4.6 Article

Plasma Treatment as a Sustainable Method for Enhancing the Wettability of Jute Fabrics

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Textiles

Adhesion behavior of different droplet on superhydrophobic surface of cotton fabric based on oxygen plasma etching

Wei Zhang et al.

Summary: Oxygen plasma etching and spraying of hydrophobic suspension containing SiO2 nanoparticles were used to create superhydrophobic cotton fabric. The fabric showed strong water repellency and anti-adhesion properties, making it suitable for various applications in daily life and medical protection.

JOURNAL OF THE TEXTILE INSTITUTE (2023)

Article Materials Science, Textiles

Standardization of a Chemical Modification Protocol for Jute Fabric Reinforcement

L. Ammayappan et al.

Summary: Chemical modification has significant effects on the structure and properties of jute reinforcement, and the suitable modification concentration is found at 5% (w/v).

JOURNAL OF NATURAL FIBERS (2022)

Article Chemistry, Multidisciplinary

Dielectric barrier plasma effect on surface functionality and coating properties of ultrasonically coated cotton with ZnO nanoparticles and Aloe vera extraction

I. U. Haq et al.

Summary: This study focuses on the influence of DBD plasma on the surface functionality and coating properties of cotton fabric ultrasonically coated with zinc oxide nanoparticles. The reduction of zinc ions to zinc oxide with Aloe vera followed by ultrasonic coating on plasma-functionalized fabric is explored. The UV protective effect of the zinc oxide-coated fabric is highlighted through low UV transmittance and high UV protection factor measurements.

CHEMICAL PAPERS (2022)

Article Multidisciplinary Sciences

Efficient, biosafe and tissue adhesive hemostatic cotton gauze with controlled balance of hydrophilicity and hydrophobicity

Huaying He et al.

Summary: The authors develop a modified cotton gauze with a catechol compound featuring a flexible long hydrophobic alkyl chain, which shows excellent hemostatic performance.

NATURE COMMUNICATIONS (2022)

Article Agricultural Engineering

Effect of chemical modifications and coating with Cu-based nanoparticles on the electro-physical properties of jute fabrics in a condition of high humidity

Aleksandra Ivanovska et al.

Summary: This study investigated the electro-physical properties of jute fabrics, including their chemical composition, crystallinity, structural characteristics, and moisture sorption. The results showed that the properties of the fabrics can be significantly improved by chemical modification and coating with Cu-based nanoparticles, leading to an extended lifetime.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Article Materials Science, Textiles

Enhanced Antimicrobial Activity of Atmospheric Pressure Plasma Treated and Aged Cotton Fibers

Ana D. Kramar et al.

Summary: Plasma pretreatment of raw cotton fibers combined with silver sorption enhances the antimicrobial activity of fabrics, with significantly higher silver sorption observed when conducted seven days after plasma treatment, highlighting the importance of plasma aging as a factor in fibers' functionalization.

JOURNAL OF NATURAL FIBERS (2022)

Review Polymer Science

Current Development and Future Perspective on Natural Jute Fibers and Their Biocomposites

Sweety Shahinur et al.

Summary: The increasing use of synthetic products can cause pollution and harm to the environment and living organisms. It is important to replace these harmful materials with natural, renewable, and biodegradable materials. Jute, a natural fiber, is playing a vital role in the development of composite materials with potential applications in various fields. This paper reviews the characterization and performance of jute fibers and discusses research advancements in enhancing the properties of polymer materials reinforced with jute fibers. It also explores emerging research on jute fiber and highlights the challenges and potential future directions for jute and its derivative products.

POLYMERS (2022)

Article Biochemistry & Molecular Biology

Effect of bio-based derived epoxy resin on interfacial adhesion of cellulose film and applicability towards natural jute fiber-reinforced composites

Bijender Kumar et al.

Summary: This study reports a bio-based epoxy resin and its application in the fabrication of VDE-DDM/TJF composites for fiber-reinforced materials. The results show that VDE-DDM resin exhibits superior adhesion to cellulose compared to other resins and demonstrates higher tensile strength and thermal stability. Furthermore, the VDE-DDM/TJF composites exhibit excellent flame retardancy.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Review Green & Sustainable Science & Technology

Comprehensive Review on Solar Stills-Latest Developments and Overview

Obai Younis et al.

Summary: This literature study provides an overview of recent developments in various solar still types and encourages further research in this field. The results show that using specific materials and improving different components of the system can enhance the performance of solar stills and reduce heat loss.

SUSTAINABILITY (2022)

Article Materials Science, Multidisciplinary

Antimicrobial finishing of cotton fabric by atmospheric pressure plasma

Yu Cheng et al.

Summary: By using atmospheric pressure plasma treatment, two antimicrobial agents were successfully grafted onto cotton fabrics, and their antimicrobial efficiency was tested, showing sound effects.

MATERIALS RESEARCH EXPRESS (2022)

Article Multidisciplinary Sciences

Surface modification and improvements of wicking properties and dyeability of grey jute-cotton blended fabrics using low-pressure glow discharge air plasma

M. Hedayet Ullah et al.

Summary: This study investigated the enhancement of wicking properties and dyeability of jute-cotton blended fabrics through low-pressure glow discharge (LPGD) air plasma treatment. Various experimental techniques were used to analyze the microscopic features, functional groups, and wettability of the fabrics. Results showed that plasma treatment led to improved wettability and dye absorption, with the best results observed with a 20-minute treatment time. The findings suggest that LPGD air plasma treatment can effectively enhance the performance of jute-cotton blended fabrics in terms of wicking and dyeing.

HELIYON (2021)

Article Agricultural Engineering

Obtaining jute fabrics with enhanced sorption properties and closing the loop of their lifecycle

Aleksandra Ivanovska et al.

Summary: The study enhanced the sorption properties of jute fabrics through alkali and oxidative modifications, evaluating their potential as biosorbents for anthraquinone dye C. I. Acid Blue 111. The modifications led to improved water retention power, capillarity, and fibers' swelling, while a possible mechanism of dye biosorption onto jute fabric waste was proposed based on various factors such as dye pKa values and fabric properties.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Article Chemistry, Multidisciplinary

Cyanobacterial Potential for Restoration of Loess Surfaces through Artificially Induced Biocrusts

Tamara Palanacki Malesevic et al.

Summary: Loess, a highly porous and easily erosive aeolian sediment covering about 10% of the Earth's surface, poses environmental challenges. This study aims to assess the potential of cyanobacteria for restoring exposed loess surfaces through the development of biological loess crusts. The findings confirm that cyanobacteria can interact with loess particles to stabilize the sediment.

APPLIED SCIENCES-BASEL (2021)

Article Chemistry, Physical

Iso- and Anisotropic Etching of Micro Nanofibrillated Cellulose Films by Sequential Oxygen and Nitrogen Gas Plasma Exposure for Tunable Wettability on Crystalline and Amorphous Regions

Katarina Dimic-Misic et al.

Summary: The cellulose films obtained from refined pulp with different enzymatic pretreatment digestion times were exposed to gas plasma, resulting in surface chemical and morphological changes affecting mechanical and surface properties. Single and dual exposure to oxygen and nitrogen plasma showed differing effects on the roughness, nanostructural and chemical changes, and wettability of the cellulose film. Oxygen plasma induced greater morphological change, while nitrogen plasma contributed more to chemical modification of the film surface.

MATERIALS (2021)

Article Green & Sustainable Science & Technology

Environmental Impacts of Renewable Insulation Materials

Andreas Gess et al.

Summary: The study found that insulation materials from renewable resources have lower environmental impacts compared to traditional materials, especially in terms of greenhouse gas emissions and climate change. Among the four materials analyzed, seaweed had the lowest overall emissions. Insulation materials derived from non-mineral, non-fossil, and non-wooden resources, although niche in market share, have significant potential in reducing the environmental footprint of construction projects.

SUSTAINABILITY (2021)

Article Green & Sustainable Science & Technology

Use of Nano-TiO2 self-assembled flax fiber as a new initiative for immiscible oil/water separation

Yunqiu Liu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Materials Science, Paper & Wood

Multifunctional jute fabrics obtained by different chemical modifications

A. Ivanovska et al.

CELLULOSE (2020)

Review Green & Sustainable Science & Technology

Cleaner dyeing of textiles using plasma treatment and natural dyes: A review

Aminoddin Haji et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Materials Science, Textiles

Waste Jute Fabric as a Biosorbent for Heavy Metal Ions from Aqueous Solution

A. Ivanovska et al.

FIBERS AND POLYMERS (2020)

Article Chemistry, Multidisciplinary

Electrokinetic properties of chemically modified jute fabrics

Aleksandra M. Ivanovska et al.

JOURNAL OF THE SERBIAN CHEMICAL SOCIETY (2020)

Article Materials Science, Paper & Wood

Influence of the alkali treatment on the sorption and dielectric properties of woven jute fabric

A. Ivanovska et al.

CELLULOSE (2019)

Review Agronomy

Cyanobacteria and loess-an underestimated interaction

Zorica Svircev et al.

PLANT AND SOIL (2019)

Article Agricultural Engineering

Sorption and dielectric properties of jute woven fabrics: Effect of chemical composition

A. Ivanovska et al.

INDUSTRIAL CROPS AND PRODUCTS (2019)

Article Materials Science, Paper & Wood

Surface cleaning of raw cotton fibers with atmospheric pressure air plasma

Ana D. Kramar et al.

CELLULOSE (2018)

Article Materials Science, Composites

Effect of gas type and application distance on atmospheric pressure plasma jet-treated flax composites

Umit Huner et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)

Article Chemistry, Applied

Surface lignin removal on coir fibers by plasma treatment for improved adhesion in thermoplastic starch composites

Joao Gabriel Guimaraes de Farias et al.

CARBOHYDRATE POLYMERS (2017)

Article Engineering, Chemical

Influence of alkali treatment on flax fiber for use as reinforcements in polylactide stereocomplex composites

Huihui Zhang et al.

POLYMER ENGINEERING AND SCIENCE (2015)

Article Geography, Physical

Importance of biological loess crusts for loess formation in semi-arid environments

Zorica Svircev et al.

QUATERNARY INTERNATIONAL (2013)

Article Materials Science, Composites

A surface-property relationship of atmospheric plasma treated jute composites

Abdullah A. Kafi et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2011)

Article Physics, Fluids & Plasmas

Plasma Treatment of Natural Jute Fibre by RIE 80 plus Plasma Tool

M. M. Morshed et al.

PLASMA SCIENCE & TECHNOLOGY (2010)

Article Chemistry, Multidisciplinary

Surface modification of lignocellulosic fibres in atmospheric air pressure plasma

Alexis Baltazar-Y-Jimenez et al.

GREEN CHEMISTRY (2007)

Article Chemistry, Analytical

Effects of short-time vibratory ball milling on the shape of FT-IR spectra of wood and cellulose

M Schwanninger et al.

VIBRATIONAL SPECTROSCOPY (2004)