4.6 Article

Dual Effects of N-Butanol and Magnetite Nanoparticle to Biodiesel-Diesel Fuel Blends as Additives on Emission Pattern and Performance of a Diesel Engine with ANN Validation

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Experimental studies on the influence of copper oxide nanoparticle on biodiesel-diesel fuel blend in CI engine

K. Kalaimurugan et al.

Summary: Experimental research showed that the use of nanoparticles as fuel additives in diesel engines can improve combustion, enhance engine performance, and reduce emissions.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2023)

Article Thermodynamics

Numerical and experimental investigation of CI engine behaviours supported by zinc oxide nanomaterial along with diesel fuel

Upendra Rajak et al.

Summary: Zinc oxide nano additives improve brake thermal efficiency and cylinder pressure, while reducing exhaust gas temperature and brake-specific fuel consumption. However, SPM emissions remain relatively stable at certain compression ratios, with increased NO and SO2 emissions for all fuels.

ENERGY (2022)

Article Agricultural Engineering

Eichhornia crassipes nanoparticles as a sustainable lubricant additive: Tribological properties optimization and performance under boundary lubrication regime

Anthony Chukwunonso Opia et al.

Summary: The study focused on the tribological behavior of new biomaterials from Eichhornia crassipes additives, including carbon nanotubes (EC-CNT) and carboxymethyl cellulose (EC-CMC) polymer, to enhance lubrication performance. The optimized combination of 1.2 wt% EC-CNT + 0.4 wt% EC-CMC showed a significant reduction in friction and wear, with a decrease of 76.7% and 49.3% respectively compared to base oil. Higher lubricant temperatures and a load of 100 N resulted in better tribological properties and improved tribofilm formation.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Article Green & Sustainable Science & Technology

Experimental investigation on combustion and (regulated and unregulated) emissions performance of a common-rail diesel engine using partially hydrogenated biodiesel-ethanol-diesel ternary blend

Lei Zuo et al.

Summary: This study aimed to establish a partial hydrogenated biodiesel-ethanol-diesel ternary blend and investigate its combustion performance and emissions. The results revealed that the ternary blend exhibited different properties compared to the binary blend in certain aspects.

RENEWABLE ENERGY (2022)

Article Energy & Fuels

Performance enhancement and emission reduction of a diesel engine fueled with different biodiesel-diesel blending fuel based on the multi-parameter optimization theory

Zhaoxia Huang et al.

Summary: This study investigates the effects of biodiesel-diesel blends and pure diesel fuel on the performance and emission characteristics of a diesel engine, and simulates the fuel combustion process using a 3D model and an improved chemical kinetics mechanism. The results show that high intake pressure and oxygen content in biodiesel enhance performance and emission characteristics, while increasing NO emission. On the other hand, exhaust gas recirculation effectively reduces NOx emission. By optimizing the engine using an orthogonal principal component method, the NOx mass fraction is reduced by 78.6% and engine power is decreased by 5.60%.
Article Energy & Fuels

Comparative study on combustion and particulate emissions for diesel-biodiesel and diesel-diglyme blends

Di Yage et al.

Summary: This study investigated the influence of biodiesel and diglyme blends on combustion and particulate emission characteristics in a 4-cylinder direct-injection diesel engine. The results showed that the increase in oxygen content led to advanced in-cylinder pressure and heat release curve for both blends, but with lower peak values compared to diesel. The combustion center was slightly varied for biodiesel fuels but significantly postponed for diglyme blends. Furthermore, the smoke opacity, brake specific particulate emissions, and the geometric mean diameter of particles decreased with the increase in soluble organic fraction proportion, with more obvious variations observed in biodiesel blends. In addition, the total particle number concentration and the particle smaller than 100 nm in diameter increased gradually and unidirectionally for biodiesel blended fuels, but for diglyme blends, the peak value of the total particle was found from the blend containing 2% oxygen and the particles from all diglyme blends were higher than that from diesel. Compared with biodiesel, diglyme fuels had more particulate and particles emissions on the same oxygen base.
Article Agricultural Engineering

Recent advances in butanol production by acetone-butanol-ethanol (ABE) fermentation

Ibham Veza et al.

Summary: This review article discusses the history of the butanol industry and recent advances in butanol production by ABE fermentation, highlighting novel approaches such as searching for abundant and inexpensive substrates and optimizing processes. The challenges of biobutanol production, including low yield and end-product toxicity, as well as potential research routes, are summarized, along with the future research direction of butanol production by ABE fermentation.

BIOMASS & BIOENERGY (2021)

Article Multidisciplinary Sciences

Giant nonlinear optical responses from photon-avalanching nanoparticles

Changhwan Lee et al.

Summary: The study demonstrates room-temperature photon avalanching in single nanostructures, achieved using small, Tm3+-doped upconverting nanocrystals, and shows its application in super-resolution imaging in near-infrared spectral windows of maximal biological transparency.

NATURE (2021)

Article Thermodynamics

Application of Elman and Cascade neural network (ENN and CNN) in comparison with adaptive neuro fuzzy inference system (ANFIS) to predict key fuel properties of ABE-diesel blends

Ibham Veza et al.

Summary: This study developed neural network models to predict the fuel properties of ABE, finding that the ANFIS model performed the best in predicting the key fuel properties of ABE-diesel blends.

INTERNATIONAL JOURNAL OF GREEN ENERGY (2021)

Article Multidisciplinary Sciences

Nanofluids Characterization for Spray Cooling Applications

Miguel Sanches et al.

Summary: This paper investigates the thermal performance of nanofluids in spray cooling applications, focusing on the impact of nanoparticle geometry, concentration, and structure on heat transfer enhancement. The study shows that increasing nanoparticle concentration leads to lower surface temperatures and higher heat fluxes, while also affecting the thermophysical properties of the nanofluids. This research highlights the importance of experimental data in accurately setting model parameters for spray dynamics and heat transfer phenomena.

SYMMETRY-BASEL (2021)

Article Green & Sustainable Science & Technology

Effect of Au/CeO2 as fuel borne catalysts on performance, combustion and emissions characteristics of CI engine

M. K. Shukla et al.

Summary: The study found that doping diesel fuel with Au/CeO2 can enhance combustion, increase in-cylinder pressure, and effectively reduce NO and hydrocarbon emissions. However, this diesel fuel led to a decrease in particulate number concentration in nucleation mode while an increase in accumulation mode.

CLEANER ENGINEERING AND TECHNOLOGY (2021)

Review Energy & Fuels

Effect of fuel additives and exhaust gas recirculation in biodiesel fuelled CI engine: a review

Prabhu Appavu et al.

Summary: This paper discusses NOx emission reduction techniques, summarises the emission characteristics of various biodiesel-diesel blends, and highlights the efficiency of exhaust gas recirculation method.

INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2021)

Article Energy & Fuels

Cetane index prediction of ABE-diesel blends using empirical and artificial neural network models

Ibham Veza et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)

Review Chemistry, Applied

Progress of acetone-butanol-ethanol (ABE) as biofuel in gasoline and diesel engine: A review

Ibham Veza et al.

FUEL PROCESSING TECHNOLOGY (2019)

Proceedings Paper Green & Sustainable Science & Technology

Simulation of Predictive Kinetic Combustion of Single Cylinder HCCI Engine

Ibham Veza et al.

PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION GREEN ENERGY VEHICLE (AIGEV 2018) (2019)

Review Green & Sustainable Science & Technology

Impact of modified parameters on diesel engine characteristics using biodiesel: A review

Varun Goel et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Review Green & Sustainable Science & Technology

Comprehensive overview on diesel additives to reduce emissions, enhance fuel properties and improve engine performance

Ahmad Fayyazbakhsh et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Green & Sustainable Science & Technology

Performance and emission characteristics of a CI engine fuelled with carbon nanotubes and diesel-biodiesel blends

Seyyed Hassan Hosseini et al.

RENEWABLE ENERGY (2017)

Review Thermodynamics

Biodiesel and renewable diesel: A comparison

Gerhard Knothe

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2010)

Article Thermodynamics

Studies on the ignition behaviour of boron powder

Ashish Jain et al.

THERMOCHIMICA ACTA (2010)

Article Green & Sustainable Science & Technology

Diesterol: An environment-friendly IC engine fuel

Hadi Rahimi et al.

RENEWABLE ENERGY (2009)

Review Thermodynamics

Effect of biodiesel fuels on diesel engine emissions

Magin Lapuerta et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2008)