FDM components using improved evolutionary computational approach
V. Vijayaraghavan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Modern Microwave Methods in Solid-State Inorganic Materials Chemistry: From Fundamentals to Manufacturing
Helen J. Kitchen et al.
CHEMICAL REVIEWS (2014)
On reducing anisotropy in 3D printed polymers via ionizing radiation
Steven Shaffer et al.
POLYMER (2014)
Generalized localization model of relaxation in glass-forming liquids
David S. Simmons et al.
SOFT MATTER (2012)
The Scherrer equation versus the 'Debye-Scherrer equation'
Uwe Holzwarth et al.
NATURE NANOTECHNOLOGY (2011)
Modulus-density scaling behaviour and framework architecture of nanoporous self-assembled silicas
Hongyou Fan et al.
NATURE MATERIALS (2007)
Microwave synthesis of nanoporous materials
GA Tompsett et al.
CHEMPHYSCHEM (2006)
High-temperature microwave processing of materials
YV Bykov et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2001)
Structure development during shear flow-induced crystallization of i-PP: In-situ small-angle X-ray scattering study
RH Somani et al.
MACROMOLECULES (2000)
X-ray diffraction studies on the stress transfer of transversely loaded carbon fibre reinforced composite
T Nishino et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)
Cooling rate influences in carbon fibre/PEEK composites. Part 1. Crystallinity and interface adhesion
SL Gao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)
分享论文
