Study on Microstructure and Oxidation Resistance Mechanism of Y-Modified NiCrAlY Coating Prepared by Pack Cementation

The existence mode of Y is an important factor affecting the oxidation resistance of NiCrAlY coating. The traditional thermal sprayed NiCrAlY coating had some problems such as internal-stress-induced coating peeling, when it was used at high temperature for a long time. In this paper, Y-modified NiCrAlY coatings were prepared on the surface of thermal-sprayed NiCrAlY coatings by halide-activated pack-cementation technology. The microstructure and oxidation resistance of the coatings after thermal insulation at 1100 degrees C for 100 h were analyzed. The results show that the oxidation resistance of Y-modified NiCrAlY coatings was improved significantly. When the oxidation temperature and time were 1100 degrees C and 100 h, the oxidation weight gain of thermal sprayed NiCrAl0.5Y and NiCrAl1.0Y coatings was 3.8 and 2.2 times that of Y-modified coatings, respectively. In addition, the NiCrAlY coatings prepared by pack cementation had better oxidation resistance than thermal sprayed coatings when the content of Y was equal. The oxidation resistance of the pack-cemented NiCrAlY coatings were increased with the increase in Y content when it was in a range of 0 similar to 1 wt.%. When oxidized at 1100 degrees C for 100 h, the oxidation weight gain of the pack-cemented NiCrAl0.5Y and NiCrAl1.0Y coatings was about 1.8 and 0.9 mg/cm(2), respectively. The formation of highly stable intermetallic compounds Ni5Y in the pack-cemented Y-modified coatings is concluded to be the reason for improving the oxidation resistance of the coatings. This work can provide a solution to improve the oxidation resistance of traditional MCrAlY coatings.

Automated summary

In this study, Y-modified NiCrAlY coatings were prepared on the surface of thermal-sprayed NiCrAlY coatings. The oxidation resistance of the Y-modified coatings was significantly improved compared to traditional thermal sprayed coatings. The formation of highly stable intermetallic compounds Ni5Y in the Y-modified coatings was identified as the reason for the enhanced oxidation resistance.