4.7 Article

Atom-to-Device Simulation of MoO3/Si Heterojunction Solar Cell

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

MoO3 doped PTAA for high-performance inverted perovskite solar cells

Chenyue Wang et al.

Summary: This study successfully improved the performance of planar perovskite solar cells by doping poly[bis(4-phenyl)(2,4,6-triMethylphenyl)aMine] (PTAA) with 3 wt% molybdenum oxide (MoO3), resulting in better hole transport efficiency and extraction at the PTAA/perovskite interface. The power conversion efficiency of the fabricated PSCs using MoO3-doped PTAA HTL reached 20.06%, compared to 17.71% with pristine PTAA HTL, demonstrating the potential of MoO3 as a dopant for enhancing HTLs in high-performance PSCs and other perovskite-based optoelectronics.

APPLIED SURFACE SCIENCE (2022)

Article Chemistry, Multidisciplinary

Enhanced Efficiency of Semitransparent Perovskite Solar Cells via Double-Sided Sandwich Evaporation Technique for Four Terminal Perovskite-Silicon Tandem Application

Jia-Ci Jhou et al.

Summary: Halide perovskite based solar cells have shown great potential due to their easy fabrication technique and low cost. The quality and crystallinity of the perovskite film play a crucial role in the efficiency and performance of the solar cell. Semitransparent perovskite solar cells have attracted attention for their application in tandem solar cells, but face challenges in transparent rear electrodes and optimization techniques. This study fabricates high quality perovskite films using a double-sided sandwich evaporation technique and demonstrates improved photovoltaic performance compared to the traditional spin-coating method.

NANOMATERIALS (2022)

Review Nanoscience & Nanotechnology

Status and perspectives of crystalline silicon photovoltaics in research and industry

Christophe Ballif et al.

Summary: This paper reviews the recent evolution of crystalline silicon solar cells, analyzes the current status of research and industrial development, and looks into the future prospects. The improvements in materials and processing have greatly reduced the cost and increased the efficiency of crystalline silicon photovoltaics, making it an important low-cost source of electricity. The paper also discusses the challenges and requirements for other photovoltaic technologies to compete with silicon on the mass market.

NATURE REVIEWS MATERIALS (2022)

Article Physics, Condensed Matter

Effect of the Thickness on Photoelectric Parameters of a Textured Silicon Solar Cell

J. Gulomov et al.

Summary: The efficiency of solar cells depends on their thickness. This study investigates the relationship between the photoelectric parameters of solar cells and their thickness. The experiment compares silicon solar cells with different pyramidal textures and finds that a textured silicon solar cell with a 70.4-degree angle at its base can reach a maximum efficiency of 21% at a thickness of 190 μm. A solar cell with a 70.4-degree texture and a thickness of 40 μm can achieve 19.56% efficiency compared to a textured silicon solar cell with a 54-degree angle and a thickness of 250 μm. This suggests that using a 70.4-degree angle texture can significantly reduce the cost of silicon solar cells.

JOURNAL OF SURFACE INVESTIGATION (2022)

Article Chemistry, Multidisciplinary

Silicon-Based Metastructure Optical Scattering Multiply-Accumulate Computation Chip

Xu Liu et al.

Summary: Optical neural networks (ONN) offer a promising solution to replace electronic neural networks, with the potential to achieve better performance optoelectronic hybrid devices on silicon-based photonic platforms. By optimizing the topology of CWDM and OSU, arbitrary multiply-accumulate (MAC) operations can be achieved, providing the core foundation for scattering ONN architecture.

NANOMATERIALS (2022)

Article Chemistry, Multidisciplinary

Sputtered Ultrathin TiO2 as Electron Transport Layer in Silicon Heterojunction Solar Cell Technology

Susana Fernandez et al.

Summary: This study presents the implementation of ultrathin TiO2 films deposited by radio-frequency magnetron sputtering at room temperature as electron-selective contacts in silicon heterojunction solar cells. The effect of working pressure and film thicknesses on the device performance is investigated. The results show that film thicknesses below 2 nm are necessary for achieving high open-circuit voltage, and the fill-factor is strongly dependent on the deposition pressure. The study demonstrates the potential for fabricating silicon solar cells with a simple implementation of electron-selective TiO2 contact deposition by magnetron sputtering.

NANOMATERIALS (2022)

Article Chemistry, Multidisciplinary

Geometric Optimization of Perovskite Solar Cells with Metal Oxide Charge Transport Layers

Jasurbek Gulomov et al.

Summary: In this paper, the effect of layer thickness on the photoelectric parameters of n-ZnO/p-CH3NH3PbI3/p-NiOx solar cell was investigated through simulations. The optimal thicknesses of the perovskite layer, electronic transport layer (ETL), and hole transport layer (HTL) were identified, resulting in improved efficiency. The findings contribute to the design and manufacturing of perovskite solar cells as a promising alternative to silicon PV.

NANOMATERIALS (2022)

Article Chemistry, Multidisciplinary

Enhancing the Efficiency of Perovskite Solar Cells through Interface Engineering with MoS2 Quantum Dots

Zhao Luo et al.

Summary: In this study, the interface of perovskite solar cells was improved by using MoS2 quantum dots, resulting in an increased power conversion efficiency. The MoS2 quantum dots not only facilitated hole collection but also prevented the flow of photogenerated electrons to the hole transport layer.

NANOMATERIALS (2022)

Article Chemistry, Multidisciplinary

Influence of the Al-Doped ZnO Sputter-Deposition Temperature on Cu(In,Ga)Se2 Solar Cell Performance

Hyeonwook Park et al.

Summary: This study analyzed the microstructure and performance of Al-doped zinc oxide (AZO) films fabricated by magnetron sputtering and their effects on different types of CIGS solar cells. The results showed a correlation between the characteristics of CIGS absorber and the deposition temperature of the AZO layer.

NANOMATERIALS (2022)

Article Biotechnology & Applied Microbiology

A review on chemiresistive ZnO gas sensors

Mariane A. Franco et al.

Summary: This review surveys recent advances in different types and structures of chemiresistive ZnO-based gas sensors, focusing on the influence of material morphology and structure on sensor response. ZnO, with its low cost, non-toxicity, and ease of synthesis, can form heterostructures that enhance sensor performance.

SENSORS AND ACTUATORS REPORTS (2022)

Article Chemistry, Physical

Transparent photovoltaic cells and self-powered photodetectors by TiO2/NiO heterojunction

Thanh Tai Nguyen et al.

Summary: The transparent photovoltaic cell (TPC) is an invisible solar cell capable of transmitting visible light while absorbing UV light to generate electricity, suitable for various electronic devices and buildings. Manufactured by combining different metal oxide species, TPC exhibits high responsiveness and efficiency.

JOURNAL OF POWER SOURCES (2021)

Article Nanoscience & Nanotechnology

Numerical analysis of the effect of illumination intensity on photoelectric parameters of the silicon solar cell with various metal nanoparticles

J. Gulomov et al.

Summary: The study focused on the effect of various metal nanoparticles on the main photoelectric parameters of silicon solar cells under different light intensities. It was found that the intensity coefficient of short circuit current densities and output power was twice as high for silicon solar cells with Ti and Pt nanoparticles compared to regular cells.

NANOSYSTEMS-PHYSICS CHEMISTRY MATHEMATICS (2021)

Article Optics

Effect of position-dependent effective mass on electron tunneling of InAs/GaSb type-II superlattice having triangular and parabolic geometries

E. Rostampour

Summary: In this study, the transmission probability of a triple quantum well triple barrier structure was investigated using the propagation matrix method for InAs/GaSb type-II superlattice. The effects of different barriers and wells widths, as well as wells geometry, on the transmission coefficient were independently studied. It was found that the variation of material composition of barriers in a specified structure can affect the tunneling effect.

OPTICS AND LASER TECHNOLOGY (2021)

Review Engineering, Electrical & Electronic

Metal oxides nanoparticles via sol-gel method: a review on synthesis, characterization and applications

Mritunjaya Parashar et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Materials Science, Multidisciplinary

Increasing the silicon solar cell efficiency with transition metal oxide nano-thin films as anti-reflection coatings

Raghavendra Sagar et al.

MATERIALS RESEARCH EXPRESS (2020)

Editorial Material Chemistry, Physical

Photovoltaics Reaching for the Shockley-Queisser Limit

Bruno Ehrler et al.

ACS ENERGY LETTERS (2020)

Article Energy & Fuels

All-inorganic metal oxide transparent solar cells

Thanh Tai Nguyen et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Proceedings Paper Multidisciplinary Sciences

Synthesis of α-MoO3 Nanorods by Sol Gel Synthesis and To Investigate Its Room Temperature Humidity Sensing Properties

L. P. Babu Reddy et al.

ADVANCES IN BASIC SCIENCES (ICABS 2019) (2019)

Article Engineering, Electrical & Electronic

Using The Kramers-Kronig Transforms To Retrieve The Conductivity From The Effective Complex Permittivity

Mostafa Bakry et al.

ADVANCES IN RADIO SCIENCE (2018)

Article Materials Science, Multidisciplinary

Electronic structure, optical properties and band edges of layered MoO3: A first-principles investigation

Qian Qu et al.

COMPUTATIONAL MATERIALS SCIENCE (2017)

Article Chemistry, Physical

Controlling n-Type Doping in MoO3

H. Peelaers et al.

CHEMISTRY OF MATERIALS (2017)

Article Materials Science, Multidisciplinary

Ab initio electronic transport model with explicit solution to the linearized Boltzmann transport equation

Alireza Faghaninia et al.

PHYSICAL REVIEW B (2015)

Article Chemistry, Multidisciplinary

Oxygen-Ions-Mediated Pseudocapacitive Charge Storage in Molybdenum Trioxide Nanobelts

Vipin Kumar et al.

CHEMNANOMAT (2015)

Proceedings Paper Physics, Applied

Structural and Optical Properties of Molybdenum Trioxide Thin Films

Shally Bhatia et al.

PROCEEDINGS OF THE 59TH DAE SOLID STATE PHYSICS SYMPOSIUM 2014 (SOLID STATE PHYSICS) (2015)

Editorial Material Multidisciplinary Sciences

Perovskite-Based Solar Cells

Gary Hodes

SCIENCE (2013)

Article Chemistry, Multidisciplinary

First-principles prediction of charge mobility in carbon and organic nanomaterials

Jinyang Xi et al.

NANOSCALE (2012)

Article Nanoscience & Nanotechnology

Solution-Processed MoO3 Thin Films As a Hole-Injection Layer for Organic Solar Cells

Claudio Girotto et al.

ACS APPLIED MATERIALS & INTERFACES (2011)

Article Chemistry, Physical

Theoretical and Experimental Study of the Electronic Structures of MoO3 and MoO2

David O. Scanlon et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)

Article Chemistry, Physical

Ordered mesoporous α-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors

Torsten Brezesinski et al.

NATURE MATERIALS (2010)

Article Materials Science, Ceramics

Spectral analysis of the angular distribution function of back reflectors for thin film silicon solar cells

J. Escarre et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2006)

Article Chemistry, Physical

An ab initio LAPW study of the α and β phases of bulk molybdenum trioxide, MoO3

AD Sayede et al.

CHEMICAL PHYSICS (2005)

Article Chemistry, Physical

Nonlinear optical property calculations by the long-range-corrected coupled-perturbed Kohn-Sham method

Muneaki Kamiya et al.

JOURNAL OF CHEMICAL PHYSICS (2005)

Article Chemistry, Physical

Hybrid functionals based on a screened Coulomb potential

J Heyd et al.

JOURNAL OF CHEMICAL PHYSICS (2003)

Article Computer Science, Interdisciplinary Applications

A comparison of transparent boundary conditions for the fresnel equation

D Yevick et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2001)