4.7 Article

A Hybrid Method for Vibration-Based Bridge Damage Detection

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Mechanical

A hybrid method for damage detection and condition assessment of hinge joints in hollow slab bridges using physical models and vision-based measurements

Hao Hu et al.

Summary: This study proposes a hybrid method using physical models and vision-based measurements for damage detection and condition assessment of hinge joints in hollow slab bridges. An analytical model and finite element models are used to calculate the damage degree of hinge joints and classify their damage states. The feasibility of this method is demonstrated through application on a real-life bridge.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2023)

Proceedings Paper Engineering, Civil

A Hybrid Method for Damage Detection Using Acceleration Response of Bridges

Semih Gonen et al.

Summary: This study proposes a hybrid structural health monitoring method for vibration-based damage detection of bridge-type structures, using sensor fusion from conventional and computer vision-based acceleration measurements. Three commonly used damage measures are employed. The accuracy and efficiency of the proposed method are demonstrated in numerical case studies.

EUROPEAN WORKSHOP ON STRUCTURAL HEALTH MONITORING (EWSHM 2022), VOL 2 (2023)

Article Engineering, Civil

A data-driven approach for drive-by damage detection in bridges considering the influence of temperature change

Robert Corbally et al.

Summary: This paper proposes a new data-driven approach for drive-by monitoring of bridge condition using an Artificial Neural Network (ANN). The ANN is trained to predict bridge behavior based on acceleration measurements from a passing vehicle. The response at the tire-pavement contact point is inferred and used as the primary input to the ANN, along with vehicle speed. The proposed algorithm demonstrates improved performance in detecting bridge cracking at different speeds, pavement conditions, and temperature variations compared to traditional methods, making it a suitable approach for long term bridge condition monitoring.

ENGINEERING STRUCTURES (2022)

Article Engineering, Mechanical

Uncertainty quantification and propagation of crowd behaviour effects on pedestrian-induced vibrations of footbridges

Xinxin Wei et al.

Summary: The prediction of pedestrian-induced vibration is crucial for assessing vibration serviceability and designing vibration mitigation for footbridges. This study proposes a comprehensive approach to quantify uncertainty in both structure dynamic models and crowd behavior, and to propagate these uncertainties to the footbridge response. By analyzing uncertain parameters using a double-loop framework and Monte Carlo sampling, the study demonstrates the importance of addressing uncertainties from crowd behavior in vibration serviceability assessments of footbridges.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Engineering, Mechanical

Structural motion estimation via Hilbert transform enhanced phase-based video processing

G. Liu et al.

Summary: A novel motion estimation method based on phase-domain image processing, named Hilbert phase-based motion estimation, is proposed in this study to identify motions in a more accurate and efficient manner. By establishing the theoretical relationship between phase variation and physical motion based on the Hilbert transform, the proposed method shows superior performance compared to traditional methods. Experimental verification demonstrates that the proposed algorithm can avoid manual parameter selection and achieve high correlation coefficients in the identification results.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Article Chemistry, Multidisciplinary

Effect of Elastomeric Bearing Stiffness on the Dynamic Response of Railway Bridges Considering Vehicle-Bridge Interaction

Emrah Erduran et al.

Summary: This article presents a numerical study on the impacts of elastomeric bearing stiffness on the dynamic behavior of railway bridges under train-induced vibrations. The results show that the amplitude and location of maximum acceleration on the bridge heavily depend on the stiffness of the bearings.

APPLIED SCIENCES-BASEL (2022)

Article Engineering, Civil

Parametric analysis of the dynamic response of railway bridges due to vibrations induced by heavy-haul trains

Emrah Erduran et al.

Summary: This article presents a numerical study on the dynamic behavior of railway bridges under vibrations induced by heavy-haul traffic. It provides a comprehensive parametric study to investigate the impact of different parameters on bridge behavior.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2022)

Article Construction & Building Technology

Vision-based modal analysis of built environment structures with multiple drones

Michele Bolognini et al.

Summary: This study explores the use of multiple drones to estimate the natural frequencies and modal shapes of a structure by synchronizing their measurements. The method is able to detect variations in modal parameters and identify anomalies in the structure. Experimental results suggest that the approach is highly accurate and can support autonomous, multi-drone applications in the inspection of the built environment.

AUTOMATION IN CONSTRUCTION (2022)

Review Engineering, Multidisciplinary

A review of computer vision-based structural health monitoring at local and global levels

Chuan-Zhi Dong et al.

Summary: Computer vision technologies have gained significant attention in structural health monitoring, providing advantages such as non-contact, long distance, rapid, low cost applications. Most research focuses on the implementation and integration of two-dimensional computer vision techniques to solve structural health monitoring problems.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2021)

Article Engineering, Civil

Seismic analysis of a masonry arch bridge using multiple methodologies

Semih Gonen et al.

Summary: The paper explores the seismic assessment of a stone masonry arch bridge, highlighting the uncertainties in current assessment methods and offering recommendations for future research directions.

ENGINEERING STRUCTURES (2021)

Article Construction & Building Technology

Performance Assessment of a High-Speed Railway Bridge through Operational Modal Analysis

Xiao-Mei Yang et al.

Summary: This paper analyzes the long-term modal parameters of a railway bridge, examining the effects of various environmental factors, operational conditions, modal orders, vibration directions, and member types on modal parameters. The study shows that modal parameters can be well-identified even in the presence of nonwhite noise excitation, and performance assessment can be achieved through determining the optimal modal parameters.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2021)

Article Engineering, Mechanical

Full-field FRF estimation from noisy high-speed-camera data using a dynamic substructuring approach

Tomaz Bregar et al.

Summary: This paper introduces a novel methodology for an improved experimental estimation of full-field FRFs using a dynamic substructuring approach, by forming a hybrid model from two different experimental models of the same system through System Equivalent Model Mixing. The hybrid model demonstrates increased accuracy in estimating FRFs, especially in the high-frequency range, compared to existing methods.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Construction & Building Technology

Data Set from Long-Term Wind and Acceleration Monitoring of the Hardanger Bridge

Aksel Fenerci et al.

Summary: This data paper describes a large data set of wind and acceleration data collected through long-term monitoring of the Hardanger Bridge in Norway. The data set includes both raw and organized data, published in an open-access data repository. The paper discusses the monitoring system used, methods of signal processing and data adjusting, as well as the organization and summary of the data set.

JOURNAL OF STRUCTURAL ENGINEERING (2021)

Article Engineering, Civil

A redesigned approach to the additional damping method in the dynamic analysis of simply supported railway bridges

Bernhard Glatz et al.

Summary: The choice of vehicle models in the dynamic analysis of simply supported railway bridges directly affects the quality of computed results. While simple moving load models tend to overestimate bridge responses, models considering vehicle-bridge interaction effects give more accurate results. The Eurocode allows for additional structural damping in analyses with moving load models, but careful consideration is needed to ensure conservative results.

ENGINEERING STRUCTURES (2021)

Article Engineering, Civil

Damage detection in railway bridges using traffic-induced dynamic responses

Andreia Meixedo et al.

Summary: This paper proposes an automatic data-driven method for detecting damage in railway bridges based on traffic-induced dynamic responses, which extracts damage-sensitive features and utilizes the magnitude of loading to enhance sensitivity to small structural changes. Experimental validation shows that the method is highly sensitive to early damage detection and robust to false detections.

ENGINEERING STRUCTURES (2021)

Article Chemistry, Analytical

A Framework for Long-Term Vibration-Based Monitoring of Bridges

Emrah Erduran et al.

Summary: A new framework for long-term monitoring of bridges is proposed using vibration-based damage indicators with physical correlation to effectively detect and locate damage levels on a simulated railway bridge. The framework demonstrates a clear picture of damage initiation and development over time, and successfully identifies the location of simulated damage even under high noise levels.

SENSORS (2021)

Article Engineering, Mechanical

Bridge damage detection using rotation measurements Experimental validation

F. Huseynov et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Construction & Building Technology

Response-based time-invariant methods for damage localization on a concrete bridge

Pier F. Giordano et al.

STRUCTURAL CONCRETE (2020)

Article Engineering, Civil

Assessment of wind-induced nonlinear post-critical performance of bridge decks

Mingjie Zhang et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2020)

Article Engineering, Civil

Vibration-based damage indicators: a comparison based on information entropy

Maria Pina Limongelli et al.

JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2020)

Review Construction & Building Technology

Recent progress and future trends on damage identification methods for bridge structures

Yonghui An et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2019)

Article Engineering, Mechanical

An optical-based technique to obtain operating deflection shapes of structures with complex geometries

Vanshaj Srivastava et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Article Materials Science, Characterization & Testing

Vibration-based damage detection in beam structures with multiple cracks: modal curvature vs. modal flexibility methods

Ahmet Can Altunisik et al.

NONDESTRUCTIVE TESTING AND EVALUATION (2019)

Article Engineering, Multidisciplinary

Marker-free monitoring of the grandstand structures and modal identification using computer vision methods

Chuan-Zhi Dong et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2019)

Article Engineering, Multidisciplinary

Motion Magnification Analysis for structural monitoring of ancient constructions

Vincenzo Fioriti et al.

MEASUREMENT (2018)

Article Construction & Building Technology

Camera-Based Vibration Measurement of the World War I Memorial Bridge in Portsmouth, New Hampshire

Justin G. Chen et al.

JOURNAL OF STRUCTURAL ENGINEERING (2018)

Article Engineering, Civil

Historical Analysis of Hydraulic Bridge Collapses in the Continental United States

Madeleine M. Flint et al.

JOURNAL OF INFRASTRUCTURE SYSTEMS (2017)

Article Engineering, Mechanical

Blind identification of full-field vibration modes from video measurements with phase-based video motion magnification

Yongchao Yang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Article Engineering, Mechanical

Photogrammetry and optical methods in structural dynamics - A review

Javad Baqersad et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Article Engineering, Mechanical

Experimental validation of cost-effective vision-based structural health monitoring

Dongming Feng et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Article Construction & Building Technology

Vision-based multipoint displacement measurement for structural health monitoring

Dongming Feng et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2016)

Review Construction & Building Technology

Recent Highway Bridge Collapses in China: Review and Discussion

Fu You Xu et al.

JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2016)

Article Engineering, Mechanical

A multi-stage approach for damage detection in structural systems based on flexibility

E. Grande et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2016)

Article Construction & Building Technology

Target-free approach for vision-based structural system identification using consumer-grade cameras

Hyungchul Yoon et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2016)

Article Engineering, Civil

Vibration-Based Damage Detection and Seismic Performance Assessment of Bridges

Ekin Ozer et al.

EARTHQUAKE SPECTRA (2015)

Article Engineering, Mechanical

Autoregressive statistical pattern recognition algorithms for damage detection in civil structures

Ruigen Yao et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2012)

Article Engineering, Mechanical

Dynamic testing of a damaged bridge

Michele Dilena et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)

Review Engineering, Multidisciplinary

Vibration-based Damage Identification Methods: A Review and Comparative Study

Wei Fan et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2011)

Article Computer Science, Interdisciplinary Applications

Performance of Vibration-Based Damage Detection Methods in Bridges

Paulo J. S. Cruz et al.

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2009)

Article Computer Science, Interdisciplinary Applications

Modal flexibility analysis of cable-stayed Ting Kau bridge for damage identification

Y. Q. Ni et al.

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2008)

Review Engineering, Multidisciplinary

Vibration based condition monitoring: A review

EP Carden et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2004)

Article Instruments & Instrumentation

Modal identification of output-only systems using frequency domain decomposition

R Brincker et al.

SMART MATERIALS & STRUCTURES (2001)

Article Instruments & Instrumentation

Damage identification on the Z24 bridge using vibration monitoring

J Maeck et al.

SMART MATERIALS & STRUCTURES (2001)

Article Multidisciplinary Sciences

Vibration-based structural damage identification

CR Farrar et al.

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2001)