4.7 Article

Spheroidization behavior of W phase and transformation process of LPSO phase during solid- solution treatment in Mg-Zn-Y-Mn-Ti alloy

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Physics, Condensed Matter

Effects of Mg doping on physical properties of zinc-blende mercury selenide HgSe compound

Y. Selmani et al.

Summary: The structural, electronic, and optical properties of Hg1-xMgxSe (x = 0, 0.25, 0.5, 0.75, and 1) alloys were investigated using density functional theory calculations. The results showed that the structural parameters decreased with increasing concentration of Mg doping. The electronic properties revealed that HgSe is a semimetal, while Hg1-xMgxSe (x = 0.25, 0.5, 0.75, and 1) are semiconductors with direct bandgaps at the Gamma point. Furthermore, the optical parameters were studied, including the real and imaginary parts of the dielectric function, refractive index, absorption coefficient, reflectivity, optical conductivity, and energy loss function.

PHYSICA B-CONDENSED MATTER (2022)

Article Nanoscience & Nanotechnology

Effects of 14H LPSO phase on the dynamic recrystallization and work hardening behaviors of an extruded Mg-Zn-Y-Mn alloy

Jianqiang Hao et al.

Summary: The Mg-Zn-Y-Mn alloys were processed with different heat treatment techniques and extruded, resulting in specimens with and without the 14H LPSO phase. The alloy with 14H LPSO phase showed finer grains and stronger basal texture, leading to higher strength but lower elongation compared to the alloy without 14H LPSO phase. The presence of 14H LPSO phase hindered the nucleation and growth of DRX grains and affected the dynamic recrystallization and work hardening behaviors in extruded alloys.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Article Materials Science, Multidisciplinary

Hot deformation behavior and workfability of the homogenized Mg-5.8Zn-1.2Y-1Mn alloy containing I and W phases

Jianqiang Hao et al.

Summary: In this study, compression tests were conducted on homogenized Mg-6Zn-1.2Y-1Mn alloy using a thermo-mechanical simulator to investigate its flow behavior, dynamic recrystallization evolution, and hot workability. The optimal hot working region of the alloy was found to be a temperature of 325-400 degrees C and a strain rate of 0.005-0.05 s-1, based on processing maps and finite element analysis.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Article Nanoscience & Nanotechnology

Enhancement of strength and ductility of SiCp/AZ91 composites by RD-ECAP processing

Qiong Xu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Article Physics, Applied

Characterization of the Equiatomic Quaternary Heusler Alloy ZnCdRhMn: Structural, Electronic, and Magnetic Properties

S. Idrissi et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2020)

Article Physics, Applied

Magnetic Properties of Carbon Co-Doped (Zn,Mn)O Using LDA and LDA-SIC Approximations

F. Goumrhar et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2019)

Article Nanoscience & Nanotechnology

Influence of micro-alloying with Cd on growth pattern, mechanical properties and microstructure of as-cast Mg94Y2.5Zn2.5Mn1 alloy containing LPSO structure

Yonggang Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Nanoscience & Nanotechnology

Effects of spheroidizing treatment on the dynamic recrystallization behavior and yield asymmetry of an extruded Mg94Zn2.5Y2.5Mn1 alloy

Jianqiang Hao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Chemistry, Physical

Optimum parameters and kinetic analysis for hot working of a solution-treated Mg-Zn-Y-Mn magnesium alloy

Jianqiang Hao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Nanoscience & Nanotechnology

Effects of Ti addition on the formation of LPSO phase and yield asymmetry of Mg-Zn-Y-Mn alloy

Jianqiang Hao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Article Metallurgy & Metallurgical Engineering

Spheroidizing Behavior and Spheroidizing Kinetics of W-phase During Solid-Solution Treatment in Mg-Zn-Y-Mn-(B) Alloys

Kai Yang et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2017)

Article Nanoscience & Nanotechnology

Effect of microalloying with boron on the microstructure and mechanical properties of Mg-Zn-Y-Mn alloy

Kai Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Article Nanoscience & Nanotechnology

Cottrell atmospheres along dislocations in long-period stacking ordered phases in a Mg-Zn-Y alloy

W. W. Hu et al.

SCRIPTA MATERIALIA (2016)

Article Nanoscience & Nanotechnology

Effects of Ca on the formation of LPSO phase and mechanical properties of Mg-Zn-Y-Mn alloy

Jie Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Article Nanoscience & Nanotechnology

A high strength and good ductility Mg-Y-NI-TI alloy with long period stacking ordered structure processed by hot rolling and aging treatment

Shouzhong Wu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Article Materials Science, Multidisciplinary

Hot deformation and processing map of an as-extruded Mg-Zn-Mn-Y alloy containing I and W phases

N. Tahreen et al.

MATERIALS & DESIGN (2015)

Article Nanoscience & Nanotechnology

Effects of Mn addition and X-phase on the microstructure and mechanical properties of high-strength Mg-Zn-Y-Mn alloys

Fugang Qi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Article Metallurgy & Metallurgical Engineering

Effect of Y addition on microstructure and mechanical properties of Mg-Zn-Mn alloy

Fu-gang Qi et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)

Article Materials Science, Multidisciplinary

Precipitation and Hardening in Magnesium Alloys

Jian-Feng Nie

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)

Article Metallurgy & Metallurgical Engineering

Effect of mole ratio of Y to Zn on phase constituent of Mg-Zn-Zr-Y alloys

Luo Su-qin et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)

Article Materials Science, Multidisciplinary

Effect of long-period stacking ordered phase on mechanical properties of Mg97Zn1Y2 extruded alloy

K. Hagihara et al.

ACTA MATERIALIA (2010)

Article Materials Science, Multidisciplinary

The 18R and 14H long-period stacking ordered structures in Mg-Y-Zn alloys

Y. M. Zhu et al.

ACTA MATERIALIA (2010)

Article Chemistry, Physical

Effect of W-phase on the mechanical properties of as-cast Mg-Zn-Y-Zr alloys

D. K. Xu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2008)

Article Materials Science, Multidisciplinary

Formation and mechanical properties of Mg97Zn1RE2 alloys with long-period stacking ordered structure

Yoshihito Kawamura et al.

MATERIALS TRANSACTIONS (2007)

Article Nanoscience & Nanotechnology

Effect of microstructure and texture on the mechanical properties of the as-extruded Mg-Zn-Y-Zr alloys

D. K. Xu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

Article Chemistry, Physical

The influence of element Y on the mechanical properties of the as-extruded Mg-Zn-Y-Zr alloys

D. K. Xu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2006)

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of extruded Mg-Zn-Y alloys with 14H long period ordered structure

Shintaro Yoshimoto et al.

MATERIALS TRANSACTIONS (2006)

Article Nanoscience & Nanotechnology

Influence of Mn content on mechanical properties and fatigue behavior of extruded Mg alloys

SA Khan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Article Materials Science, Multidisciplinary

Effects of Zn/Y ratio on microstructure and mechanical properties of Mg-Zn-Y alloys

JY Lee et al.

MATERIALS LETTERS (2005)

Article Nanoscience & Nanotechnology

Long period stacking structures observed inMg97Zn1Y2 alloy

T Itoi et al.

SCRIPTA MATERIALIA (2004)

Article Nanoscience & Nanotechnology

Effects of yttrium on microstructure and mechanical properties of hot-extruded Mg-Zn-Y-Zr alloys

Y Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Article Materials Science, Multidisciplinary

Rapidly solidified powder metallurgy Mg97Zn1Y2Alloys with excellent tensile yield strength above 600 MPa

Y Kawamura et al.

MATERIALS TRANSACTIONS (2001)