☆ 4.7 Article

Reconstructing the amorphous and defective surface for efficient and stable perovskite solar cells

SCIENCE CHINA-MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Stability-limiting heterointerfaces of perovskite photovoltaics

Shaun Tan et al.

Summary: Optoelectronic devices rely on heterointerfaces between different semiconducting materials, and the energy-level alignment between them plays a crucial role in device performance. Surface treatments for perovskite solar cells can impact the energetics of the heterointerface, potentially affecting device stability. Balancing the pros and cons of surface treatments is essential for improving PSC stability.

NATURE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Damp heat-stable perovskite solar cells with tailored-dimensionality 2D/3D heterojunctions

Randi Azmi et al.

Summary: By tailoring the dimensional fragments of two-dimensional perovskite layers, damp-heat stable perovskite solar cells with high power conversion efficiencies were successfully fabricated. These cells retain over 95% of their initial value after more than 1000 hours under damp-heat test conditions, meeting one of the critical industrial stability standards for photovoltaic modules.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Crosslinkable and Chelatable Organic Ligand Enables Interfaces and Grains Collaborative Passivation for Efficient and Stable Perovskite Solar Cells

Zongwen Ma et al.

Summary: This study introduces a dual-functional organic ligand, C1, for collaborative engineering of the electrode interface and perovskite grain boundaries in organic-inorganic halide perovskite solar cells. The C1 ligand suppresses nonradiative recombination and enhances stability through chemical chelation and in situ crosslinking. The resulting solar cells demonstrate high conversion efficiency and excellent water/moisture and thermal stability.

SMALL (2022)

添加到收藏夹

Article Energy & Fuels

Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth

Yeoun-Woo Jang et al.

Summary: Researchers have developed a solid-phase method to grow phase-pure two-dimensional perovskites in perovskite solar cells, enhancing device efficiency and stability. By growing a stable two-dimensional film on top of a three-dimensional film using a solvent-free method, an intact 2D/3D heterojunction is formed, resulting in high photovoltage in the device.

NATURE ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Perovskite Passivation Strategies for Efficient and Stable Solar Cells

Cong Li et al.

Summary: This review summarizes recent progress in passivation strategies for perovskite films, including nonstoichiometric passivation, iodide vacancies filling, dimensional engineering, passivation with crosslink, physical passivation, and other methods. These strategies play a crucial role in improving the quality of perovskite films, adjusting energy band structure, reducing defect state density, and suppressing nonradiative carrier recombination. The review also proposes future development directions for passivation strategies to further enhance the performance of PSCs.

SOLAR RRL (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stability-improved perovskite solar cells through 4-tertbutylpyridine surface-passivated perovskite layer fabricated in ambient air

Sabastine Chinedu Ezike et al.

Summary: This study investigated the surface-passivation of methylammonium lead iodide perovskite solar cell using hydrophobic material to improve the stability of the solar cell performance, indicating the potential for achieving ambient stability in commercialization.

OPTICAL MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

Wei Hui et al.

Summary: A new method for synthesizing stable black-phase formamidinium lead iodide (α-FAPbI(3)) was reported, which enables the stable synthesis of α-FAPbI(3) under high temperature and humidity conditions, and maintains high efficiency under light stress.

SCIENCE (2021)

添加到收藏夹

Article Energy & Fuels

Gradient 1D/3D Perovskite Bilayer using 4-tert-Butylpyridinium Cation for Efficient and Stable Perovskite Solar Cells

Ryuji Kaneko et al.

Summary: By forming a gradient structured 1D perovskite layer on top of a 3D perovskite layer, the conversion efficiency of perovskite solar cells can be improved. Additionally, it has been discovered that the hydrophobic organic unit of TBPI can protect the 3D perovskite layer, enhancing its long-term stability.

SOLAR RRL (2021)

添加到收藏夹

Article Engineering, Environmental

Polymerization stabilized black-phase FAPbI3 perovskite solar cells retain 100% of initial efficiency over 100 days

Zidan Liu et al.

Summary: The study used an IPCG strategy to polymerize crystal grains in order to suppress the alpha-to-delta phase transition, thereby enhancing the performance and stability of FAPbI3-based perovskite solar cells. The formation of polymer Poly(D) led to increased grain size, defect passivation, black phase stabilization, and moisture blockage, resulting in significantly improved photovoltaic performance and stability of the PSCs.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Liquid medium annealing for fabricating durable perovskite solar cells with improved reproducibility

Nengxu Li et al.

Summary: The liquid medium annealing (LMA) technology shows promise in producing high-quality perovskite films and photovoltaic devices with improved crystal growth modulation and film uniformity. This method opens up an effective avenue for scalable and reproducible quality improvement in perovskite films and devices.

SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Reducing Surface Halide Deficiency for Efficient and Stable Iodide-Based Perovskite Solar Cells

Wu-Qiang Wu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Identifying the functional groups effect on passivating perovskite solar cells

Jiangsheng Xie et al.

SCIENCE BULLETIN (2020)

添加到收藏夹

Article Energy & Fuels

Enhancing Perovskite Solar Cell Performance through Femtosecond Laser Polishing

Wenchi Kong et al.

SOLAR RRL (2020)

添加到收藏夹

Article Energy & Fuels

Cascade Type-II 2D/3D Perovskite Heterojunctions for Enhanced Stability and Photovoltaic Efficiency

Shenghe Zhao et al.

SOLAR RRL (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Electron-beam-induced cracking in organic-inorganic halide perovskite thin films

Srinivas K. Yadavalli et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Chemistry, Physical

Identifying the Soft Nature of Defective Perovskite Surface Layer and Its Removal Using a Facile Mechanical Approach

Shangshang Chen et al.

JOULE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss

Mingyu Jeong et al.

SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly stable inverted methylammonium lead tri-iodide perovskite solar cells achieved by surface re-crystallization

Hyungcheol Back et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)

Eui Hyuk Jung et al.

NATURE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Evidence of Spiro-OMeTAD De-doping by tert-Butylpyridine Additive in Hole-Transporting Layers for Perovskite Solar Cells

Francesco Lamberti et al.

CHEM (2019)

添加到收藏夹

Article Chemistry, Physical

4-Tert butylpyridine induced MAPbI3 film quality enhancement for improving the photovoltaic performance of perovskite solar cells with two-step deposition route

Guohua Dong et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics

Rui Wang et al.

SCIENCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss

Jason J. Yoo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Incorporating 4-tert-Butylpyridine in an Antisolvent: A Facile Approach to Obtain Highly Efficient and Stable Perovskite Solar Cells

Ya-Han Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Physical

Enhanced Thermal Stability in Perovskite Solar Cells by Assembling 2D/3D Stacking Structures

Yun Lin et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Maximizing and stabilizing luminescence from halide perovskites with potassium passivation

Mojtaba Abdi-Jalebi et al.

NATURE (2018)

添加到收藏夹

Article Chemistry, Physical

3D-2D-0D Interface Profiling for Record Efficiency All-Inorganic CsPbBrI2 Perovskite Solar Cells with Superior Stability

Jingru Zhang et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

4-tert-Butylpyridine Free Hole Transport Materials for Efficient Perovskite Solar Cells: A New Strategy to Enhance the Environmental and Thermal Stability

Jinbao Zhang et al.

ACS ENERGY LETTERS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Unveiling the Role of tBP-LiTFSI Complexes in Perovskite Solar Cells

Shen Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

General Nondestructive Passivation by 4-Fluoroaniline for Perovskite Solar Cells with Improved Performance and Stability

Shenghe Zhao et al.

SMALL (2018)

添加到收藏夹

Article Chemistry, Physical

Lewis Acid-Base Interaction-Induced Porous PbI2 Film for Efficient Planar Perovskite Solar Cells

Kai Sun et al.

ACS APPLIED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Investigating the Role of 4-Tert Butylpyridine in Perovskite Solar Cells

Severin N. Habisreutinger et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Efficient and Stable Perovskite Solar Cells Prepared in Ambient Air Based on Surface-Modified Perovskite Layer

Chang Liu et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

添加到收藏夹

Article Energy & Fuels

Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations

Xiaopeng Zheng et al.

NATURE ENERGY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Surface State Density Determines the Energy Level Alignment at Hybrid Perovskite/Electron Acceptors Interfaces

Fengshuo Zu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Physics, Applied

Direct observation of dramatically enhanced hole formation in a perovskite-solar-cell material spiro-OMeTAD by Li-TFSI doping

Miki Namatame et al.

APPLIED PHYSICS LETTERS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Toward All Room-Temperature, Solution- Processed, High-Performance Planar Perovskite Solar Cells: A New Scheme of Pyridine-Promoted Perovskite Formation

Hong Zhang et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

The In-Gap Electronic State Spectrum of Methylammonium Lead Iodide Single-Crystal Perovskites

Valerio Adinolfi et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced Stability of Perovskite Solar Cells through Corrosion-Free Pyridine Derivatives in Hole-Transporting Materials

Youfeng Yue et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

Role of the Dopants on the Morphological and Transport Properties of Spiro-MeOTAD Hole Transport Layer

Emilio J. Juarez-Perez et al.

CHEMISTRY OF MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Role of 4-tert-Butylpyridine as a Hole Transport Layer Morphological Controller in Perovskite Solar Cells

Shen Wang et al.

NANO LETTERS (2016)

添加到收藏夹

Article Chemistry, Physical

Effects of 4-tert-butylpyridine on perovskite formation and performance of solution-processed perovskite solar cells

Yantao Shi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites

Michael M. Lee et al.

SCIENCE (2012)

添加到收藏夹

Article Multidisciplinary Sciences

Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%

Hui-Seon Kim et al.

SCIENTIFIC REPORTS (2012)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.