4.7 Article

Mechanochemical Synthesis of Sustainable Ternary and Quaternary Nanostructured Cu2SnS3, Cu2ZnSnS4, and Cu2ZnSnSe4 Chalcogenides for Thermoelectric Applications

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Thermoelectric performance in disordered Cu2ZnSnSe4 nanostructures driven by ultra-low thermal conductivity

Binayak Mukherjee et al.

Summary: High-energy reactive mechanical alloying was used to synthesize tetragonal and cubic polymorphs of Cu2ZnSnSe4, which exhibit ultra-low thermal conductivities. The cubic polymorph has a higher zT value in the low-temperature range, while the tetragonal polymorph has the highest zT value at high temperatures.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Article Chemistry, Physical

Effects of Preparation Procedures and Porosity on Thermoelectric Bulk Samples of Cu2SnS3 (CTS)

Ketan Lohani et al.

Summary: This study investigates the thermoelectric behavior and stability of Cu2SnS3 (CTS) and reveals the influence of preparation and sintering conditions on material properties. Different preparations of CTS samples show similar electrical transport characteristics, but sintering conditions significantly affect the thermal conductivity and thermoelectric performance of the material.

MATERIALS (2022)

Article Chemistry, Multidisciplinary

Static and dynamic components of Debye-Waller coefficients in the novel cubic polymorph of low-temperature disordered Cu2ZnSnS4

Eleonora Isotta et al.

Summary: Cu2ZnSnS4 (CZTS) is a promising material for sustainable photovoltaics and thermoelectrics due to its polymorphism. The disorder cubic polymorph is preserved below 663 K and transforms into the tetragonal kesterite phase with thermal treatments above 663 K. The stacking arrangement and Debye-Waller coefficients play important roles in understanding the disorder and its effect on transport properties.
Article Chemistry, Multidisciplinary

Towards Low Cost and Sustainable Thin Film Thermoelectric Devices Based on Quaternary Chalcogenides

Eleonora Isotta et al.

Summary: Thin film thermoelectric devices based on sustainable and non-toxic materials show promising performance and significantly outperform traditional thermoelectrics in terms of power density and cost. This represents a first step towards the development of sustainable and cost-effective thin film TE devices for various applications.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Materials Science, Multidisciplinary

Mechanochemical synthesis of γ-CoTe2 nanocrystals and their application for determination of ferulic acid

Marcelo Augusto Malagutti et al.

Summary: In this study, gamma-CoTe2 nanocrystals were successfully synthesized using a ball mill within a short time. The nanocrystals exhibited excellent sensing abilities for ferulic acid, making them a promising alternative for quality control and real-time analysis in cosmetic industry.

MATERIALS TODAY COMMUNICATIONS (2022)

Article Chemistry, Physical

Facile and Low-Cost Fabrication of Cu/Zn/Sn-Based Ternary and Quaternary Chalcogenides Thermoelectric Generators

Ubaidah Syafiq et al.

Summary: In this work, Cu/Zn/Sn-based ternary and quaternary chalcogenides inks were synthesized for the fabrication of thermoelectric generators (TEGs) using safe, low-cost, and abundant materials. The chalcogenide and AZO thin films were successfully coupled in a p-n device, with the CZTSe/AZO TEG exhibiting the highest power output. Factors affecting TEG performance, including composition, density, and secondary phases in the chalcogenide thin films, were investigated.

ACS APPLIED ENERGY MATERIALS (2022)

Article Chemistry, Physical

Polymorphic Control of Solution-Processed Cu2SnS3 Films with Thiol-Amine Ink Formulation

Kristopher M. Koskela et al.

Summary: This study reports the ability to dissolve Cu2S and SnO precursors in thiol-amine solvent mixtures to generate molecular inks. Polymorphic control over Cu2SnS3 films was achieved by simply switching the thiol identity. The control of polymorphism is determined by the differences in the resulting molecular metal-thiolate complexes and their decomposition profiles.

CHEMISTRY OF MATERIALS (2022)

Article Chemistry, Multidisciplinary

Polymorphism of the Co-Te nanophases in mechanochemical synthesis

Marcelo Augusto Malagutti et al.

Summary: The study demonstrates the mechanochemical synthesis of all cobalt tellurides' phases and characterizes their structural, microstructural, and magnetic properties. Different cobalt telluride phases with varying weight proportions were synthesized, with sizes in the range of tens of nanometers. The research also showed that the phases exhibit stable structural and microstructural properties over a two-year storage period.

RSC ADVANCES (2022)

Article Chemistry, Inorganic & Nuclear

Suppressing the secondary phases via N2 preheating of Cu2ZnSnS4 thin films with the addition of oleylamine and/or 1-Dodecanethiol solvents

Hassan Ahmoum et al.

Summary: This study investigates the impact of solvent addition on CZTS photovoltaic thin films. Through analyses including XRD, Raman spectroscopy, and electrical characteristics, it was found that the sulfur/OLA/1-DDT sample exhibited superior properties compared to other materials in surface morphology, crystallite size, and charge carrier concentration, showing promise for effective absorber thin films for photovoltaic applications.

INORGANIC CHEMISTRY COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Thermoelectric Cu-S-Based Materials Synthesized via a Scalable Mechanochemical Process

Peter Balaz et al.

Summary: This work demonstrates the scalability of synthesis of Cu-based sulfides using industrial milling and compares the efficiency with laboratory-scale methods. The spark plasma sintering method is utilized to prepare samples for thermoelectric characterization, showing similar ZT values as compared to laboratory methods. The environmentally friendly mechanochemical synthesis offers a sustainable approach in solid-state chemistry for large-scale deployment of energy-related materials.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Physical

Porous Thermoelectric Zintl: YbCd2Sb2

Jianghe Feng et al.

Summary: By employing controllable annealing, this study successfully achieved a porous structure in the YbCd2Sb2 Zintl compound, reducing lattice thermal conductivity while maintaining electrical conductivity, enhancing thermoelectric performance, with the highest figure of merit reached at 673K. It shows great potential for practical applications.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Ternary Cu2SnS3: Synthesis, Structure, Photoelectrochemical Activity, and Heterojunction Band Offset and Alignment

Sagar B. Jathar et al.

Summary: Ternary Cu2SnS3 (CTS) is an attractive non-toxic absorber material with suitable optoelectronic properties. High-quality CTS nanoparticles (NPs) were successfully synthesized using a low-cost hot injection route. The CTS photocathode shows excellent photoelectrochemical properties, and CdS is a better photoanode material to form a heterojunction with CTS for enhanced PEC activity.

CHEMISTRY OF MATERIALS (2021)

Article Chemistry, Inorganic & Nuclear

Enhanced Power Factor and Figure of Merit of Cu2ZnSnSe4-Based Thermoelectric Composites by Ag Alloying

Fahad Mehmood et al.

Summary: The quaternary chalcogenide composites Cu2ZnSn1-xAgxSe4 have been synthesized successfully, with the replacement of Sn by Ag significantly enhancing electrical transport properties and reducing thermal conductivity. The maximum figure of merit of zT = 0.25 was achieved at 673K.

INORGANIC CHEMISTRY (2021)

Review Chemistry, Multidisciplinary

Sustainability Assessment of Mechanochemistry by Using the Twelve Principles of Green Chemistry

Karen J. Ardila-Fierro et al.

Summary: Mechanochemistry has become a widely accepted alternative for chemical synthesis due to its efficiency, practicality, and sustainability, satisfying multiple Principles of Green Chemistry.

CHEMSUSCHEM (2021)

Article Chemistry, Multidisciplinary

Topological Anderson Insulator in Cation-Disordered Cu2ZnSnS4

Binayak Mukherjee et al.

Summary: This study introduces a candidate material for realizing a disorder-induced Topological Anderson Insulator in a real material system, demonstrating the potential for a novel topological phase in a easily-synthesized multinary, disordered compounds.

NANOMATERIALS (2021)

Article Chemistry, Physical

Effects of Grain Size on the Thermoelectric Properties of Cu2SnS3: An Experimental and First-Principles Study

Ketan Lohani et al.

Summary: Cu-Sn-based sulfides, such as Cu2SnS3, show potential for low-cost energy harvesting applications. The study reveals that decreasing grain size results in lower resistivity and higher thermal conductivity, leading to a significant enhancement of thermoelectric performance.

ACS APPLIED ENERGY MATERIALS (2021)

Article Materials Science, Multidisciplinary

Enhanced thermoelectric performance in polymorphic heavily Co-doped Cu2SnS3 through carrier compensation by Sb substitution

Yaqing Zhao et al.

Summary: By doping Sb at the Sn site in Cu2Sn0.8Co0.2S3, the Seebeck coefficient can be effectively enhanced, the electronic thermal conductivity reduced, and a peak ZT of approximately 0.88 at 773 K achieved.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2021)

Article Materials Science, Multidisciplinary

Role of defect density in absorber layer of ternary chalcogenide Cu2SnS3 solar cell

A. S. Mathur et al.

Summary: The study evaluated the photovoltaic performance of ternary chalcogenide Cu2SnS3 (CTS) solar cells, and found that an increase in defect density degrades the cell performance.

OPTICAL MATERIALS (2021)

Article Chemistry, Physical

Phase Composition Manipulation and Twin Boundary Engineering Lead to Enhanced Thermoelectric Performance of Cu2SnS3

Yiqing Wei et al.

Summary: Undoped and In-doped CTS nanoparticles with a pure tetragonal phase were successfully synthesized, with plenty of twin boundaries observed in samples sintered from the nanoparticles. These twin boundaries effectively reduce the lattice thermal conductivity, while the tetragonal phase improves the electrical performance of CTS.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Remarkable thermoelectric property enhancement in Cu2SnS3-CuCo2S4 nanocomposites via 3D modulation doping

Yan Gu et al.

Summary: This study reports a remarkable enhancement in thermoelectric properties of a Cu2SnS3-based nanocomposite material by incorporating CuCo2S4, achieving high power factor and suppressed lattice thermal conductivity. The hetero-structure shows significant improvement in carrier concentration and maintenance of high carrier mobility, contributing to an increased ZT value at 773K.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Physical

Environmentally friendly thermoelectric sulphide Cu2ZnSnS4 single crystals achieving a 1.6 dimensionless figure of merit ZT

Akira Nagaoka et al.

Summary: Thermoelectrics (TEs) are an important class of technology that can directly harvest electric power from heat sources. The use of a pseudo-cubic structure in TE materials can maximize the dimensionless figure of merit ZT, leading to high performance and environmentally friendly materials. A record high ZT of 1.6 around 800 K was achieved in a environmentally benign p-type Na-doped Cu2ZnSnS4 (CZTS) single crystal, demonstrating exceptional performance due to a high power factor and low thermal conductivity.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Physical

Thermoelectric properties of CZTS thin films: effect of Cu-Zn disorder

E. Isotta et al.

Summary: The study explores the impact of Cu-Zn disorder on the thermoelectric properties of thin film CZTS. It finds that disorder enhances electrical conductivity and Seebeck coefficient, potentially improving thermoelectric performance. The order-disorder transition in electronic properties can be quantified through electronic measurements, and the reversible transition allows for tuning electronic properties via specific thermal treatments.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2021)

Article Chemistry, Multidisciplinary

Improving the thermoelectric performance of Cu2SnSe3 via regulating micro- and electronic structures

Hongwei Ming et al.

Summary: Through mechanical milling, the electrical conductivity, thermopower, and lattice thermal conductivity of Cu2SnSe3 material can be significantly improved, mainly due to the generated Sn vacancies, Se dangling bonds, and reconstructed acceptor-like surface states. The generated Sn vacancies and in situ formed SnO2 nanoparticles also lead to reduced thermal conductivity due to strong phonon scattering.

NANOSCALE (2021)

Article Chemistry, Multidisciplinary

Structural, microstructural and magnetic characterization of the β-CoTe nanophase synthesized by a novel mechanochemical method

Marcelo Augusto Malagutti et al.

Summary: This work successfully synthesized beta-CoTe using an unprecedented mechanochemistry method and systematically characterized it through techniques such as X-ray powder diffraction, transmission electron microscopy, and magnetometry. The material has crystallites with an average size of around 13 nm and a microstrain of 1.1%, exhibiting a triaxial ellipsoid shape. The magnetization analysis showed that beta-CoTe is predominantly superparamagnetic with a magnetic domain size compatible with the double-Voigt model.

RSC ADVANCES (2021)

Article Chemistry, Physical

Vacancy cluster-induced local disordered structure for the enhancement of thermoelectric property in Cu2ZnSnSe4

Zhou Li et al.

Summary: The study highlights the vacancy cluster-induced local disordered structure in Cu2ZnSnSe4, achieving low thermal conductivity and high electrical conductivity. Proper vacancy modulation opens up a new avenue to tackle the entanglement of thermoelectric parameters.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Energy & Fuels

Progress in CZTS as hole transport layer in perovskite solar cell

Ubaidah Syafiq et al.

SOLAR ENERGY (2020)

Article Physics, Applied

Magnetic iron doping in Cu2SnS3 ceramics for enhanced thermoelectric transport properties

Lei Zhao et al.

JOURNAL OF APPLIED PHYSICS (2019)

Article Materials Science, Multidisciplinary

Control of composition and grain growth in Cu2ZnSnS4 thin films from nanoparticle inks

Narges Ataollahi et al.

THIN SOLID FILMS (2019)

Article Chemistry, Physical

Role of crystal transformation on the enhanced thermoelectric performance in Mn-doped Cu2SnS3

Zhen Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Materials Science, Characterization & Testing

Nanostructured kesterite (Cu2ZnSnS4) for applications in thermoelectric devices

E. Isotta et al.

POWDER DIFFRACTION (2019)

Article Biochemistry & Molecular Biology

Solution-Based Synthesis and Characterization of Cu2ZnSnS4 (CZTS) Thin Films

Ubaidah Syafiq et al.

MOLECULES (2019)

Article Physics, Applied

Thermoelectric properties of non-stoichiometric Cu2+xSn1-xS3 compounds

Tingting Deng et al.

JOURNAL OF APPLIED PHYSICS (2019)

Article Energy & Fuels

Thermoelectric harvesters and the internet of things: technological and economic drivers

Dario Narducci

JOURNAL OF PHYSICS-ENERGY (2019)

Article Chemistry, Multidisciplinary

Grain boundary dominated charge transport in Mg3Sb2-based compounds

Jimmy Jiahong Kuo et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Multidisciplinary

Whole powder pattern modelling macros for TOPAS

Paolo Scardi et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2018)

Review Chemistry, Multidisciplinary

Bottom up, solid-phase syntheses of inorganic nanomaterials by mechanochemistry and aging

Audrey Moores

CURRENT OPINION IN GREEN AND SUSTAINABLE CHEMISTRY (2018)

Article Chemistry, Physical

Synergistic role of Ni-doping in electrical and phonon transport properties of Cu2Sn1-xNixS3

Xiaoxuan Xu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Chemistry, Physical

Room temperature liquefied petroleum gas sensing using Cu2SnS3/CdS heterojunction

A. C. Lokhande et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Article Chemistry, Physical

Enhanced thermoelectric properties of earth-abundant Cu2SnS3 via In doping effect

Qing Tan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Article Materials Science, Multidisciplinary

Evaluation of energy filtering effect from first principles calculations

Xi Zhao et al.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2016)

Article Multidisciplinary Sciences

Eco-friendly p-type Cu2SnS3 thermoelectric material: crystal structure and transport properties

Yawei Shen et al.

SCIENTIFIC REPORTS (2016)

Article Chemistry, Physical

Enhanced thermoelectric properties of Cu2ZnSnSe4 with Ga-doping

Kaya Wei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Article Nanoscience & Nanotechnology

First principles phonon calculations in materials science

Atsushi Togo et al.

SCRIPTA MATERIALIA (2015)

Article Physics, Applied

Entropy-Driven Clustering in Tetrahedrally Bonded Multinary Materials

Pawel Zawadzki et al.

PHYSICAL REVIEW APPLIED (2015)

Article Materials Science, Multidisciplinary

Synthesis and thermoelectric properties of Cu excess Cu2ZnSnSe4

Yongkwan Dong et al.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2014)

Article Chemistry, Multidisciplinary

Magnetic ions in wide band gap semiconductor nanocrystals for optimized thermoelectric properties

Chong Xiao et al.

MATERIALS HORIZONS (2014)

Article Chemistry, Multidisciplinary

Lone pair electrons minimize lattice thermal conductivity

Michele D. Nielsen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Article Nanoscience & Nanotechnology

Thermoelectric properties of chalcogenide based Cu2+xZnSn1-xSe4

Ch Raju et al.

AIP ADVANCES (2013)

Article Multidisciplinary Sciences

High-performance bulk thermoelectrics with all-scale hierarchical architectures

Kanishka Biswas et al.

NATURE (2012)

Article Chemistry, Physical

Kesterite Thin-Film Solar Cells: Advances in Materials Modelling of Cu2ZnSnS4

Aron Walsh et al.

ADVANCED ENERGY MATERIALS (2012)

Article Chemistry, Multidisciplinary

Multiple-Filled Skutterudites: High Thermoelectric Figure of Merit through Separately Optimizing Electrical and Thermal Transports

Xun Shi et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Article Energy & Fuels

Effect of Cu/(Zn plus Sn) ratio on the properties of co-evaporated Cu2ZnSnSe4 thin films

Suresh G. Babu et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)

Article Energy & Fuels

Cu2ZnSnSe4 in Film Solar Cells Produced by Selenisation of Magnetron Sputtered Precursors

G. Zoppi et al.

PROGRESS IN PHOTOVOLTAICS (2009)

Article Chemistry, Physical

Porous Thermoelectric Materials

Hiroshi Julian Goldsmid

MATERIALS (2009)

Software Review Chemistry, Multidisciplinary

VESTA:: a three-dimensional visualization system for electronic and structural analysis

Koichi Momma et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2008)

Review Chemistry, Physical

Complex thermoelectric materials

G. Jeffrey Snyder et al.

NATURE MATERIALS (2008)

Article Chemistry, Physical

Hybrid functionals based on a screened Coulomb potential

J Heyd et al.

JOURNAL OF CHEMICAL PHYSICS (2003)

Article Chemistry, Multidisciplinary

Whole powder pattern modelling

P Scardi et al.

ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES (2002)