☆ 4.5 Article

Control of the Microstructure in a Al5Co15Cr30Fe25Ni25 High Entropy Alloy through Thermo-Mechanical and Thermal Treatments

METALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Heterogeneous precipitation strengthened non-equiatomic NiCoFeAlTi medium entropy alloy with excellent mechanical properties

Z. Y. Jia et al.

Summary: In this study, a non-equiatomic Ni46Co24Fe24Al3Ti3 medium entropy alloy was prepared by vacuum suspension melting. After thermo-mechanical processing, the alloy exhibited excellent mechanical properties, which can be attributed to its unique microstructure.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Large-size high-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy produced by hot-rolling and subsequent aging

Zhe Liu et al.

Summary: The feasibility of thermomechanical processing for large-size AlCoCrFeNi2.1 eutectic high-entropy alloy has been evaluated. It is found that hot-rolling can achieve outstanding tensile properties comparable to cold-rolling, while cold-rolling and warm-rolling are not effective in deforming large-size AlCoCrFeNi2.1.

MATERIALS LETTERS (2022)

添加到收藏夹

Review Multidisciplinary Sciences

Strength-Ductility Synergy in High Entropy Alloys by Tuning the Thermo-Mechanical Process Parameters: A Comprehensive Review

Rushikesh Sabban et al.

Summary: This review discusses the role of thermo-mechanical processing in achieving superior strength-ductility symbiosis in high entropy alloys at room temperature. By adjusting the microstructure and texture evolution, the strength-ductility combination of HEAs can be improved.

JOURNAL OF THE INDIAN INSTITUTE OF SCIENCE (2022)

添加到收藏夹

Article Physics, Multidisciplinary

Studying the Effect of Cold Rolling and Heat Treatment on the Microstructure and Mechanical Properties of the Fe36Mn20Ni20Cr16Al5Si3 High Entropy Alloy

Essam R. I. Mahmoud et al.

Summary: This study investigated the phase composition and mechanical properties of a multi-component high-entropy alloy through calculations and experiments. The results showed that the microstructure and properties of the alloy varied under different processing conditions, with the cold rolled sample exhibiting higher compressive yield strength and micro-hardness, while the annealed sample showed improved wear resistance.

ENTROPY (2022)

添加到收藏夹

Article Chemistry, Physical

Synthesis and Characterization of High Entropy Alloy 23Fe-21Cr-18Ni-20Ti-18Mn for Electrochemical Sensor Applications

Shashanka Rajendrachari et al.

Summary: The present paper successfully fabricated HEA powders and studied the phase transformation of HEAs using XRD and SEM. The electrochemical response of the HEA powders was investigated using cyclic voltammetry, and 8 mg HEA modified carbon paste electrode showed the highest current sensitivity and stability.

MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Tuning Microstructure and Mechanical Performance of a Co-Rich Transformation-Induced Plasticity High Entropy Alloy

Hailong Yi et al.

Summary: This study investigates the microstructure and mechanical performance of a high-performance Co-rich TRIP-HEA through thermomechanical processing. The results show that grain refinement is an effective strategy to enhance strength while maintaining ductility.

MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

A TWIP-TRIP quinary high-entropy alloy: Tuning phase stability and microstructure for enhanced mechanical properties

Zemeng Yang et al.

Summary: The study systematically investigated the microstructural changes and corresponding tensile properties of a non-equiatomic quinary high-entropy alloy, revealing the activation of multiple strengthening mechanisms that explain the excellent strength-ductility synergy. The research further expands the range of achievable mechanical properties of HEAs through phase stability-oriented alloy design and microstructure tuning.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Co-free CuFeMnNi high-entropy alloy with tunable tensile properties by thermomechanical processing

Xuejun Huang et al.

Summary: An equiatomic CuFeMnNi high-entropy alloy was synthesized and homogenized to achieve a microstructure of single face centered cubic phase based on CALPHAD prediction. The strength and ductility of the Co-free HEA can be tuned through thermomechanical processing. Experimental characterization showed plastic deformation with high stacking-fault energy, suggesting potential for low-cost alternatives in engineering applications.

JOURNAL OF MATERIALS SCIENCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure study of cold rolled Al0.32CoCrFeMnNi high-entropy alloy: Interactions between recrystallization and precipitation

Dorian Hachet et al.

Summary: The equimolar CoCrFeMnNi alloy is studied for its mechanical properties at cryogenic temperatures. The optimization of microstructure through alloying and thermomechanical treatments is focused on improving room temperature strength. The effect of alloying with aluminium is studied to trigger precipitation strengthening, and a wide range of microstructure, hardness levels, and tensile properties is achieved through the explored treatments.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strengthening in Al-, Mo- or Ti-doped CoCrFeNi high entropy alloys: A parallel comparison

Xi Li et al.

Summary: In this study, the influence of Al, Mo, and Ti on the microstructure and strengthening of the CoCrFeNi alloy was compared, revealing that Al and Ti are more effective than Mo in reducing stacking fault energy. Different doping elements lead to varying levels of solid solution and grain boundary strengthening in the alloy. This research presents valuable insights for designing high-strength alloys by manipulating solid solution and grain boundary strengthening through compositional tuning.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Decelerated grain growth kinetic and effectiveness of Hall-Petch relationship in a cold-rolled non-equiatomic high entropy alloy

M. H. Mohammad-Ebrahimi et al.

Summary: The study revealed that the grain growth kinetics of high entropy alloy is extremely low during high temperature annealing, mainly due to the solute drag like effect of whole-solute matrix and sluggish diffusion. Grain boundaries act as an effective barrier against dislocation motion, resulting in a balance between strength and ductility.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Yield strength-ductility trade-off breakthrough in Co-free Fe40Mn10Cr25Ni25 high-entropy alloys with partial recrystallization

Yatao Wu et al.

Summary: An economic cost-effective Co-free Fe40Mn10Cr25Ni25 high-entropy alloy was developed in this study, achieving a good combination of high strength and ductility through heterogeneous microstructure design.

MATERIALS TODAY COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Significant Contribution to Strength Enhancement from Deformation Twins in Thermomechanically Processed Al0.1CoCrFeNi Microstructures

Sindhura Gangireddy et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

添加到收藏夹

Article Engineering, Mechanical

Portevin-Le Chatelier mechanism in face-centered-cubic metallic alloys from low to high entropy

Che-Wei Tsai et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and Texture Evolution During Thermomechanical Processing of Al0.25CoCrFeNi High-Entropy Alloy

Leandro A. Santos et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Peierls barrier characteristic and anomalous strain hardening provoked by dynamic-strain-aging strengthening in a body-centered-cubic high-entropy alloy

S. Y. Chen et al.

MATERIALS RESEARCH LETTERS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys

Christian Haase et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Database on the mechanical properties of high entropy alloys and complex concentrated alloys

S. Gorsse et al.

DATA IN BRIEF (2018)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review of high entropy alloys and related concepts

D. B. Miracle et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

High-entropy alloys: a critical assessment of their founding principles and future prospects

E. J. Pickering et al.

INTERNATIONAL MATERIALS REVIEWS (2016)

添加到收藏夹

Article Chemistry, Physical

Heat treatment impacts the micro-structure and mechanical properties of AlCoCrFeNi high entropy alloy

A. Munitz et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

添加到收藏夹

Article Chemistry, Physical

Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries

F. Otto et al.

INTERMETALLICS (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Annealing twin development during recrystallization and grain growth in pure nickel

Y. Jin et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Microstructures and properties of high-entropy alloys

Yong Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Alloy Design and Properties Optimization of High-Entropy Alloys

Y. Zhang et al.

JOM (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

The role of annealing twins during recrystallization of Cu

D. P. Field et al.

ACTA MATERIALIA (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

A model of continuous dynamic recrystallization

S Gourdet et al.

ACTA MATERIALIA (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.