☆ 4.6 Article

High Reflectivity and Thermal Conductivity Ag-Cu Multi-Material Structures Fabricated via Laser Powder Bed Fusion: Formation Mechanisms, Interfacial Characteristics, and Molten Pool Behavior

MICROMACHINES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Manufacturing

Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion

Di Wang et al.

Summary: This article provides a comprehensive review of the recent achievements in multi-material structures fabricated via LPBF, including interface characteristics and strengthening methods, critical technical issues, and potential applications. The paper introduces the concept and scope of multi-material structures, presents the interface characteristics and strengthening methods, discusses the critical technical issues in LPBF, and illustrates the potential applications in various fields. Finally, an outlook is outlined for future research in this area.

VIRTUAL AND PHYSICAL PROTOTYPING (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Simultaneous strength and ductility enhancements of high thermal conductive Ag7.5Cu alloy by selective laser melting

Wei Xiong et al.

Summary: The study demonstrates that by applying multi-scale synergies to Ag7.5Cu alloy, a significant enhancement in yield strength and ductility was achieved without post-treatment. This approach breaks the strength-ductility trade-off of conventional SLM alloys and showcases a unique strategy that leverages high thermal conductivity and internal stresses.

SCIENTIFIC REPORTS (2022)

添加到收藏夹

Article Chemistry, Analytical

Study on Interfacial Bonding Properties of NiTi/CuSn10 Dissimilar Materials by Selective Laser Melting

Changhui Song et al.

Summary: The study explores the bonding of NiTi alloy with shape memory effect and CuSn10 alloy with good ductility, electrical conductivity, and thermal conductivity using selective laser melting. By forming interlayers with different SLM process parameters, the study found columnar grain and refined grains in the interfacial region, as well as good diffusion of elements. The analysis showed that the strengthening of the interfacial bonding can be achieved through the presence of columnar grain, refined grains, and Ni4Ti3 phase at the interface.

MICROMACHINES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selective laser melting of dense and crack-free AlCoCrFeNi2.1 eutectic high entropy alloy: Synergizing strength and ductility

Lin He et al.

Summary: By leveraging the good castability of eutectic high entropy alloys and high cooling rate of selective laser melting (SLM), a nearly fully dense and crack-free AlCoCrFeNi2.1 eutectic high entropy alloy with exceptional strength-ductility synergy was obtained. The heterogeneous eutectic microstructure consisting of refined cells at nanoscale contributed to the enhanced strength and ductility.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Physical and chemical properties of Ag-Cu composite electrical contacts prepared by cold-press and sintering of silver-coated copper powder

Z. Mousavi et al.

Summary: The effects of silver content, sintering temperature, sintering time, and compaction pressure on the properties of contacts were studied. It was found that increasing the silver content and the time and temperature of the sintering process increased the oxidation of copper. Galvanic corrosion and the Kirkendall effect between copper and silver resulted in the formation of microvoids around copper particles, facilitating the copper oxidation. The apparent bulk density remained relatively constant with increasing sintering temperature up to 700 degrees C, but decreased sharply at higher temperatures. Increasing the sintering time up to 60 minutes increased the apparent bulk density, while longer times decreased it. Compaction pressure did not significantly affect the apparent bulk density.

MATERIALS CHEMISTRY AND PHYSICS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-scale defects in powder-based additively manufactured metals and alloys

J. Fu et al.

Summary: This review paper addresses the formation, influence, and control of defects in powder-based metal additive manufacturing (AM). It classifies the defects into three categories: geometry-related, surface integrity-related, and microstructural defects, and discusses their root causes and influencing factors. The paper also introduces detection methods and modeling for these defects, and reviews their effects on the mechanical properties of AMed metallic components. Various control and mitigation methods are summarized and discussed. The research gaps and future prospects of the multi-scale AM defects are identified.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Physics, Multidisciplinary

Laser melting modes in metal powder bed fusion additive manufacturing

Cang Zhao et al.

REVIEWS OF MODERN PHYSICS (2022)

添加到收藏夹

Review Chemistry, Analytical

A Review of Spatter in Laser Powder Bed Fusion Additive Manufacturing: In Situ Detection, Generation, Effects, and Countermeasures

Zheng Li et al.

Summary: Spatter, an undesired phenomenon in laser powder bed fusion (L-PBF), has a significant impact on forming quality. Research on spatter is crucial in improving L-PBF systems.

MICROMACHINES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Alloys-by-design: Application to new superalloys for additive manufacturing

Yuanbo T. Tang et al.

Summary: New grades of gamma/gamma' nickel-based superalloy for the additive manufacturing process were designed using computational approaches, with processing trials carried out using powder-based selective laser melting. The superior processability and mechanical behaviour of the new alloys were demonstrated through microstructural characterisation, calorimetry and hot tensile testing. Suggestions for refinements to the modelling approach were also made.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of silver addition in copper-silver alloys fabricated by laser powder bed fusion in situ alloying

John Robinson et al.

Summary: In this study, copper-silver structures with varying silver content were fabricated using in situ alloying and Laser Powder Bed Fusion (L-PBF) Additive Manufacturing (AM). Various analyses including SEM, XCT and XRD were conducted to study the morphology, distribution, elemental analysis, pore defects, atomic crystal structure, and mechanical properties of the CuAg alloys. Results showed that increasing silver content reduced pore defects and size, while annealing process increased porosity and improved mechanical properties.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the formation of Fish-scale morphology with curved grain interfacial microstructures during selective laser melting of dissimilar alloys

Liming Yao et al.

Summary: The study investigates the physical mechanisms behind the formation of different solidified interface morphologies during laser powder bed fusion of Inconel 718 on 316L austenitic stainless steel substrate. Three distinct interface morphologies were identified, with the influence of processing conditions on melt pool geometry and alloying degree elucidated.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of manufacturing steps on the interfacial defects of laser powder bed fusion 316L/CuSn10

Jie Chen et al.

Summary: The manufacturing of 316L/CuSn10/316L sandwich structure was successfully completed using a multi-material laser powder bed fusion (L-PBF) system. Intermittent cracks and branch microcracks were found at the interface of forming steel on the copper, while only branch microcracks appear when copper is formed on steel.

MATERIALS LETTERS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Vaporization of alloying elements and explosion behavior during laser powder bed fusion of Cu-10Zn alloy

Jie Yin et al.

Summary: The vaporization of alloying elements during laser powder bed fusion (LPBF) has a significant effect on the chemical composition, microstructure, and mechanical properties, especially in materials containing volatile elements. In this study, a new defect formation mechanism called explosion-induced crater was identified, which can be mitigated by increasing the lifetime of the molten pool to improve forming quality. The research provides a scientific basis for achieving stable forming with fewer defects in LPBF of difficult-to-form materials.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Metal additive manufacturing in aerospace: A review

Byron Blakey-Milner et al.

Summary: Metal additive manufacturing in aerospace industry offers significant opportunities for cost reduction, material innovation, design flexibility, and lightweighting. The technology not only enhances performance but also simplifies design and manufacturing processes.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Effect of Selective Laser Melting Process on the Microstructure, Density, and Electrical Conductivity of Silver-Coated Copper Cores

Temel Varol et al.

Summary: In this study, compact materials were fabricated using copper-silver core-shell particles obtained by electroless coating method through selective laser melting (SLM). The investigation focused on the effects of SLM parameters on properties such as microstructure, density, and electrical conductivity. The study showed that the parameters used significantly influenced the properties of the compacts, with silver shell thickness, apparent density, and electrical conductivity being key factors.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additive manufacturing of steel-copper functionally graded material with ultrahigh bonding strength

Chaolin Tan et al.

Summary: Additive manufacturing technology is used to process functionally graded materials with high bonding strength, as demonstrated by the successful development of a steel-copper FGM using laser powder bed fusion. X-ray tomography was used to evaluate the low porosity level and the fine dendritic grains in the interface, which contribute to the high interfacial strength. Mechanical and fatigue tests confirmed the ultrahigh bonding strength in FGMs, surpassing that of traditional manufacturing methods, with discussion on the mechanisms involved.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Automation & Control Systems

Laser welding of titanium and stainless steel sheets using Ag-Cu interlayers: microstructure and mechanical characterization

Mehdi Safari et al.

Summary: In this study, the welding of 316L stainless steel sheets to commercially pure grade 2 titanium alloy was investigated using a pulsed laser with Ag-Cu interlayers to achieve higher joint strength and elongation. Mechanical properties were measured and microstructure of the weld zone was observed through tensile test, micro-hardness test, SEM imaging, and EDX analysis.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Review Multidisciplinary Sciences

Material-structure-performance integrated laser-metal additive manufacturing

Dongdong Gu et al.

Summary: The advancement of laser-metal additive manufacturing has enabled the printing of multimaterial/multifunctional designs to meet the increasing demand from industries such as aviation, aerospace, automobile manufacturing, and energy production. By integrating material-structure-performance, major improvements in performance and function can be achieved through the right materials printed in the right positions and unique structures printed for unique functions. This approach exemplifies the revolution of design and manufacturing strategies in additive manufacturing.

SCIENCE (2021)

添加到收藏夹

Review Engineering, Manufacturing

An overview of laser-based multiple metallic material additive manufacturing: from macro- to micro-scales

Chao Wei et al.

Summary: Additive manufacturing (AM) technology provides new possibilities for customized three-dimensional functional product fabrication, while research on multi-material AM (MMAM) is emerging. Lasers play a crucial role in the macro- and micro-scale AM of metallic components.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Rapid Solidification and Non-equilibrium Phase Constitution in Laser Powder Bed Fusion (LPBF) of AlSi10Mg Alloy: Analysis of Nano-precipitates, Eutectic Phases, and Hardness Evolution

Hong Qin et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

On the Relevance of Volumetric Energy Density in the Investigation of Inconel 718 Laser Powder Bed Fusion

Fabrizia Caiazzo et al.

MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Premature failure of an additively manufactured material

Zhi Wang et al.

NPG ASIA MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of direct aging on near-alpha Ti-6Al-2Sn-4Zr-2Mo (Ti-6242) titanium alloy fabricated by selective laser melting (SLM)

Haiyang Fan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dual interfacial characterization and property in multi-material selective laser melting of 316L stainless steel and C52400 copper alloy

Yuchao Bai et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stable formation of powder bed laser fused 99.9% silver

John Robinson et al.

MATERIALS TODAY COMMUNICATIONS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Energy harvesting performance of silver electroplated fabrics

Azam Ali et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of CuSn/18Ni300 bimetallic porous structures manufactured by selective laser melting

Mingkang Zhang et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing

M. J. Bermingham et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Interfacial microstructure and mechanical. properties of 316L /CuSn10 multi-material bimetallic structure fabricated by selective laser melting

Jie Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of selective laser melting parameters on morphology, microstructure, densification and mechanical properties of supersaturated silver alloy

Wei Xiong et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Review Nanoscience & Nanotechnology

Additive manufacturing of functionally graded materials: A review

Chi Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of powder oxidation on defect formation in laser additive manufacturing

Chu Lun Alex Leung et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Laser powder bed fusion of Hastelloy X: Effects of hot isostatic pressing and the hot cracking mechanism

Quanquan Han et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Coatings & Films

An electroplated copper-silver alloy as antibacterial coating on stainless steel

Nicole Ciacotich et al.

SURFACE & COATINGS TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interfacial characteristic and mechanical performance of maraging steel-copper functional bimetal produced by selective laser melting based hybrid manufacture

Chaolin Tan et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimization of selective laser melting parameters and influence of post heat treatment on microstructure and mechanical properties of maraging steel

James Mutua et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel

Chaolin Tan et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selective laser melting of Al7050 powder: Melting mode transition and comparison of the characteristics between the keyhole and conduction mode

Ting Qi et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Electrochemistry

Structural properties of electrodeposited Cu-Ag alloys

Roberto Bernasconi et al.

ELECTROCHIMICA ACTA (2017)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Optimization of 18-karat yellow gold alloys for the additive manufacturing of jewelry and watch parts

Ulrich E. Klotz et al.

GOLD BULLETIN (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printing: 3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles (Adv. Mater. 19/2016)

Erika Fantino et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Review Materials Science, Coatings & Films

A review of developments in the electrodeposition of tin-copper alloys

F. C. Walsh et al.

SURFACE & COATINGS TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase separation of a supersaturated nanocrystalline Cu-Co alloy and its influence on thermal stability

A. Bachmaier et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Interfacial characterization of SLM parts in multi-material processing: Intermetallic phase formation between AlSi10Mg and C18400 copper alloy

S. L. Sing et al.

MATERIALS CHARACTERIZATION (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additive manufacturing of Cu-10Sn bronze

S. Scudino et al.

MATERIALS LETTERS (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering

Chunze Yan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties

Hooyar Attar et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Chemistry, Physical

Effects of Mg on microstructure and corrosion properties of Zn-Mg alloy

Caizhen Yao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

添加到收藏夹

Article Engineering, Industrial

Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing

Wayne E. King et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)

添加到收藏夹

Review Engineering, Manufacturing

Problems and issues in laser beam welding of aluminum-lithium alloys

Rongshi Xiao et al.

JOURNAL OF MANUFACTURING PROCESSES (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Laser additive manufacturing of metallic components: materials, processes and mechanisms

D. D. Gu et al.

INTERNATIONAL MATERIALS REVIEWS (2012)

添加到收藏夹

Article Energy & Fuels

Visible and near infrared light absorbance of Ag thin films deposited on ZnO under layers by magnetron sputtering

Kazuhiro Kato et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Silver as biocides in burn and wound dressings and bacterial resistance to silver compounds

Simon Silver et al.

JOURNAL OF INDUSTRIAL MICROBIOLOGY & BIOTECHNOLOGY (2006)

添加到收藏夹

Article Multidisciplinary Sciences

Ultrahigh strength and high electrical conductivity in copper

L Lu et al.

SCIENCE (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.