4.6 Article

High Cellulose Purity by Acid Hydrolysis Pretreatment on Kenaf Outer Bast

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Green & Sustainable Science & Technology

Nontraditional sources for biodiesel production in Malaysia: The economic evaluation of hemp, jatropha, and kenaf biodiesel

Kenneth R. Szulczyk et al.

Summary: The economic evaluation of using hemp, jatropha, and kenaf as feedstocks for biodiesel production in Malaysia shows that hemp and kenaf are economically feasible and sustainable, while jatropha is not economically viable without valuable coproducts. The production of hemp and kenaf biodiesel also has positive impacts on agricultural employment and carbon dioxide emissions reduction.

RENEWABLE ENERGY (2022)

Article Engineering, Chemical

A Cleaner Delignification of Urban Leaf Waste Biomass for Bioethanol Production, Optimised by Experimental Design

Gustavo Kildegaard et al.

Summary: This study focuses on optimizing the purification process of Platanus acerifolia leaf waste for second-bioethanol production. The results show that the highest lignin removal efficiency can exceed 80% by using low-temperature delignification with acetic acid and hydrogen peroxide. The process parameters, including reaction time, temperature, and solid loading, were optimized using experimental design. The optimized conditions point to using the minimum temperature in the examined range to maximize holocellulose yield. The analysis suggests that temperature has a negative influence on the solid fraction yield, while solid loading and time have a low effect on the degree of delignification. By working at a lower temperature, the holocellulose yield can reach 71% while improving energy efficiency.

PROCESSES (2022)

Article Chemistry, Multidisciplinary

Hot-Water Hemicellulose Extraction from Fruit Processing Residues

Marius Wolf et al.

Summary: The study demonstrates that extraction with subcritical water, followed by precipitation with alcohol, is an effective method to extract hemicelluloses from fruit residues with a purity of at least 90%. The extraction temperature and time have a trade-off relationship between yield and purity, while extract pH and alcohol concentration can further improve the purity of the extract.

ACS OMEGA (2022)

Article Agricultural Engineering

Enhancement of separation selectivity of hemicellulose from bamboo using freeze-thaw-assisted p-toluenesulfonic acid treatment at low acid concentration and high temperature

Meijiao Peng et al.

Summary: This study achieved efficient separation of bamboo hemicellulose through freeze-thaw-assisted p-TsOH treatment. Compared to conventional methods, better separation effect was achieved with significantly reduced yield of lignin. In addition, an increase in fiber crystallinity index and higher separation selectivity were observed.

BIORESOURCE TECHNOLOGY (2022)

Review Chemistry, Applied

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano) materials for sustainable water treatment: A review

Mahmoud Nasrollahzadeh et al.

Summary: Natural biopolymers, such as cellulose, chitin/chitosan, and starch, are considered greener, sustainable, and eco-friendly materials due to their outstanding structural features, abundant availability, nontoxicity, and biocompatibility. In recent years, polysaccharides have been widely used for making various catalysts, with polysaccharides-supported metal/metal oxide materials being an effective strategy in nanotechnology. Polysaccharides adorned with nanomaterials have shown promising potential as efficient catalysts or sorbents in removing a variety of aqueous pollutants and contaminants.

CARBOHYDRATE POLYMERS (2021)

Article Multidisciplinary Sciences

Developing fibrillated cellulose as a sustainable technological material

Tian Li et al.

Summary: Fibrillated cellulose, derived from renewable resources, has unique technological appeal and sustainability potential. Research demonstrates its wide applications in material fabrication, but challenges remain to be overcome.

NATURE (2021)

Article Polymer Science

Isolation and Characterization of Nanocrystalline Cellulose Isolated from Pineapple Crown Leaf Fiber Agricultural Wastes Using Acid Hydrolysis

Fitriani Fitriani et al.

Summary: The study demonstrates that pineapple crown leaf fiber can be processed into nanocrystalline cellulose with cellulose crystalline structure. The yield and thermal stability of the resulting NCC increase with hydrolysis time, showing potential for various applications.

POLYMERS (2021)

Article Biochemistry & Molecular Biology

Improved Hydrophobicity of Macroalgae Biopolymer Film Incorporated with Kenaf Derived CNF Using Silane Coupling Agent

Adeleke A. Oyekanmi et al.

Summary: The study reinforced carrageenan macroalgae biopolymer with cellulose nanofibrils from kenaf bast fibers, followed by treatment with silane for hydrophobic enhancement. The modified biofilms showed significantly improved strength, moisture resistance, and thermal stability compared to unmodified films, with the silane treatment further enhancing these properties. Good interfacial interaction was observed in the modified biopolymer films, which exhibited improved hydrophobic properties and potential for packaging applications.

MOLECULES (2021)

Article Polymer Science

Performance Evaluation of Cellulose Nanofiber with Residual Hemicellulose as a Nanofiller in Polypropylene-Based Nanocomposite

Mohd Nor Faiz Norrrahim et al.

Summary: The study evaluated the performance of CNF in the presence of hemicellulose as a reinforcement material in polypropylene nanocomposites. The results showed that the presence of some hemicellulose in CNF did not affect its properties as a reinforcement material, suggesting that complete hemicellulose removal may not be necessary for CNF preparation. This will lead to less harsh pretreatment and a more sustainable production of nanocomposites.

POLYMERS (2021)

Proceedings Paper Materials Science, Multidisciplinary

The effect of kenaf loading on the mechanical properties of kenaf-reinforced recycled poly(ethylene terephthalate)/recycled poly(propylene) (rPET/rPP) composite

Nur Hidayah Marzuki et al.

Summary: The mechanical properties of kenaf bast and core fiber reinforced rPET/rPP composite were investigated with varying fiber loading. Kenaf bast fiber composites demonstrated higher mechanical properties compared to core fiber composites, with the optimum fiber content at 5 phr for highest tensile properties. Additionally, an enhancement in impact strength was observed with the addition of 20 phr of fiber loading.

MATERIALS TODAY-PROCEEDINGS (2021)

Article Biotechnology & Applied Microbiology

Enzymatic production of 4-O-methyl d-glucaric acid from hardwood xylan

Thu V. Vuong et al.

BIOTECHNOLOGY FOR BIOFUELS (2020)

Article Physics, Atomic, Molecular & Chemical

A rapid-throughput adaptable method for determining the monosaccharide composition of polysaccharides

Matthew J. Amicucci et al.

INTERNATIONAL JOURNAL OF MASS SPECTROMETRY (2019)

Article Agricultural Engineering

Impact of chemical treatment on the physiochemical and mechanical properties of kenaf fibers

Aofei Guo et al.

INDUSTRIAL CROPS AND PRODUCTS (2019)

Article Chemistry, Multidisciplinary

Comparing the Physicochemical Properties of Upgraded Biomass Fuel by Torrefaction and the Ashless Technique

Lkhagvadorj Sh et al.

APPLIED SCIENCES-BASEL (2019)

Article Biotechnology & Applied Microbiology

Insight into the evolution of the proton concentration during autohydrolysis and dilute-acid hydrolysis of hemicellulose

Nuwan Sella Kapu et al.

BIOTECHNOLOGY FOR BIOFUELS (2016)

Review Construction & Building Technology

Mechanical properties of kenaf fibre reinforced polymer composite: A review

N. Saba et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Agricultural Engineering

Polypropylene biocomposites reinforced with softwood, abaca, jute, and kenaf fibers

A. K. Bledzki et al.

INDUSTRIAL CROPS AND PRODUCTS (2015)

Review Green & Sustainable Science & Technology

Potential of bioenergy production from industrial kenaf (Hibiscus cannabinus L.) based on Malaysian perspective

N. Saba et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Article Green & Sustainable Science & Technology

An irradiation-alkaline pretreatment of kenaf core for improving the sugar yield

Joon-Pyo Jeun et al.

RENEWABLE ENERGY (2015)

Article Green & Sustainable Science & Technology

Kinetic studies of two-stage sulphuric acid hydrolysis of sugarcane bagasse

Sachin Kumar et al.

RENEWABLE ENERGY (2015)

Proceedings Paper Energy & Fuels

Dilute Acid Pretreatment of Oil Palm Trunk Biomass at High Temperature for Enzymatic Hydrolysis

Pongsak Noparat et al.

2015 INTERNATIONAL CONFERENCE ON ALTERNATIVE ENERGY IN DEVELOPING COUNTRIES AND EMERGING ECONOMIES (2015)

Article Biotechnology & Applied Microbiology

Fast Hemicellulose Quantification Via a Simple One- Step Acid Hydrolysis

Xiadi Gao et al.

BIOTECHNOLOGY AND BIOENGINEERING (2014)

Article Agricultural Engineering

Effect of fiber extraction methods on some properties of kenaf bast fiber

B. Ahmed Amel et al.

INDUSTRIAL CROPS AND PRODUCTS (2013)

Article Agricultural Engineering

Acid hydrolysis of wheat straw: A kinetic study

Esther Guerra-Rodriguez et al.

BIOMASS & BIOENERGY (2012)

Article Engineering, Chemical

Kinetic studies on acid hydrolysis of Meranti wood sawdust for xylose production

I. S. M. Rafiqul et al.

CHEMICAL ENGINEERING SCIENCE (2012)

Article Green & Sustainable Science & Technology

Dilute sulfuric acid hydrolysis of tropical region biomass

I. P. Hernandez et al.

JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2012)

Article Materials Science, Textiles

Preparation of Pure Cellulose Nanofiber via Electrospinning

Kousaku Ohkawa et al.

TEXTILE RESEARCH JOURNAL (2009)