☆ 4.7 Article

Conjugate Heat Transfer Analysis for Cooling of a Conductive Panel by Combined Utilization of Nanoimpinging Jets and Double Rotating Cylinders

NANOMATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

MHD hybrid nanofluid convection and phase change process in an L-shaped vented cavity equipped with an inner rotating cylinder and PCM-packed bed system

Hana Ouri et al.

Summary: In this study, convective heat transfer and phase change process in an L-shaped vented cavity with an inner rotating cylinder and phase change material-packed bed (PCM-PB) system under a magnetic field were analyzed. Numerical simulations were conducted for different Reynolds numbers, rotational Reynolds numbers, cylinder sizes, and Hartmann numbers, with a 2% loading amount of hybrid Ag/MgO nanoparticles in water. The results showed that the vortex size and distribution could be controlled by varying the rotating cylinder size, rotational speed, and magnetic field. A larger cylinder size accelerated the phase change process, leading to a reduction of about 22% in the complete phase transition time and an increase of about 86% in the average Nusselt number at a rotational Reynolds number of -1000. The rotational direction of the cylinder had an impact on the phase transition dynamics, with a 27% increase in the complete phase transition time compared to the non-rotating cylinder case at a rotational Reynolds number of -1000. The magnetic field strength effectively suppressed the vortex, resulting in a faster phase change and a 26.5% increase in the average Nusselt number at a rotational Reynolds number of -1000. ANFIS-based modeling was used to investigate the effects of the rotating cylinder on the phase change dynamics in the L-shaped vented cavity.

ALEXANDRIA ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental study on the thermophysical properties, heat transfer, thermal entropy generation and exergy efficiency of turbulent flow of ZrO2-water nanofluids

L. Syam Sundar

Summary: This experimental study investigates the thermophysical properties, heat transfer coefficient, thermal entropy generation, frictional entropy generation, and exergy efficiency of ZrO2/DI-water nanofluids circulating through a tube under turbulent flow. The results show that at a 1.0% vol. loading of nanofluid, the thermal conductivity increases by 24.96% at 60 degrees C, while the viscosity increases by 45.57% at 20 degrees C compared to the base fluid. Additionally, the heat transfer coefficient and Nusselt number of the 1.0% vol. nanofluid increase by 46.30% and 31.65% respectively, with a penalty in friction factor of 19.21% and pumping power penalty of 13.91% at a Reynolds number of 14575, compared to water. The thermal entropy generation is reduced by 31.65% and the frictional entropy generation is increased by 19.2% at the 1.0% vol. nanofluid and Reynolds number of 14575. The exergy efficiency is also enhanced by 24.42% at the 1.0% vol. and Reynolds number of 14575. Overall, the thermal performance factor of ZrO2 nanofluids is 1.242 times larger than that of water, indicating their beneficial heat transfer properties.

ALEXANDRIA ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental and numerical investigation for PV cooling by forced convection

Ahmed Hussien et al.

Summary: PV panels are cooled by forced convection using different cooling methods, including small backside fans and blowers. Computational fluid dynamics (CFD) is used to analyze the cooling airflow characteristics and panel temperature distribution. Experimental measurements show that using small backside fans can significantly enhance the performance of PV panels with a maximum total increase of 2.1% in efficiency and 7.9% energy saving.

ALEXANDRIA ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Entropy generation analysis and simulation of turbulent forced convection around tube with integral wake splitter using artificial neural network approach

Moustafa A. El Bouz et al.

Summary: This study investigates entropy generation characteristics around a circular plain tube with integral downstream splitter plates in a rectangular duct. The results show that the addition of the plate reduces entropy generation, with the entropy generation number being more sensitive to the Reynolds number as plate length increases. The use of the artificial neural network (ANN) algorithm provides accurate predictions for entropy generation without the need for extra experiments or solving nonlinear mathematical models.

ALEXANDRIA ENGINEERING JOURNAL (2023)

添加到收藏夹

Article Thermodynamics

Thermal management for conjugate heat transfer of curved solid conductive panel coupled with different cooling systems using non-Newtonian power law nanofluid applicable to photovoltaic panel systems

Fatih Selimefendigil et al.

Summary: The thermal performance features of a coupled conjugate thermo-fluid system with different cooling configurations were explored using non-Newtonian nanofluid. Different system parameters, such as Reynolds numbers, power-law index, height, corrugation number, and jet distance, were studied to understand their effects on the thermal performance. The use of different nanoparticles and fluid parameters in various configurations resulted in different impacts on the thermal performance.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Investigation of super-critical water-based nanofluid with different nanoparticles (shapes and types) used in the rectangular corrugated tube of reactors

H. Behzadnia et al.

Summary: This paper numerically investigates the use of an optimized rectangular corrugated tube for cooling in a super-critical water reactor (SCWR), considering the effects of Al2O3, CuO, Fe3O4, and TiO2 nanoparticles on heat transfer. The study found that a corrugated tube filled with spherical alumina-SCW showed the best cooling performance.

ALEXANDRIA ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Impacts of rotating surface and area expansion during nanofluid convection on phase change dynamics for PCM packed bed installed cylinder

Kaouther Ghachem et al.

Summary: This study investigates the phase change dynamics of hybrid nanofluid in a phase change packed bed with rotational surface effects, area expansion, and nanoparticle loading. Results show that higher rotational Reynolds number and nanoparticle concentration accelerate the phase change process, while the effects become reverse in the presence of rotations.

ALEXANDRIA ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Enhancing trays solar still performance using wick finned absorber, nano- enhanced PCM

A. S. Abdullah et al.

Summary: This study aims to enhance the performance of tray solar stills (TSS) by improving the absorber shape and utilizing phase change materials. The addition of electric heaters and photovoltaic cells further increases the water productivity. Experimental results show a significant improvement in the efficiency of solar stills with these enhancements.

ALEXANDRIA ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Mixed convection heat transfer utilizing Nanofluids, ionic Nanofluids, and hybrid nanofluids in a horizontal tube

Ahmed H. Abdelaziz et al.

Alexandria Engineering Journal (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

An overview on energy and exergy analysis of solar thermal collectors with passive performance enhancers

M. Murugan et al.

Alexandria Engineering Journal (2022)

添加到收藏夹

Article Thermodynamics

Performance evaluation of PV cells in HCPV/T system by a jet impingement/mini-channel cooling scheme

A. Torbatinezhad et al.

Summary: This investigation conducted a numerical analysis of a cooling system for a solar panel in a concentration photovoltaic system. The results show that the application of a heat sink enhanced with pin fins improves heat transfer characteristics, increases electrical efficiency, and reduces heat sink temperature with increasing fins angle.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Thermoelectric generation from vented cavities with a rotating conic object and highly conductive CNT nanofluids for renewable energy systems

Fatih Selimefendigil et al.

Summary: This study investigates thermoelectric power generation using a rotating conic object and carbon-nanotube particles in a cavity with ventilation ports. Factors such as rotational speed, object size, and nanoparticle volume fraction significantly affect power generation. A predictive model based on fluid flow Reynolds numbers and rotational Reynolds number delivers accurate predictions for power output.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Mathematics

Jet Impingement Cooling of a Rotating Hot Circular Cylinder with Hybrid Nanofluid under Multiple Magnetic Field Effects

Badreddine Ayadi et al.

Summary: The study numerically evaluated the cooling performance of jet impinging hybrid nanofluid on a rotating hot circular cylinder under the influence of multiple magnetic fields using the finite element method. It was found that the rotation of the cylinder significantly affected heat transfer, while variations in magnetic field strength led to changes in the average Nu value. The distance between jets and size of the cylinder were important factors in flow dynamics and heat transfer performance.

MATHEMATICS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Thermal convection of nano-liquid in an electronic cabinet with finned heat sink and heat generating element

M. A. Sheremet et al.

Summary: This research simulated free convection of alumina nanoliquid to study the influences of energy transport and flow structures, finding that increasing the fins height and particles concentration can enhance heat removal from the heated source.

ALEXANDRIA ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Nanofluid: Potential evaluation in automotive radiator

Farrukh Abbas et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

添加到收藏夹

Article Thermodynamics

Experimental study for the application of different cooling techniques in photovoltaic (PV) panels

Fatih Bayrak et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Free convection effect on oscillatory flow using artificial neural networks and statistical techniques

S. M. Abo-Dahab et al.

ALEXANDRIA ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Thermodynamics

Fluid-structure interaction analysis of entropy generation and mixed convection inside a cavity with flexible right wall and heated rotating cylinder

A. I. Alsabery et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Effects of temperature-dependent properties on natural convection of power-law nanofluids in rectangular cavities with sinusoidal temperature distribution

Lei Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Airfoil shaped pin-fin heat sink: Potential evaluation of ferric oxide and titania nanofluids

Hamza Babar et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Thermodynamics

Analysis and predictive modeling of nanofluid-jet impingement cooling of an isothermal surface under the influence of a rotating cylinder

Fatih Selimefendigil et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Enhanced thermophysical properties of multiwalled carbon nanotubes based nanofluids. Part 1: Critical review

Hessam Taherian et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Applications of nanofluids in solar energy: A review of recent advances

A. H. Elsheikh et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Efficiency improvement of solar photovoltaic/solar air collectors by using impingement jets: A review

Rahul Nadda et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Carbon nanotube nanofluid in enhancing the efficiency of evacuated tube solar collector

I. M. Mahbubul et al.

RENEWABLE ENERGY (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review on the applications of nanofluids in solar energy field

Khalil Khanafer et al.

RENEWABLE ENERGY (2018)

添加到收藏夹

Article Thermodynamics

Experimental investigation of free single jet impingement using SiO2-watet nanofluid

Jizu Lv et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)

添加到收藏夹

Article Thermodynamics

Magnetic field effect on the enhancement of nanofluids heat transfer of a confined jet impingement in mini-channel heat sink

Lersak Nakharintr et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Thermodynamics

Mixed convection heat transfer of turbulent flow in a three-dimensional lid-driven cavity with a rotating cylinder

Ali Khaleel Kareem et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Thermodynamics

Effects of wavy surface characteristics on natural convection heat transfer in a cosine corrugated square cavity filled with nanofluid

Kamel Milani Shirvan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Energy & Fuels

Thermal management of conventional PV panel using PCM with movable shutters - A numerical study

Adeel Waqas et al.

SOLAR ENERGY (2017)

添加到收藏夹

Article Energy & Fuels

Experimental investigation of jet array nanofluids impingement in photovoltaic/thermal collector

Husam Abdulrasool Hasan et al.

SOLAR ENERGY (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

Uniform cooling of photovoltaic panels: A review

Haitham M. S. Bahaidarah et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Increasing the efficiency of PV panel with the use of PCM

Rok Stropnik et al.

RENEWABLE ENERGY (2016)

添加到收藏夹

Review Energy & Fuels

Global advancement of cooling technologies for PV systems: A review

M. Hasanuzzaman et al.

SOLAR ENERGY (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Mathematical modeling of entropy generation in magnetized micropolar flow between co-rotating cylinders with internal heat generation

Srinivas Jangili et al.

ALEXANDRIA ENGINEERING JOURNAL (2016)

添加到收藏夹

Article Energy & Fuels

Experimental test of an innovative high concentration nanofluid solar collector

Gianpiero Colangelo et al.

APPLIED ENERGY (2015)

添加到收藏夹

Article Thermodynamics

Progress of nanofluid application in solar collectors: A review

Sujit Kumar Verma et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

添加到收藏夹

Review Thermodynamics

Applications of artificial neural networks for thermal analysis of heat exchangers - A review

M. Mohanraj et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)

添加到收藏夹

Article Thermodynamics

LES simulations of an impinging jet: On the origin of the second peak in the Nusselt number distribution

Naseem Uddin et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

添加到收藏夹

Article Thermodynamics

Effect of rotating cylinder on heat transfer in a square enclosure filled with nanofluids

R. Roslan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

添加到收藏夹

Article Construction & Building Technology

A heat pipe photovoltaic/thermal (PV/T) hybrid system and its performance evaluation

Shuang-Ying Wu et al.

ENERGY AND BUILDINGS (2011)

添加到收藏夹

Article Energy & Fuels

Effect of a hybrid jet impingement/micro-channel cooling device on the performance of densely packed PV cells under high concentration

Jerome Barrau et al.

SOLAR ENERGY (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Numerical study of a confined slot impinging jet with nanofluids

Oronzio Manca et al.

NANOSCALE RESEARCH LETTERS (2011)

添加到收藏夹

Article Thermodynamics

Steady mixed convection in a differentially heated square enclosure with an active rotating circular cylinder

V. A. F. Costa et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

添加到收藏夹

Article Thermodynamics

The role of jet inlet geometry in impinging jet heat transfer, modeling and experiments

M. F. Koseoglu et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)

添加到收藏夹

Review Thermodynamics

Review of convective heat transfer enhancement with nanofluids

Sadik Kakac et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

添加到收藏夹

Article Physics, Applied

Particle shape effects on thermophysical properties of alumina nanofluids

Elena V. Timofeeva et al.

JOURNAL OF APPLIED PHYSICS (2009)

添加到收藏夹

Article Energy & Fuels

Performance analysis of a photovoltaic heat pump

Ji Jie et al.

APPLIED ENERGY (2008)

添加到收藏夹

Article Thermodynamics

A numerical study of the unsteady flow and heat transfer in a transitional confined slot jet impinging on an isothermal surface

VA Chiriac et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.