☆ 4.7 Article

Effects of heating rate on mechanical and dielectric properties of the Si3N4f/BN/Si3N4 composites by PIP

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Materials Science, Ceramics

Dielectric and mechanical properties of hypersonic radome materials and metamaterial design: A review

Taylor Kenion et al.

Summary: This review paper examines ten current ceramic radome materials under research and development and provides a comprehensive overview of available high temperature and high frequency data from literature. An examination of metamaterials for radio-frequency transparent radomes is given and our preliminary experimental results of a high-temperature metamaterial design are presented. The next-generation hypersonic vehicles' radome temperatures will exceed 1000 degrees C and speeds will exceed Mach 5. An ideal radome material will have a high flexural strength, low dielectric constant and loss tangent, and high resistance to thermal shock and corrosion. The microstructural effect on the dielectric and mechanical properties and the effects of environmental factors such as rain are discussed. The impact of metamaterial structure on key radome factors such as boresight error, gain, and polarization is examined. After examining the associated benefits with the use of metamaterials, our preliminary results for a potential high-temperature metamaterial design are presented.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Fracture behaviour of SiC/SiC ceramic matrix composite at room temperature

Justine Delage et al.

Summary: Ceramic matrix composites have excellent thermo-mechanical properties but lack standardized methods for characterizing fracture toughness. This study investigates the fracture behavior of silicon carbide materials reinforced by SiC fibers, identifying the toughening mechanisms and evaluating the fracture parameters.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Review Materials Science, Ceramics

Review of additive manufacturing and densification techniques for the net- and near net-shaping of geometrically complex silicon nitride components

Trevor G. Aguirre et al.

Summary: Silicon nitride (Si3N4) is a versatile material with unique properties that make it suitable for various applications. Additive manufacturing has enabled the fabrication of geometrically complex Si3N4 components, opening up new possibilities for its applications.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Modelling and analysis of aircraft radome using different materials

M. Pavan Chandra et al.

Summary: Radome is a crucial component in aircraft that protects the antenna and allows the transmission and reception of radio wave signals. The selection of materials and structural analysis play a significant role in determining the optimal radome design. This study utilizes Solid Works and Ansys software to model and analyze different radome materials, aiming to find the most suitable material for various aircraft applications.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Materials Science, Ceramics

The control of interfacial bonding state and optimization of mechanical properties of Si3N4f/BN/Si3N4 composites via different synthesis technologies

Jie Zhou et al.

Summary: Si3N4f/BN/Si3N4 composites prepared by PIP process exhibit better mechanical properties, with flexural strength and fracture toughness about twice and 1.5 times higher than those prepared by CVI process. Weakening the interfacial bond and achieving a proper modulus matching relationship between fibers and matrix through PIP process significantly enhances the mechanical properties of the composites compared to CVI process.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Failure behavior of interfacial domain in SiC-matrix based composites

Jinxue Ding et al.

Summary: The study investigated the microstructure, failure behavior, and interfacial properties of SiCf/BN/SiC and C-f/PyC/SiC composites using the fiber push-in test. The findings showed differences in the mechanical response of the interfacial domain, with SiCf/BN/SiC experiencing interface debonding accompanied by interphase fracture, while C-f/PyC/SiC exhibited interface debonding along with interphase lateral slipping without any interphase fracture. The calculated interfacial shear stress indicated that C-f/PyC/SiC had a weaker interfacial domain compared to SiCf/BN/SiC.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Effects of heat treatment on mechanical properties of 3D Si3N4f/BN/Si3N4 composites by PIP

Jie Zhou et al.

Summary: In this study, three-dimensional silicon nitride fiber-reinforced silicon nitride matrix composites with a boron nitride interphase were fabricated through precursor infiltration and pyrolysis process. The thermal stability of the composites was analyzed by heat treatment at 1000-1200 degrees C, showing changes in flexural strength and fracture toughness with a pattern of decrease followed by increase. The influence mechanisms of heat treatment on the composites include matrix shrinkage, defects formation, and improved interfacial bonding strength.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Review Materials Science, Ceramics

High temperature ceramic radomes (HTCR)-A review

Abanti Nag et al.

Summary: Radome, an enclosure for radar antenna in military aircraft and missiles, is classified based on function type and operation speed. While composite laminates are suitable for subsonic applications, ceramics are the only option for high-speed military aerospace applications. Silicon nitride based radome materials with controlled porosity are proposed as futuristic high temperature materials for supersonic applications.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Review Materials Science, Ceramics

Advances in modifications and high-temperature applications of silicon carbide ceramic matrix composites in aerospace: A focused review

Xiulei Wang et al.

Summary: This article provides a detailed review of measures to enhance the high-temperature mechanical properties of silicon carbide ceramic matrix composites, focusing on toughness, high-temperature stability, and wear resistance. It discusses common processing methods and applications in aerospace, as well as the advantages and disadvantages of various processing techniques. The high-temperature mechanical properties are mainly influenced by the properties of the matrix, added phase, and interface bonding.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Ceramics

Effects of pyrolysis temperatures on the oxidation behavior of PIP-processed SiCf/SiC composites

Lian-Yi Wang et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Dielectric response and electromagnetic wave absorption of novel macroporous short carbon fibers/mullite composites

Lan Long et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Tailoring dielectric properties of PDCs-SiCN with bimodal pore-structure by annealing combined with oxidation

Mingxing Li et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Effects of heat treatment on mechanical and dielectric properties of 3D Si3N4f/BN/Si3N4 composites by CVI

Jie Zhou et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Sintering temperature dependent micro and macro mechanical properties of Si3N4f/SiO2 composite materials

Uejin Yang et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical and electromagnetic wave absorption properties of Cf-Si3N4 ceramics with PyC/SiC interphases

Wei Zhou et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation of porous silicon nitride ceramics by microwave sintering and its performance evaluation

Xiao Chun-Fang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation of porous silicon nitride ceramics by freeze drying

Xiao Chun-fang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Materials Science, Ceramics

Effect of SNNWS content on the microstructure and properties of SNNWS/Si-C-N ceramic composites via PIP

Yuanyi Zheng et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Chemistry, Physical

Mechanical and Dielectric Properties of Two Types of Si3N4 Fibers Annealed at Elevated Temperatures

Jie Zhou et al.

MATERIALS (2018)

添加到收藏夹

Article Mechanics

Mechanical behavior of 2D and 3D weaved SiC-matrix, carbon-continuous-fibre-reinforced composites: Part 2. Fracture toughness under static loading conditions

A. G. Paradkar et al.

ENGINEERING FRACTURE MECHANICS (2017)

添加到收藏夹

Article Nuclear Science & Technology

Effect of pyrolysis temperatures on the performance of SiCf/SiC composites

Yuxin Chai et al.

FUSION ENGINEERING AND DESIGN (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Design, Preparation and Properties of Carbon Fiber Reinforced Ultra-High Temperature Ceramic Composites for Aerospace Applications: A Review

Sufang Tang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fabrication and properties of porous silicon nitride wave-transparent ceramics via gel-casting and pressureless sintering

Xuejin Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Review Materials Science, Multidisciplinary

Electromagnetic properties of Si-C-N based ceramics and composites

Xiaowei Yin et al.

INTERNATIONAL MATERIALS REVIEWS (2014)

添加到收藏夹

Article Materials Science, Ceramics

Influence of surface fibre properties and textural organization of a pyrocarbon interphase on the interfacial shear stress of SiC/SiC minicomposites reinforced with Hi-Nicalon S and Tyranno SA3 fibres

E. Buet et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Acoustic emission characterization of fracture toughness for fiber reinforced ceramic matrix composites

Hui Mei et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Materials Science, Composites

A methodology to measure the interface shear strength by means of the fiber push-in test

M. Rodriguez et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2012)

添加到收藏夹

Article Materials Science, Ceramics

Characterization of a Modified Polyvinylsilazane Preceramic Polymer

Timothy P. Coons et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis and characterization of polyvinylsilazane as a precursor for Si3N4 based ceramic materials

Justin W. Reutenauer et al.

JOURNAL OF MATERIALS SCIENCE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design, preparation, and structure of particle preforms for Si3N4(P)/Si3N4 radome composites prepared using chemical vapor infiltration process

Yongsheng Liu et al.

JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING (2008)

添加到收藏夹

Review Materials Science, Ceramics

Silicon-based polymer-derived ceramics: Synthesis properties and applications - A review

Ralf Riedel et al.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2006)

添加到收藏夹

Article Materials Science, Composites

Electrical conductivity and dielectric properties of PMMA/expanded graphite composites

W Zheng et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Article Materials Science, Ceramics

Nanoindentation of a polymer-derived amorphous silicon carbonitride ceramic

D Galusek et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interpretation of Raman spectra of disordered and amorphous carbon

AC Ferrari et al.

PHYSICAL REVIEW B (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.