☆ 4.8 Article

Additive manufacturing of a functionally graded high entropy alloy using a hybrid powder-bed wire-based direct energy deposition approach

ADDITIVE MANUFACTURING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Materials Science, Multidisciplinary

Large-scale metal additive manufacturing: a holistic review of the state of the art and challenges

Thomas Lehmann et al.

Summary: Additive Manufacturing (AM) through robotic systems and direct energy deposition techniques provides a new way of production for large-scale parts, allowing for flexible sizing from sub-metre to multi-metre. The technology not only eliminates geometric constraints but also significantly reduces lead time for parts delivery. The research covers various aspects from materials, microstructures to robotic build platforms and post-processing steps.

INTERNATIONAL MATERIALS REVIEWS (2022)

添加到收藏夹

Article Chemistry, Physical

Additive manufacturing of in-situ strengthened dual-phase AlCoCuFeNi high-entropy alloy by selective electron beam melting

Mina Zhang et al.

Summary: The application scope and market demand for additive-manufactured high-entropy alloys (AM HEAs) have broadened of late. A dual-phase AlCoCuFeNi HEA was fabricated by selective electron beam melting (SEBM) with superior compressive strength and ductility. Further improvements were achieved using selective electron beam remelting (SEB-RM) during SEBM, resulting in better compressive properties.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Physical

A comprehensive study of phase transitions in Al0.5CoCrFeNi high-entropy alloy at intermediate temperatures (400 ≤ T ≤ 900 °C)

Einat Strumza et al.

Summary: High-entropy alloys (HEAs) are a class of alloys with wide application prospects. Among them, AlxCoCrFeNi-based HEAs show different phase composition and evolution at different temperatures. Experimental results were compared with thermodynamic calculations.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of inter-layer remelting frequency on the microstructure evolution and mechanical properties of equimolar CoCrFeNiMn high entropy alloys during in-situ powder-bed arc additive manufacturing (PBAAM) process

Jun Wang et al.

Summary: In this study, an equiatomic CoCrFeNiMn High Entropy Alloy (HEA) was successfully deposited using the powder-bed arc additive manufacturing (PBAAM) process, and its phase evolution, crystallographic orientation, dislocation morphology, precipitation, and mechanical performance were investigated. The results showed that the PBAAMed CoCrFeNiMn HEA has a stable solid-solution FCC structure and improved mechanical properties.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of WMoTaNbTi refractory high-entropy alloys fabricated by selective electron beam melting

Bang Xiao et al.

Summary: WMoTaNbTi RHEAs formed by SEBM with negative defocus distance were studied. The results show that the decrease in scanning speed leads to vaporization of Nb and Ti elements, weakening the solid-solute strengthening and reducing the content of Nb and Ti solutes in the matrix, resulting in improved ductility and decreased microhardness. The as-deposited WMoTaNbTi RHEA formed at a scanning speed of 2.5 m/s exhibits high ultimate strength.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strain hardening and strengthening mechanism of laser melting deposition (LMD) additively manufactured FeCoCrNiAI0.5 high-entropy alloy

Lisong Zhu et al.

Summary: In this study, FeCoCrNiAl0.5 high-entropy alloy (HEA) with low cost and excellent mechanical properties was fabricated using laser melting deposition. The strain hardening behavior of the HEA was analyzed, and it exhibited good strain hardening behavior with a dual-phase structure. The study provided an innovative insight into the development of HEAs with ordered phase by laser additive manufacturing for structural applications.

MATERIALS CHARACTERIZATION (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

The B2 phase-driven microstructural heterogeneities and twinning enable ultrahigh cryogenic strength and large ductility in NiCoCr-based medium-entropy alloy

D. D. Zhang et al.

Summary: This study designed a duplex medium-entropy alloy with outstanding mechanical responses at low temperatures, showing that its strength and ductility vary with temperature. The alloy exhibits excellent strength-ductility synergy, especially with unique B2 cracking behavior observed at low temperatures.

ACTA MATERIALIA (2022)

添加到收藏夹

Editorial Material Materials Science, Multidisciplinary

Ductile and ultrahigh-strength eutectic high-entropy alloys by large-volume 3D printing

Yiping Lu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Powder plasma arc additive manufactured CoCrFeNi(SiC)x high-entropy alloys: Microstructure and mechanical properties

Qingkai Shen et al.

Summary: In this study, powder plasma arc additive manufacturing (PPA-AM) was used for the first time to fabricate CoCrFeNi(SiC)(x) (x = 0, 0.1, 0.3 and 0.5) HEAs. It was found that with increasing of SiC content, the microstructure of CoCrFeNi(SiC)(x) HEAs changed, leading to significant improvements in both hardness and yield strength. The main strengthening mechanism of the HEAs was identified as solid-solution and second phase strengthening.

MATERIALS LETTERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy

Zhongji Sun et al.

Summary: One major hindrance in alloy design for additive manufacturing (AM) is hot tearing, and a new approach of segregation engineering can effectively prevent hot tearing and achieve systematic additive manufacturing of alloys.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures

Mingliang Wang et al.

Summary: EHEAs are a hot topic in research due to their excellent properties, with the development of a novel AlCr1.3TiNi2 EHEA showing low density and outstanding mechanical properties. The new EHEA demonstrates higher hardness and specific yield strength values compared to traditional alloys.

SCRIPTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase transition and heterogeneous strengthening mechanism in CoCrFeNiMn high-entropy alloy fabricated by laser-engineered net shaping via annealing at intermediate-temperature

Yunjian Bai et al.

Summary: The study demonstrates that annealing at low/intermediate temperatures can effectively enhance the mechanical properties of additively manufactured HEAs alloys, improving both strength and ductility. A ternary heterogeneous strengthening mechanism involving equiaxed grains, columnar grains, and sigma precipitates was identified as contributing to this enhancement.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimizing mechanical and magnetic properties of AlCoCrFeNi high-entropy alloy via FCC to BCC phase transformation

Chendong Zhao et al.

Summary: The study investigates the FCC to BCC/B2 phase transformation in AlCoCrFeNi HEA, revealing that increasing heat treatment temperature and duration leads to increased yield strength and saturation magnetization but decreased fracture strain. Optimizing the transformation and size of B2 phases can achieve an excellent combination of mechanical and magnetic properties.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of high entropy alloys: A practical review

Ahmad Ostovari Moghaddam et al.

Summary: The novel concept of high entropy alloys (HEAs) has led to the discovery of several promising materials with outstanding properties. Additive manufacturing (AM) provides new opportunities for fabricating complex HEAs and tailoring their microstructure. Future developments in HEAs are expected as the interest in AM of HEAs continues to grow.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Enhancing mechanical properties of Al0.25CoCrFeNi high-entropy alloy via cold rolling and subsequent annealing

Yixuan He et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of γ′-phase particles on the orientation and temperature dependence of the mechanical behaviour of Al0.3CoCrFeNi high-entropy alloy single crystals

I. V. Kireeva et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unveiling the Electronic Origin for Pressure-Induced Phase Transitions in High-Entropy Alloys

Wei-Hong Liu et al.

MATTER (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

An as-cast high-entropy alloy with remarkable mechanical properties strengthened by nanometer precipitates

Gang Qin et al.

NANOSCALE (2020)

添加到收藏夹

Article Engineering, Manufacturing

Linear patterning of high entropy alloy by additive manufacturing

J. Karimi et al.

MANUFACTURING LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

Manufacturing and Analysis of High-Performance Refractory High-Entropy Alloy via Selective Laser Melting (SLM)

Hang Zhang et al.

MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Elemental segregation in an AlCoCrFeNi high-entropy alloy - A comparison between selective laser melting and induction melting

Dennis Karlsson et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

The strengthening effects of relatively lightweight AlCoCrFeNi high entropy alloy

Quanwei Tian et al.

MATERIALS CHARACTERIZATION (2019)

添加到收藏夹

Article Optics

Laser additive manufacturing of compositionally graded AlCrFeMoVx (x=0 to 1) high-entropy alloy system

Bharat Gwalani et al.

OPTICS AND LASER TECHNOLOGY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Influence of ordered L12 precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy

Bharat Gwalani et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Characterization of nano-sized precipitation and dislocations and the correlation with mechanical properties of a low alloy TRIP-aided steel

Z. J. Xie et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fatigue behaviour of a laser beam welded CoCrFeNiMn-type high entropy alloy

Nikolai Kashaev et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additively manufactured CoCrFeNiMn high-entropy alloy via pre-alloyed powder

Pan Wang et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing

Bharat Gwalani et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Friction and wear behavior of a single-phase equiatomic TiZrHfNb high-entropy alloy studied using a nanoscratch technique

Y. X. Ye et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al2(Ni,Co,Fe,Cr)14 compositions

Y. Ma et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Increasing the creep resistance of Fe-Ni-Al-Cr superalloys via Ti additions by optimizing the B2/L2(1) ratio in composite nano-precipitates

Sung-Il Baik et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Chemistry, Physical

Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method

Mu Li et al.

INTERMETALLICS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of hot isostatic pressing on the microstructure and mechanical properties of additive manufactured AlxCoCrFeNi high entropy alloys

Jithin Joseph et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of metallic components - Process, structure and properties

T. DebRoy et al.

PROGRESS IN MATERIALS SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Effect of Co content on the mechanical properties of A2 and B2 phases in AlCoxCrFeNi high-entropy alloys

Minju Kang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Characterization of wire arc additively manufactured titanium aluminide functionally graded material: Microstructure, mechanical properties and oxidation behaviour

Jun Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Predictive multiphase evolution in Al-containing high-entropy alloys

L. J. Santodonato et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

CoCrFeNiTi-based high-entropy alloy with superior tensile strength and corrosion resistance achieved by a combination of additive manufacturing using selective electron beam melting and solution treatment

Tadashi Fujieda et al.

MATERIALS LETTERS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Additive manufacturing of an aluminum matrix composite reinforced with nanocrystalline high-entropy alloy particles

G. M. Karthik et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

The BCC/B2 Morphologies in AlxNiCoFeCr High-Entropy Alloys

Yue Ma et al.

METALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermal stability and grain boundary strengthening in ultrafine-grained CoCrFeNi high entropy alloy composite

Praveen Sathiyamoorthi et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy

B. Gwalani et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures

F. Otto et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Metallurgy of high-silicon steel parts produced using Selective Laser Melting

Michele Garibaldi et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

A precipitation-hardened high-entropy alloy with outstanding tensile properties

J. Y. He et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi

E. J. Pickering et al.

SCRIPTA MATERIALIA (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Dislocations and deformation microstructure in a B2-ordered Al28Co20Cr11Fe15Ni26 high-entropy alloy

Michael Feuerbacher

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Review Materials Science, Multidisciplinary

Functionally graded materials: A review of fabrication and properties

Minoo Naebe et al.

APPLIED MATERIALS TODAY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

B. Schuh et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted AlxCoCrFeNi high entropy alloys

Jithin Joseph et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Crystallographic Tool Box (CrysTBox): automated tools for transmission electron microscopists and crystallographers

Miloslav Klinger et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase composition and solid solution strengthening effect in TiZrNbMoV high-entropy alloys

Y. D. Wu et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy

Kaka Ma et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system

J. Y. He et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Creep properties and microstructure of a precipitation-strengthened ferritic Fe-Al-Ni-Cr alloy

Nhon Q. Vo et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Chemistry, Physical

Damping behavior of AlxCoCrFeNi high-entropy alloys by a dynamic mechanical analyzer

S. G. Ma et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Chemistry, Physical

Alloying, thermal stability and strengthening in spark plasma sintered AlxCoCrCuFeNi high entropy alloys

R. Sriharitha et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Microstructures and properties of high-entropy alloys

Yong Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Grain growth and the Hall-Petch relationship in a high-entropy FeCrNiCoMn alloy

W. H. Liu et al.

SCRIPTA MATERIALIA (2013)

添加到收藏夹

Article Microscopy

Phase separation in equiatomic AlCoCrFeNi high-entropy alloy

A. Manzoni et al.

ULTRAMICROSCOPY (2013)

添加到收藏夹

Article Chemistry, Physical

Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys

Woei-Ren Wang et al.

INTERMETALLICS (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Properties of multilayered mullite/Mo functionally graded materials fabricated by powder metallurgy processing

G Jin et al.

MATERIALS CHEMISTRY AND PHYSICS (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.