☆ 4.6 Article

Corrosion Behaviors of Fe-22Cr-16Mn-0.55N High-Nitrogen Austenitic Stainless Steel in 3.5% NaCl Solution

COATINGS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Corrosion behavior of single- and poly-crystalline dual-phase TiAl-Ti3Al alloy in NaCl solution

Dongpeng Wang et al.

Summary: To investigate the correlation between single-crystalline structure and corrosion performance in high-strength TiAl alloys, the electrochemical and surface characterization of Ti-45Al-8Nb dual-phase single crystals and polycrystalline counterparts were compared in NaCl solution. The results showed that the dual-phase single crystals exhibited a lower corrosion rate, higher pitting potential, and a more compact passive film with a higher impedance of charge transfer compared to the polycrystals. This enhanced corrosion resistance can be attributed to the more homogeneous microstructure and composition distribution in the dual-phase single crystals.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of oxygen impurity on corrosion behavior of a Zr-based bulk metallic glass in 0.5 M H2SO4 and 0.5 M NaOH solutions

J. Jiang et al.

Summary: This study investigates the effects of oxygen impurity on the corrosion behavior of Zr61Ti2Cu25Al12 BMGs in different solutions. The results show that oxygen impurity has a positive effect on the corrosion resistance in 0.5 M NaOH, while it has no effect in 0.5 M H2SO4.

MATERIALS LETTERS (2023)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Corrosion and impact-abrasion-corrosion behaviors of quenching-tempering martensitic Fe-Cr alloy steels

Zhi-bin Zheng et al.

Summary: This study investigates the corrosion and impact-abrasion-corrosion behaviors of quenching-tempering Fe-Cr martensitic steels for ball mill liner compared with high manganese steel in a corrosive slurry from a copper mine. The results show that the corrosion resistance and protectiveness of the passive film of Fe-Cr martensitic steels decrease with increasing carbon content. The quenching-tempering Fe-Cr martensitic steel exhibits better impact-abrasion-corrosion resistance in the corrosive slurry, especially the alloy steel with a carbon content of 0.3 wt.%. Mechanical damage plays the most significant role in the impact-abrasion-corrosion behaviors of the steels.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of boron on dissolution and repairing behavior of passive film on S31254 super-austenitic stainless steel immersed in H2SO4 solution

Tong-hao Wang et al.

Summary: The impact of boron on the dissolution and repairing behavior of passive films formed on S31254 super-austenitic stainless steel was investigated. The study found that the addition of boron can increase the corrosion resistance and promote the efficiency of passive film repair.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Precipitation behavior of P550 steel for non-magnetic drill collars during isothermal aging at 650-900 °C

Li-wei Xu et al.

Summary: The precipitation behavior of P550 steel for non-magnetic drill collars was investigated, with cellular Cr2N being the main precipitate formed at 650-900 degrees C. The precipitation of cellular Cr2N at 750 degrees C was found to be the most sensitive, with short-range intergranular diffusion of Cr controlling initial precipitation and long-range bulk diffusion of Cr controlling growth during long-term aging. Additionally, increasing nitrogen content promoted the nucleation and driving force for cellular Cr2N precipitation.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synergistic effects of deposits and sulfate reducing bacteria on the corrosion of carbon steel

J. Yang et al.

Summary: The synergistic effects of deposits and sulfate reducing bacteria (SRB) on the corrosion of carbon steel were investigated through experiments. The results showed that deposits and SRB contributed synergistically to both uniform and localized corrosion. The uneven distribution of iron sulfides produced by SRB promoted under-deposit corrosion (UDC), while deposits accelerated SRB corrosion due to UDC-induced accumulation of SRB.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of aging treatment on microstructure and corrosion behavior of a Fe-18Cr-15Mn-0.66N stainless steel

Yanxin Qiao et al.

Summary: The effect of aging treatment on the microstructure and corrosion behavior of a high-nitrogen stainless steel (HNSS) was investigated. The aging treatment led to the precipitation of Cr2N particles along the grain boundaries, and the morphology changed from dispersive particles to a continuous network. Aging time had minor effects on corrosion potential and corrosion current density, but resulted in a sharp decrease in the pitting corrosion potential. The passive film behaved as a n-type semiconductor, and the donor density of the passive film increased with aging time. However, the fraction of stable oxide (Cr2O3) in the passive film decreased with aging time. The aging treatment weakened the corrosion resistance of HNSS by deteriorating the protectiveness of the passive film.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Erosion-corrosion resistance of Mo-Ti- and Ni-Cr-Mo-alloyed medium-carbon martensitic steels: a critical analysis of synergistic effect of erosion and corrosion

De-fa Li et al.

Summary: This study compares the erosion-corrosion resistance of Mo-Ti-alloyed medium-carbon martensitic steel with Ni-Cr-Mo-alloyed medium-carbon martensitic steel under impingement by NaCl solution with gravels. It is found that the erosion-corrosion rate of Mo-Ti-alloyed steel is relatively lower, which is due to the reduction of synergistic effect caused by surface plastic deformation and work hardening.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Metastable pitting corrosion behavior of laser powder bed fusion produced Ti-6Al-4V in Hank's solution

Yu-Wei Cui et al.

Summary: This study investigated the metastable pitting corrosion behavior of LPBF-produced Ti-6Al-4V in Hank's solution using electrochemical methods. The LPBF-produced sample showed a higher frequency of pit nucleation compared to the annealed counterpart, mainly due to the passive films formed on the LPBF-produced sample having a higher flux of oxygen vacancies, absorbing more aggressive ions and producing more cation vacancies.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Electrochemical Behavior and Passive Film Composition of a High-Nitrogen Nickel-Free Austenitic Stainless Steel

Yanxin Qiao et al.

Summary: The electrochemical corrosion behavior of an aged Fe-18Cr-15Mn-0.66 N high-nitrogen austenitic stainless steel in 3.5 wt.% NaCl solution was studied, showing that the passive films formed were mainly composed of Cr oxide/hydroxide and iron oxides. XPS depth profile analysis indicated an increase in Cr and Fe contents near the passive film/HNSS interface, while the contents of Cr and Fe oxide/hydroxide decreased.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2022)

添加到收藏夹

Article Construction & Building Technology

Passive film modification by concrete carbonation: Re-visiting a corrosion-resistant steel with Cr and Mo

Jing Ming et al.

Summary: Carbonation can modify the passive film of corrosion-resistant steel in alkaline concrete, with different effects based on the content of carbonate/bicarbonate ions. This study provides insights into the application of corrosion-resistant steels in carbonated concrete.

CEMENT & CONCRETE COMPOSITES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of hydrogen charging on microstructural evolution and corrosion behavior of Ti-4Al-2V-1Mo-1Fe alloy

Yanxin Qiao et al.

Summary: Hydrogen charging induces the formation and growth of hydrides in Ti-4Al-2V-1Mo-1Fe alloy, leading to hydrogen-induced cracks, changes in passivity, and increased pitting corrosion susceptibility.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Performance of different microstructure on electrochemical behaviors of laser solid formed Ti-6Al-4V alloy in NaCl solution

Tuo Qin et al.

Summary: The study systematically investigated the effects of different heat treatments on the electrochemical behavior of Ti-6Al-4V alloy, showing that the annealed sample had better corrosion resistance and passivation film stability. Additionally, the uniform distribution of elements was found to play a significant role in the formation of passivation films.

CORROSION SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Corrosion Behavior of a Nickel-Free High-Nitrogen Stainless Steel with Hydrogen Charging

Yanxin Qiao et al.

Summary: The research found that hydrogen charging not only increased the passive current density of high-nitrogen stainless steel, but also increased its resistance to pitting. This was attributed to the increase in carrier density, decrease in chromium content, and decrease in the ratio of oxygen ions to hydroxide ions in the passive film.

JOM (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additive manufacturing of steel-copper functionally graded material with ultrahigh bonding strength

Chaolin Tan et al.

Summary: Additive manufacturing technology is used to process functionally graded materials with high bonding strength, as demonstrated by the successful development of a steel-copper FGM using laser powder bed fusion. X-ray tomography was used to evaluate the low porosity level and the fine dendritic grains in the interface, which contribute to the high interfacial strength. Mechanical and fatigue tests confirmed the ultrahigh bonding strength in FGMs, surpassing that of traditional manufacturing methods, with discussion on the mechanisms involved.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Application of Grain Boundary Engineering to Improve Intergranular Corrosion Resistance in a Fe-Cr-Mn-Mo-N High-Nitrogen and Nickel-Free Austenitic Stainless Steel

Feng Shi et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Comparison Study on the Semiconductive and Dissolution Behaviour of 316L and Alloy 625 in Hydrochloric Acid Solution

Zhu Wang et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

On nitrogen diffusion during solution treatment in a high nitrogen austenitic stainless steel

Rui Zhou et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of grain size and its uniformity on corrosion resistance of rolled 316L stainless steel by EBSD and TEM

Xiaoqian Fu et al.

MATERIALS TODAY COMMUNICATIONS (2020)

添加到收藏夹

Article Electrochemistry

Solid-Solution Effect on Grain Boundary Character Distribution and Corrosion Resistance of 304 Stainless Steel

Zhao Yanan et al.

RUSSIAN JOURNAL OF ELECTROCHEMISTRY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Grain character and mechanical properties of Fe-21Cr-15Ni-6Mn-Nb non-magnetic stainless steel after solution treatment

Yan-Lei Song et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation on ultra-pure ferritic stainless steel 436L susceptibility to intergranular corrosion using optimised double loop electrochemical potentiokinetic reactivation method

Jiakun Sun et al.

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural bandings evolution behavior and their effects on microstructure and mechanical property of super-austenitic stainless steel

Yansen Hao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influences of niobium and solution treatment temperature on pitting corrosion behaviour of stabilised austenitic stainless steels

Guanshun Bai et al.

CORROSION SCIENCE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural evolution and pitting corrosion behavior of friction stir welded joint of high nitrogen stainless steel

H. Zhang et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Local electrochemistry of reinforcement steel - Distribution of open circuit and pitting potentials on steels with different surface condition

M. Stefanoni et al.

CORROSION SCIENCE (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Synthesis and Electrochemical Behavior of High-Nitrogen Nickel-Free Austenitic Stainless Steel

Shicheng Sun et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)

添加到收藏夹

Article Materials Science, Biomaterials

In-vitro long term and electrochemical corrosion resistance of cold deformed nitrogen containing austenitic stainless steels in simulated body fluid

Mohd Talha et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of solution heat-treatment and nitrogen in shielding gas on the resistance to pitting corrosion of hyper duplex stainless steel welds

Soon-Tae Kim et al.

CORROSION SCIENCE (2011)

添加到收藏夹

Article Electrochemistry

New findings on intergranular corrosion mechanism of stabilized stainless steels

Jeong Kil Kim et al.

ELECTROCHIMICA ACTA (2011)

添加到收藏夹

Article Electrochemistry

The effect of Cu addition on the electrochemical corrosion and passivation behavior of stainless steels

Emeka E. Oguzie et al.

ELECTROCHIMICA ACTA (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Semiconducting and passive film properties of nitrogen-containing type 316LN stainless steels

S. Ningshen et al.

CORROSION SCIENCE (2007)

添加到收藏夹

Article Electrochemistry

Influence of nanocrystallization on passive behavior of Ni-based superalloy in acidic solutions

Li Liu et al.

ELECTROCHIMICA ACTA (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation reactions caused by nitrogen uptake during service at high temperatures of a niobium stabilised austenitic steel

J Erneman et al.

ACTA MATERIALIA (2004)

添加到收藏夹

Article Engineering, Manufacturing

Fabrication of high strength high nitrogen stainless steel with excellent corrosion resistance and its mechanical properties

Y Katada et al.

MATERIALS AND MANUFACTURING PROCESSES (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

NH3 probing of the surface acidity of passive films on chromium

H Ma et al.

CORROSION SCIENCE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.