☆ 4.6 Article

Softening-Melting Properties and Slag Evolution of Vanadium Titano-Magnetite Sinter in Hydrogen-Rich Gases

CRYSTALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Phase transformation and slag evolution of vanadium-titanium magnetite pellets during softening-melting process

Qingqing Hu et al.

Summary: This paper investigates the softening-melting behavior of vanadium-titanium magnetite (VTM) pellets and reveals that the softening temperature of the pellets is 75 degrees C, the melting temperature interval is 181 degrees C, and the permeability index is 507 kPa.degrees C. Titanium mainly enters the slag phase while hematite is gradually reduced to metallic iron. The study also finds that the slag phase consists primarily of spinel, silicates, and wustite, with a gradual decrease in FeO content during slag evolution.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Exploring selected pathways to low and zero CO2 emissions in China's iron and steel industry and their impacts on resources and energy

Shaohui Zhang et al.

Summary: This paper presents a study that used the MESSAGEix-China iron and steel model to explore pathways for achieving zero CO2 emissions in China's iron and steel industry. The study found that rapid adoption of scrap-based Electric Arc Furnaces (EAFs) and hydrogen-based Direct Reduced Iron (DRI)-EAFs steel-making technologies can significantly reduce CO2 emissions by 2060. However, carbon sink or negative emission technologies will still be needed to achieve carbon neutrality. The study also highlights the varying impacts of different technologies on material and energy consumption.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Chemistry, Physical

Use of Hydrogen-Rich Gas in Blast Furnace Ironmaking of V-bearing Titanomagnetite: Mass and Energy Balance Calculations

Xudong Gao et al.

Summary: This study establishes the operating window for smelting vanadium-bearing titanomagnetite in a blast furnace based on the energy and mass balance of the furnace. It calculates and analyzes the effects of injecting different amounts of hydrogen-rich gases on the adiabatic flame temperature and top gas temperature, as well as the influence of blast temperature and preheating temperature of the gases on the operating window. The study provides a theoretical reference for the practice of hydrogen-rich smelting in a blast furnace.

MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Smelting Vanadium-Titanium Magnetite by COREX Process: Effect of V-Ti Bearing Pellet Ratio on the Softening and Melting Behavior of Mixed Burden

Chen Yin et al.

Summary: The addition of V-Ti bearing pellet (VTP) under simulated COREX conditions affects the softening and melting behavior of slag by generating FeO.TiO2, leading to lower temperatures and promoting the burden dropping process, thereby weakening slag foaming.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2021)

添加到收藏夹

Article Crystallography

Preparation, Sintering Behavior and Consolidation Mechanism of Vanadium-Titanium Magnetite Pellets

Weibin Chen et al.

Summary: The use of bentonite as a binder for VTM pellets can improve their compressive and dropping strength, while roasting the pellets is essential for enhancing their metallurgical properties. The optimal roasting conditions are a calcination temperature of 1523 K and a calcination time of 20 minutes.

CRYSTALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Slag-foaming phenomenon originating from reaction of titanium-bearing blast furnace slag: Continuous monitoring of foaming height and calibration

Junyi Xiang et al.

Summary: This study demonstrated the feasibility and reliability of monitoring the foaming phenomenon originating from the reaction of titanium-bearing blast furnace slag using the current change in a circuit. The relationship between foaming height and current change was established through experiments at different levels of basicity and TiO2 content at high temperature.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Engineering, Chemical

Reduction behaviors of vanadium-titanium magnetite with H2 via a fluidized bed

Jianwen Yu et al.

Summary: A new efficient and clean utilization technique for vanadium-titanium magnetite based on fluidized bed hydrogen reduction was developed in this study. Experimental results showed that a high metallization degree could be obtained under specific conditions, and the aggregation of metallic iron grains into flakes was observed during the reduction process.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Preparing high-quality vanadium titano-magnetite pellets for large-scale blast furnaces as ironmaking burden

M. Gan et al.

IRONMAKING & STEELMAKING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Blast Furnace Ironmaking Process with Super-High TiO2 in the Slag: Viscosity and Melting Properties of the Slag

Zhengde Pang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2020)

添加到收藏夹

Article Engineering, Chemical

Influence of different comminution flowsheets on the separation of vanadium titano-magnetite

Xiaofei Guo et al.

MINERALS ENGINEERING (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Development and progress on hydrogen metallurgy

Jue Tang et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Softening–melting Properties and Slag Evolution Behavior of High Titanium Sinter

Kai Zhou et al.

ISIJ INTERNATIONAL (2020)

添加到收藏夹

Article Engineering, Chemical

Reduction behavior of vanadium-titanium magnetite carbon composite hot briquette in blast furnace process

Wei Zhao et al.

POWDER TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Increased Use of Natural Gas in Blast Furnace Ironmaking: Mass and Energy Balance Calculations

Megha Jampani et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Separation and recovery of iron and titanium from oxidized vanadium titano-magnetite by gas-based reduction roasting and magnetic separation

Yulei Sui et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermodynamic studies on gas-based reduction of vanadium titano-magnetite pellets

Jun-wei Chen et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Hydrogen Addition on Softening and Melting Reduction Behaviors of Ferrous Burden in Gas-Injection Blast Furnace

Yana Qie et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Gas-based reduction of vanadium titano-magnetite concentrate: behavior and mechanisms

Yu-lei Sui et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Non-isothermal reduction mechanism and kinetics of high chromium vanadium-titanium magnetite pellets

G. -J. Cheng et al.

IRONMAKING & STEELMAKING (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Prediction of Activities in Fe-Based Ternary Liquid Alloys by Hoch-Arpshofen Model

Yang Hong-wei et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2012)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Progress in Technologies of Vanadium-Bearing Titanomagnetite Smelting in PanGang

Wei Guo Fu et al.

STEEL RESEARCH INTERNATIONAL (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.