☆ 4.6 Article

An Experimental Study on Adhesion Strength of Offshore Atmospheric Icing on a Wind Turbine Blade Airfoil

COATINGS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Effects of blade airfoil chord length and rotor diameter on aerodynamic performance of straight-bladed vertical axis wind turbines by numerical simulation

Guoqiang Tong et al.

Summary: In this study, the aerodynamic characteristics of straight-bladed vertical axis wind turbines (SB-VAWTs) were investigated using numerical simulation, with a focus on the effects of airfoil chord length and rotor diameter. A dimensionless parameter RCC was proposed and its recommended ranges were determined for different scenarios. The study confirms the significance of RCC in the design of SB-VAWTs and provides practical references for the parametric structural design.

ENERGY (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced Surface Icephobicity on an Elastic Substrate

Zhiwei He et al.

Summary: Elastic icephobic substrates demonstrate excellent surface icephobicity by enhancing water repellency and reducing ice adhesion strength. The ice adhesion strength can be further lowered by rationally tuning the elastic modulus and surface textures, and combining with other passive anti-icing strategies. The introduction of an elastic substrate into icephobic surface design offers great potential for outdoor anti-icing applications.

LANGMUIR (2022)

添加到收藏夹

Article Mechanics

Solidification of a hollow sessile droplet under forced convection

Truong V. Vu et al.

Summary: This study presents a numerical analysis of the solidification process of a forced convection droplet on a cooling surface. The study found that an increase in the temperature of the forced flow leads to slower solidification, while increasing the flow strength shortens the solidification process. Other parameters such as the capillary number and droplet morphology also affect the solidification process.

PHYSICS OF FLUIDS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effect of Ultrasonic Vibration on the Surface Adhesive Characteristic of Iced Aluminum Alloy Plate

Yan Li et al.

Summary: In this study, the effects of ultrasonic vibration on the adhesive characteristic of ice on aluminum alloy plates were investigated through simulations and experiments. The results showed that ultrasonic vibration can reduce the adhesive force of ice.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Article Engineering, Marine

Numerical analysis of blade icing influence on the dynamic response of an integrated offshore wind turbine

Zhenju Chuang et al.

Summary: This paper proposes a CFD-WTIA coupled method to analyze the blade icing process and its influence on the overall performance of an offshore wind turbine. The results show that the blade icing affects the lift and drag coefficients, which in turn impact the power production, generator torque, rotor speed, and blade vibration.

OCEAN ENGINEERING (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Wind tunnel tests of the rime icing characteristics of a straight-bladed vertical axis wind turbine

Wenfeng Guo et al.

Summary: Icing significantly degrades the performance of wind turbines in cold and humid regions. This study conducted icing wind tunnel tests to explore the characteristics of icing on the blade surface. The experimental results demonstrate that factors such as rotational speed of the blade and tip speed ratio have significant effects on icing characteristics.

RENEWABLE ENERGY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Design of Icephobic Surfaces by Lowering Ice Adhesion Strength: A Mini Review

Zhiwei He et al.

Summary: Ice accretion can have severe consequences in daily life and sometimes lead to catastrophic events. Passive icephobic surfaces have gained attention for their ability to repel water droplets, suppress ice nucleation, and lower ice adhesion strength. The key to outdoor anti-icing applications is living with ice but with the lowest ice adhesion strength, achieved through various types of icephobic surfaces.

COATINGS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

A field study of ice accretion and its effects on the power production of utility-scale wind turbines

Linyue Gao et al.

Summary: Study examined ice accretion on 50m-long turbine blades and icing-induced power production losses. Found more ice on outboard blades, up to 0.3m thick near blade tips. Theoretical predictions matched field measurements well. Turbines rotated slower and shut down frequently during icing event, with up to 80% power loss. Aimed to bridge gap between lab studies and real-world icing phenomena.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Research and Development of a Small-Scale Icing Wind Tunnel Test System for Blade Airfoil Icing Characteristics

Lei Shi et al.

Summary: A small low-speed reflux icing wind tunnel test system was designed and constructed to study icing mechanism and anti-icing technology. The feasibility of the test system was verified, and icing tests were conducted showing consistent results between experimental and simulated ice shapes.

INTERNATIONAL JOURNAL OF ROTATING MACHINERY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

From Extremely Water-Repellent Coatings to Passive Icing Protection-Principles, Limitations and Innovative Application Aspects

Karekin D. Esmeryan

COATINGS (2020)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review of non-destructive testing on wind turbines blades

Fausto Pedro Garcia Marquez et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

An experimental study on the aerodynamic performance degradation of a wind turbine blade model induced by ice accretion process

Linyue Gao et al.

RENEWABLE ENERGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

The effect of ice type on ice adhesion

Sigrid Ronneberg et al.

AIP ADVANCES (2019)

添加到收藏夹

Article Engineering, Environmental

Study on small wind turbine icing and its performance

Lichun Shu et al.

COLD REGIONS SCIENCE AND TECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Physical

Rational strategy for the atmospheric icing prevention based on chemically functionalized carbon soot coatings

Karekin D. Esmeryan et al.

APPLIED SURFACE SCIENCE (2016)

添加到收藏夹

Article Engineering, Environmental

Analytical model based on experimental data of centrifuge ice adhesion tests with different substrates

Frederic Guerin et al.

COLD REGIONS SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Environmental

Investigation of ice shedding properties of superhydrophobic coatings on helicopter blades

Stefania Tarquini et al.

COLD REGIONS SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Chemical

Ice Adhesion - Theory, Measurements and Countermeasures

Lasse Makkonen

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2012)

添加到收藏夹

Article Engineering, Chemical

Ice Adhesion Models to Predict Shear Stress at Shedding

Guy Fortin et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2012)

添加到收藏夹

Review Engineering, Environmental

Anti-icing and de-icing techniques for wind turbines: Critical review

Olivier Parent et al.

COLD REGIONS SCIENCE AND TECHNOLOGY (2011)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review of surface engineering issues critical to wind turbine performance

N. Dalili et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.