☆ 4.7 Review

Phase-field simulation of nano-a′ precipitates under irradiation and dislocations

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Radiation induced segregation near dislocations and symmetric tilt grain boundaries in Fe-Cr alloys: A phase-field study

G. F. Bouobda Moladje et al.

Summary: This study coupled a phase-field model with point defects and chemical species transport equations to successfully predict radiation induced segregation around dislocations in Fe-Cr alloys. Despite numerous model parameters, unknown experimental information, and approximations made, the numerical results are in good agreement with experimental results.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of grain boundary planes on radiation-induced segregation (RIS) at near Σ3 grain boundaries in Fe-Cr alloy under ion irradiation

Q. Barres et al.

Summary: Investigated the effect of grain boundary variations on radiation-induced segregation in Ferritic Martensitic and ODS steels. Quantified the structural characteristics and chemical composition of grain boundaries using multiple techniques. Results showed W-shaped profiles of Cr across grain boundaries and heterogeneous precipitation of Cr-C rich particles on grain boundary planes.

MATERIALS CHARACTERIZATION (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of interfacial energy anisotropy in dendrite orientation in Al-Zn alloys: A phase field study

Yuhong Zhao et al.

Summary: The influence of interfacial energy anisotropy on dendrite morphology was investigated in Al-Zn alloys using the phase-field method. Different types of dendrite morphology were observed, and the occurrence of solute segregation holes and liquid grooves in dendrites was found to be influenced by the anisotropic interfacial energy. Supersaturation was found to be strongly correlated with the formation of liquid holes and liquid grooves as well as the degree of solute segregation. The relationship between interfacial energy anisotropy, Zn concentration, elastic anisotropy, and dendrite orientation deserves attention.

MATERIALS & DESIGN (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

From classical thermodynamics to phase-field method

Long-Qing Chen et al.

Summary: The article focuses on the phase-field method as a density-based computational method for modeling and predicting temporal microstructure and property evolution during materials processes. It discusses the connections between phase-field equations and classical thermodynamics, as well as the relationships of continuum phase-field equations at different levels. Additionally, it examines the contributions of long-range interactions to domain structure evolution during phase transformations.

PROGRESS IN MATERIALS SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Vitro Degradability, Microstructural Evaluation, and Biocompatibility of Zn-Ti-Cu-Ca-P Alloy

Navaneethakrishnan Gopal et al.

Summary: In this research, zinc was alloyed with other nutrient metals to make a guided bone regeneration material. The physical, chemical, and biological properties of the alloy were studied and discussed through various tests and analysis methods.

NANOMATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analysis of large edge breakage of WC-Co cemented carbide tool blades emerging in precision grinding process

Li Wei et al.

Summary: This paper analyzes the edge damage characteristics of WC-Co cemented carbide cutting blade after precision grinding. The study explores the impact of residual stress, microstructure, and element content changes on edge damage. The results reveal that increased residual compressive stress and changes in surface element content result in crack formation at the edge. The grinding experiment was optimized using an orthogonal experimental method, identifying the single grinding amount as the most influential factor on processing time and the rotation speed and single grinding amount as the factors with the greatest impact on blade rejection rate.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Biodegradable magnesium metal matrix composites for biomedical implants: synthesis, mechanical performance, and corrosion behavior-a review

Ramachandran Krishnan et al.

Summary: This review article summarizes the use of biodegradable magnesium metal matrix composites in biomedical implants and discusses the effects of reinforcing materials' reactions with the matrix and synthesis processes on the material properties.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Three-dimensional microstructure evolution of Ti-6Al-4V during multi-layer printing: a phase-field simulation

X. X. Yao et al.

Summary: Remelting and grain growth have a significant impact on microstructural evolution during the multilayer printing process. The study found that undercooling determines the extent of heterogeneous nucleation and controls the columnar-to-equiaxed transition (CET). Thermal undercooling contributes more to grain formation, and increasing build height is beneficial for CET. Additionally, decreasing the scanning velocity leads to grain coarsening.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Co-precipitated Ni/Mn shell coated nano Cu-rich core structure: A phase-field study

Yuhong Zhao

Summary: This study investigates the formation paths, diversity patterns, segregation modes, and magnetic effect of Ni/Mn shell-coated Cu-rich particles in Fe-15at. % Cu-1at. %Mn-1at. %Ni alloy using the phase-field method. The research reveals the coexistence of three nucleation mechanisms and the appearance of four structural patterns during precipitation, growth, and coarsening. The Cu-rich nanoparticles transform from bcc-a-Cu to fcc-g-Cu, while the Ni/Mn shell remains bcc and precipitates on the surface of bcc-a-Cu, fcc-g-Cu, or both. The Ni/Mn shell inhibits crystal structure transformation and phase separation. Adjusting aging time, magnetic field, and elastic field conditions can yield different microstructures and mechanical properties.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Laser powder bed fusion of eutectic Al-Ni alloys: Experimental and phase-field studies

G. Boussinot et al.

Summary: This study investigates the Laser Powder-Bed Fusion processing of several near-eutectic Al-Ni alloys experimentally and numerically through phase-field simulations. The research reveals the influence of solidification velocity on the microstructure and alloy concentration, as well as the drift of the coupled zone towards higher concentrations with increasing solidification velocity. The phase-field simulations support the experimental observations.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Coupling phase field with creep damage to study γ′ evolution and creep deformation of single crystal superalloys

Min Yang et al.

Summary: By using a phase-field model coupled with elastoplastic deformation and creep damage, the microstructural evolution and deformation behavior of Ni-Al single crystal alloy during creep processing were successfully simulated, with the validity of the model verified through experiments. The study found that the gamma ' phases coarsen along the direction parallel to the axis of tensile stress during creep, forming spindle-shaped and wavy phases during tertiary creep. Additionally, with increasing creep stress, the directional coarsening of gamma ' phase accelerates, leading to an increased steady-state creep rate and decreased creep life.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-scale phase-field modeling of layer-by-layer powder compact densification during solid-state direct metal laser sintering

Xiao Wang et al.

Summary: This study revealed the mechanisms of layer-by-layer powder compact densification during S-DMLS with different PSDs using a multi-scale computational framework. The impact of layer-wise manufacturing on densification, as well as the influences of laser beam size and scanning speed, were comprehensively explored.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Physics, Applied

Liquid phase stratification induced by large temperature gradient during spinodal decomposition in Fe-Cr alloys: A phase-field study

Lifei Du et al.

Summary: A numerical study was conducted on the spinodal decomposition in Fe-40at.%Cr binary alloy using a phase-field model based on the Cahn-Hilliard equation. The effects of temperature gradients on solute distribution characteristics during spinodal decomposition were investigated, revealing the possibility of achieving metastable stratification with specified temperature distribution. Critical temperature and corresponding temperature gradient were determined for achieving obvious solute stratification in the binary Fe-Cr alloy.

MODERN PHYSICS LETTERS B (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Ultrahigh specific strength in a magnesium alloy strengthened by spinodal decomposition

Tongzheng Xin et al.

Summary: Magnesium alloys can be strengthened through various methods such as dislocation accumulation, grain refinement, deformation twinning, and spinodal decomposition. The spinodal strengthened ultralightweight Mg alloy in this study achieves specific yield strengths surpassing almost every other engineering alloy, with lattice mismatch at the diffuse transition region between spinodal zones and matrix being the dominating factor for enhancing yield strength.

SCIENCE ADVANCES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical simulation of microstructure evolution in Ni-based superalloys during P-type rafting using multiphase-field model and crystal plasticity

Yaqian Zhang et al.

COMPUTATIONAL MATERIALS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Growth competition between columnar dendrite and degenerate seaweed during directional solidification of alloys: Insights from multi-phase field simulations

Hui Xing et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase-field simulation of effects of normal strain on the morphology and kinetics evolution of nanoscale phase

Xinwen Tong et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Cr content on compositional evolution and precipitation kinetics of γ' phase in Ni-Al-Cr alloy: 2D phase-field simulation

Shengshun Jin et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase- fi eld simulation of γ' precipitates rafting and creep property of Co-base superalloys

Dong Wang et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Chemistry, Physical

Vacancy and interstitial atom evolution with the separation of the nanoscale phase in Fe-Cr alloys: phase-field simulations

Zhengwei Yan et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase-field simulation for the evolution of solid/liquid interface front in directional solidification process

Yuhong Zhao et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Flux effects in precipitation under irradiation - Simulation of Fe-Cr alloys

Jia-Hong Ke et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Rapid solidification of non-stoichiometric intermetallic compounds: Modeling and experimental verification

Jianbao Zhang et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

On α′ precipitate composition in thermally annealed and neutron-irradiated Fe-9-18Cr alloys

Elaina R. Reese et al.

JOURNAL OF NUCLEAR MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of applied strain on phase separation of Fe-28 at.% Cr alloy: 3D phase-field simulation

Lihui Zhu et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Application of the thermodynamic extremal principle to diffusion-controlled phase transformations in Fe-C-X alloys: Modeling and applications

Wangwang Kuang et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Physics, Condensed Matter

Atomistic Simulation of the Segregation of Alloying Elements Close to Radiation-Induced Defects in Irradiated Fe-Cr-Ni BCC Alloys

A. V. Bakaev et al.

JOURNAL OF SURFACE INVESTIGATION (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

The mechanical and thermodynamic properties of Heusler compounds Ni2XAl (X = Sc, Ti, V) under pressure and temperature: A first-principles study

Zhiqin Wen et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Radiation-accelerated precipitation in Fe-Cr alloys

Frederic Soisson et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Atomic-based phase-field method for the modeling of radiation induced segregation in Fe-Cr

J. B. Piochaud et al.

COMPUTATIONAL MATERIALS SCIENCE (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Kinetics of α′ precipitation in an electron-irradiated Fe15Cr alloy

O. Tissot et al.

SCRIPTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Mn partitioning on nanoscale precipitation and mechanical properties of ferritic steels strengthened by NiAl nanoparticles

Z. B. Jiao et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Article Chemistry, Physical

The structural, elastic, electronic properties and Debye temperature of D022-Ni3V under pressure from first-principles

Yuhong Zhao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Atom probe study of irradiation-enhanced α′ precipitation in neutron-irradiated Fe-Cr model alloys

Wei-Ying Chen et al.

JOURNAL OF NUCLEAR MATERIALS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Non-classical nuclei and growth kinetics of Cr precipitates in FeCr alloys during ageing

Yulan Li et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

α′ precipitation in neutron-irradiated Fe-Cr alloys

Mukesh Bachhav et al.

SCRIPTA MATERIALIA (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of thermal aging temperature and Cr content on phase separation kinetics in Fe-Cr alloys simulated by the phase field method

Shu-xiao Li et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Critical assessment of Cr-rich precipitates in neutron-irradiated Fe-12 at%Cr: Comparison of SANS and APT

F. Bergner et al.

JOURNAL OF NUCLEAR MATERIALS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of radiation on spinodal decomposition of ferrite in duplex stainless steel

K. Fujii et al.

JOURNAL OF NUCLEAR MATERIALS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cr precipitation in neutron irradiated industrial purity Fe-Cr model alloys

V. Kuksenko et al.

JOURNAL OF NUCLEAR MATERIALS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase decomposition and morphology characteristic in thermal aging Fe-Cr alloys under applied strain: A phase-field simulation

Yong-Sheng Li et al.

JOURNAL OF NUCLEAR MATERIALS (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

A phase-field and electron microscopy study of phase separation in Fe-Cr alloys

Peter Hedstrom et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Metropolis Monte-Carlo simulation of segregation in Fe-Cr alloys

Evgeny E. Zhurkin et al.

JOURNAL OF NUCLEAR MATERIALS (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Phase field simulation of precipitates morphology with dislocations under applied stress

Yong-sheng Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

Article Chemistry, Physical

Estimate of the Hall-Petch and Orowan effects in the nanocrystalline Cu with Al2O3 dispersoid

Sung-In Hahn et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of dislocations on spinodal decomposition in Fe-Cr alloys

Yong-Sheng Li et al.

JOURNAL OF NUCLEAR MATERIALS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

The hardening of iron-chromium alloys under thermal ageing: An atomistic study

G. Bonny et al.

JOURNAL OF NUCLEAR MATERIALS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mobility of dislocations in thermal aged and irradiated Fe-Cr alloys

D. Terentyev et al.

JOURNAL OF NUCLEAR MATERIALS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Compositional patterning in immiscible alloys driven by irradiation

RA Enrique et al.

PHYSICAL REVIEW B (2001)

添加到收藏夹

Article Physics, Multidisciplinary

Compositional patterning in systems driven by competing dynamics of different length scale

RA Enrique et al.

PHYSICAL REVIEW LETTERS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.