4.7 Article

Synthesis and Physicochemical Properties of Acrylate Anion Based Ionic Liquids

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

A Stiffness-Switchable, Biomimetic Smart Material Enabled by Supramolecular Reconfiguration

Dawei Zhao et al.

Summary: This paper reports a smart material inspired by the dermis of the sea cucumber, which can change its stiffness through developing interchangeable supramolecular configurations. The material exhibits extreme mechanical properties and excellent load-bearing capability, making it highly promising for advanced engineering fields. The material also displays self-healing behavior and designable formability.

ADVANCED MATERIALS (2022)

Article Materials Science, Paper & Wood

A self-healing water-dissolvable and stretchable cellulose-hydrogel for strain sensor

Huiqiang Wang et al.

Summary: Flexible hydrogel sensors with synergistic properties of mechanical strength, temperature sensitivity, adhesion, and self-healing present promising applications in medical monitoring, human motion detection, and intelligent robots. However, integrating these properties for hydrogel strain sensors remains challenging. A self-healing hydrogel based on deep eutectic solvent combined with PVA and CNCs shows potential as wearable strain sensors for detecting subtle movements and could be used in human-computer interaction and personal health monitoring.

CELLULOSE (2022)

Review Chemistry, Multidisciplinary

3D printed cellulose based product applications

Afrinal Firmanda et al.

Summary: Cellulose, as a abundant and sustainable natural material, is expected to substitute non-renewable polymers. The unique physicochemical characteristics of natural cellulose can be used to develop sustainable inks for 3D printing technology. Cellulose ink-based 3D printing technology is expected to support Industry 4.0 for various product applications in different fields.

MATERIALS CHEMISTRY FRONTIERS (2022)

Article Chemistry, Applied

Stretchable, freezing-tolerant conductive hydrogel for wearable electronics reinforced by cellulose nanocrystals toward multiple hydrogen bonding

Huiqiang Wang et al.

Summary: The study successfully prepared ion-conductive hydrogels with excellent mechanical properties, cold resistance, and electrical conductivity through a simple preparation process, providing a new solution for the application of new flexible electronic devices.

CARBOHYDRATE POLYMERS (2022)

Article Chemistry, Applied

Rheological properties and 3D-printability of cellulose nanocrystals/deep eutectic solvent electroactive ion gels

Vitaly K. Vorobiov et al.

Summary: This study focuses on the 3D printing of electroactive gels containing cellulose nanocrystals (CNC) and explores the effects of rheological properties of the inks on 3D printability. The morphology and ionic conductivity of the printed gels were characterized using atomic force microscopy and impedance spectroscopy measurements. The obtained materials show potential for designing 3D-printed tactile sensors.

CARBOHYDRATE POLYMERS (2022)

Article Chemistry, Applied

3D printing of all-regenerated cellulose material with truly 3D configuration: The critical role of cellulose microfiber

Rui Yuan et al.

Summary: This study successfully prepared an ink with excellent thixotropic property by utilizing residual cellulose microfiber in a dissolved cellulose solution, demonstrating the potential of direct ink writing technique in printing arbitrary three-dimensional configurations.

CARBOHYDRATE POLYMERS (2022)

Article Engineering, Biomedical

High-performance medical-grade resin radically reinforced with cellulose nanofibers for 3D printing

Nectarios Vidakis et al.

Summary: This study reports the effect of adding Cellulose NanoFiber (CNF) to a medical-grade resin in Stereolithography (SLA) Additive Manufacturing (AM) technology, aiming to create an easily processable and highly stiff bio-compound. The mechanical, microhardness, and thermal properties of the fabricated nanocomposites were evaluated, and the results showed significant reinforcement with increased tensile strength. Microscopic and surface analysis were conducted to characterize the fractured tensile specimens.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)

Article Chemistry, Multidisciplinary

Ionic Liquids as a Sustainable Platform for Nanocellulose Processing from Bioresources: Overview and Current Status

Gamal Abdalla Suliman Haron et al.

Summary: The crisis in the petrochemical industry and environmental pollution have led to a focus on the valorization of nanocellulose production from naturally occurring biopolymers. This review discusses the recent technological developments in utilizing ionic liquids as green solvents for biopolymer processing, highlighting their applications in NC production and their impact on structural and surface modifications of nanocellulose.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Applied

Rheological behavior and particle alignment of cellulose nanocrystal and its composite hydrogels during 3D printing

Tao Ma et al.

Summary: Cellulose nanocrystal (CNC) has great potential in chemical, material, and food fields as a green bioresource. Research found that 20 wt% CNC hydrogels exhibited optimal print resolution and fidelity, with a CNC alignment orientation of 72%-73% along the printing direction. Additionally, blending CNC with high/low methoxy pectin (HMP/LMP) to prepare composite hydrogels for 3D printing showed favorable print fidelity at specific ratios, providing flexible and sustainable choices for medical tissue engineering development.

CARBOHYDRATE POLYMERS (2021)

Article Agronomy

FTIR spectral band shifts explained by OM-cation interactions

Ruth H. Ellerbrock et al.

Summary: This study investigated the interactions between OM in soils and polyvalent cations such as Ca2+, and their effects on FTIR spectra. The results showed that band shifts were influenced by cation concentrations, limiting automated interpretations of FTIR spectra without prior spectral corrections specific to soils.

JOURNAL OF PLANT NUTRITION AND SOIL SCIENCE (2021)

Article Polymer Science

Polymerizable Choline- and Imidazolium-Based Ionic Liquids Reinforced with Bacterial Cellulose for 3D-Printing

Michael A. Smirnov et al.

Summary: A novel approach for 3D-printing BC reinforced UV-curable ion gels using two-component solvents has been demonstrated in this study. The cholinium-based systems showed lower viscosity and improved stability compared to the imidazolium-based ones. The grafting of poly(acrylic acid) onto cellulose nanofibers resulted in higher elongation at break and enhanced mechanical properties for choline chloride-based compositions.

POLYMERS (2021)

Article Polymer Science

Ultratough and recoverable ionogels based on multiple interpolymer hydrogen bonding as durable electrolytes for flexible solid-state supercapacitor

Yongxin Ge et al.

Summary: This study presents the synthesis of ultra-tough and recoverable ionogels with superior electrochemical properties for flexible devices, achieved through reversible sacrificial bonds in a chemically and interpolymer hydrogen-bonding hybrid crosslinked network. The ionogels exhibit high tensile strength, toughness, stretchability, and recovery, as well as high ionic conductivity, making them suitable for high-performance flexible supercapacitors.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Review Chemistry, Physical

Ionic liquids synthesis and applications: An overview

Sandip K. Singh et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Article Nanoscience & Nanotechnology

Cellulose Nanofiber-Reinforced Ionic Conductors for Multifunctional Sensors and Devices

Ming Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

3D Printable Strain Sensors from Deep Eutectic Solvents and Cellulose Nanocrystals

Chun-Wei Lai et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Physical

Study on the regularity of cellulose degradation in ionic liquids

Le Zhou et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Article Chemistry, Physical

Tuning the dynamics of imidazolium-based ionic liquids via hydrogen bonding. I. The viscous regime

C. A. Thomann et al.

JOURNAL OF CHEMICAL PHYSICS (2020)

Article Materials Science, Multidisciplinary

A Dynamic Gel with Reversible and Tunable Topological Networks and Performances

Dawei Zhao et al.

MATTER (2020)

Article Chemistry, Multidisciplinary

Rheology of Pure Ionic Liquids and Their Complex Fluids: A Review

Ahmad Shakeel et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Review Chemistry, Applied

3D printing using plant-derived cellulose and its derivatives: A review

Lei Dai et al.

CARBOHYDRATE POLYMERS (2019)

Article Engineering, Environmental

Cross-linked polymeric ionic liquids ion gel electrolytes by in situ radical polymerization

Liya Chen et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Chemistry, Applied

Plasticizing of chitosan films with deep eutectic mixture of malonic acid and choline chloride

Maria P. Sokolova et al.

CARBOHYDRATE POLYMERS (2018)

Review Chemistry, Applied

Deep eutectic solvents for polysaccharides processing. A review

Magdalena Zdanowicz et al.

CARBOHYDRATE POLYMERS (2018)

Review Polymer Science

Ionic liquids and poly(ionic liquid)s for 3D printing - A focused mini-review

Hunaid Nulwala et al.

EUROPEAN POLYMER JOURNAL (2018)

Review Chemistry, Multidisciplinary

Vibrational Spectroscopy of Ionic Liquids

Vitor H. Paschoal et al.

CHEMICAL REVIEWS (2017)

Article Materials Science, Paper & Wood

Influence of cellulose gel matrix on BMIMCl ionic liquid dynamics and conductivity

J. Kaszynska et al.

CELLULOSE (2017)

Article Nanoscience & Nanotechnology

Cellulose Nanofibrils from Nonderivatizing Urea-Based Deep Eutectic Solvent Pretreatments

Panpan Li et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Physical

Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents

Deshani H. A. T. Gunasekera et al.

FARADAY DISCUSSIONS (2016)

Article Thermodynamics

Thermal stability of imidazolium-based ionic liquids investigated by TG and FTIR techniques

Wen-quan Feng et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2016)

Article Chemistry, Physical

Three dimensional ink-jet printing of biomaterials using ionic liquids and co-solvents

Deshani H. A. T. Gunasekera et al.

FARADAY DISCUSSIONS (2016)

Article Polymer Science

Ion Conduction in Polymerized Ionic Liquids with Different Pendant Groups

Fei Fan et al.

MACROMOLECULES (2015)

Review Polymer Science

Thermoresponsive polyelectrolytes derived from ionic liquids

Yuki Kohno et al.

POLYMER CHEMISTRY (2015)

Article Chemistry, Applied

Preparation of tamarind gum based soft ion gels having thixotropic properties

Mukesh Sharma et al.

CARBOHYDRATE POLYMERS (2014)

Article Materials Science, Paper & Wood

Idealized powder diffraction patterns for cellulose polymorphs

Alfred D. French

CELLULOSE (2014)

Article Chemistry, Multidisciplinary

Dipolarity versus Polarizability and Acidity versus Basicity of Ionic Liquids as a Function of Their Molecular Structures

Alexander Schade et al.

CHEMISTRY-A EUROPEAN JOURNAL (2014)

Article Engineering, Chemical

Comprehensive Investigation on the Thermal Stability of 66 Ionic Liquids by Thermogravimetric Analysis

Yuanyuan Cao et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Article Engineering, Manufacturing

3D Bioprinting of Cellulose Structures from an Ionic Liquid

Kajsa Markstedt et al.

3D PRINTING AND ADDITIVE MANUFACTURING (2014)

Article Engineering, Chemical

Polymeric ionic liquids (PILs): Effect of anion variation on their CO2 sorption

Rupesh S. Bhavsar et al.

JOURNAL OF MEMBRANE SCIENCE (2012)

Article Chemistry, Multidisciplinary

Instantaneous dissolution of cellulose in organic electrolyte solutions

Roberto Rinaldi

CHEMICAL COMMUNICATIONS (2011)

Article Polymer Science

Poly(ionic liquid)s: Polymers expanding classical property profiles

Jiayin Yuan et al.

POLYMER (2011)

Article Polymer Science

Polymers based on ionic monomers with side phosphonate groups

O. A. Mel'nik et al.

POLYMER SCIENCE SERIES B (2010)

Review Chemistry, Multidisciplinary

Ionic Liquids and Their Interaction with Cellulose

Andre Pinkert et al.

CHEMICAL REVIEWS (2009)

Article Polymer Science

Ionic IPNs as Novel Candidates for Highly Conductive Solid Polymer Electrolytes

Alexander S. Shaplov et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2009)

Article Chemistry, Inorganic & Nuclear

Synthesis and characterization of 1-butyl 3-methyl imidazolium phosphomolybdate molecular salt

G. Ranga Rao et al.

SOLID STATE SCIENCES (2009)

Article Materials Science, Multidisciplinary

Synthesis and characterization of hybrid molecular material prepared by ionic liquid and silicotungstic acid

T. Rajkumar et al.

MATERIALS CHEMISTRY AND PHYSICS (2008)

Article Chemistry, Physical

Polymer-supported methylselenite for the oxidative carbonylation of aniline

Eun Hee Jeon et al.

APPLIED CATALYSIS A-GENERAL (2007)

Article Engineering, Environmental

Adsorption of alkylimidazolium and alkylpyridinium ionic liquids onto natural soils

Piotr Stepnowski et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2007)

Article Chemistry, Multidisciplinary

Bio ionic liquids: room temperature ionic liquids composed wholly of biomaterials

Yukinobu Fukaya et al.

GREEN CHEMISTRY (2007)

Article Biophysics

Amperometric glucose biosensor based on polymerized ionic liquid microparticles

M. Sanchez-Paniagua Lopez et al.

BIOSENSORS & BIOELECTRONICS (2006)

Article Chemistry, Analytical

Evaluation of the silanol-suppressing potency of ionic liquids

Michal Piotr Marszall et al.

JOURNAL OF SEPARATION SCIENCE (2006)

Article Chemistry, Multidisciplinary

Surfactant ionic liquid-based microemulsions for polymerization

Feng Yan et al.

CHEMICAL COMMUNICATIONS (2006)

Article Chemistry, Multidisciplinary

Room temperature ionic liquids from 20 natural amino acids

K Fukumoto et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)

Article Electrochemistry

Development of new class of ion conductive polymers based on ionic liquids

H Ohno et al.

ELECTROCHIMICA ACTA (2004)

Article Thermodynamics

Room temperature ionic liquids and their mixtures - a review

KN Marsh et al.

FLUID PHASE EQUILIBRIA (2004)

Article Chemistry, Analytical

Room temperature ionic liquid as a novel medium for liquid/liquid extraction of metal ions

GT Wei et al.

ANALYTICA CHIMICA ACTA (2003)

Article Chemistry, Multidisciplinary

Characterizing ionic liquids on the basis of multiple solvation interactions

JL Anderson et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2002)

Article Electrochemistry

Enhanced ion conduction in imidazolium-type molten salts

K Ito et al.

ELECTROCHIMICA ACTA (2000)