相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A review of the plastic value chain from a circular economy perspective
Mathilde Rosenberg Johansen et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2022)
Fused deposition modeling: process, materials, parameters, properties, and applications
Kumaresan Rajan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)
Trends in mitigation of industrial waste: Global health hazards, environmental implications and waste derived economy for environmental sustainability
Poonam Sharma et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2022)
Recycling of Bottle Grade PET: Influence of HDPE Contamination on the Microstructure and Mechanical Performance of 3D Printed Parts
Joanne Vaucher et al.
POLYMERS (2022)
3D printing filament as a second life of waste plastics-a review
Katarzyna Mikula et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)
Natural fibre filament for Fused Deposition Modelling (FDM): a review
H. J. Aida et al.
INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING (2021)
Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing
Maria A. Morales et al.
POLYMERS (2021)
City of Waste-Importance of Scale
Boguslaw Wowrzeczka
SUSTAINABILITY (2021)
The role of fiber-matrix compatibility in vacuum processed natural fiber/epoxy biocomposites
Jonathan Javier Pabon Rojas et al.
CELLULOSE (2021)
Development and Characterization of a 3D Printed Cocoa Bean Shell Filled Recycled Polypropylene for Sustainable Composites
Maria A. Morales et al.
POLYMERS (2021)
Development of 3D Printing Raw Materials from Plastic Waste. A Case Study on Recycled Polyethylene Terephthalate
Alaeddine Oussai et al.
APPLIED SCIENCES-BASEL (2021)
A review on natural fibers for development of eco-friendly bio-composite: characteristics, and utilizations
Azizatul Karimah et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries
Samarthya Bhagia et al.
APPLIED MATERIALS TODAY (2021)
Circular economy in biocomposite development: State-of-the-art, challenges and emerging trends
Vigneshwaran Shanmugam et al.
COMPOSITES PART C: OPEN ACCESS (2021)
A review on the fused deposition modeling (FDM) 3D printing: Filament processing, materials, and printing parameters
Ruben Bayu Kristiawan et al.
OPEN ENGINEERING (2021)
Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites
S. Kain et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2020)
Sustainability and environmental impact of fused deposition modelling (FDM) technologies
Luis Suarez et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
A review on advancements in applications of fused deposition modelling process
T. Sathies et al.
RAPID PROTOTYPING JOURNAL (2020)
Micro- and nano-plastics in marine environment: Source, distribution and threats - A review
Licheng Peng et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
(Micro)plastic crisis: Un-ignorable contribution to global greenhouse gas emissions and climate change
Maocai Shen et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Three-Dimensional Printing of Continuous Flax Fiber-Reinforced Thermoplastic Composites by Five-Axis Machine
Haiguang Zhang et al.
MATERIALS (2020)
Toughening by Nanodroplets: Polymer-Droplet Biocomposite with Anomalous Toughness
Yu Wang et al.
MACROMOLECULES (2020)
Sustainable Materials and Chemical Processes for Additive Manufacturing
Eva Sanchez-Rexach et al.
CHEMISTRY OF MATERIALS (2020)
Optimization of printing parameters in fused deposition modeling for improving part quality and process sustainability
Carmita Camposeco-Negrete
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Assessment of 3D printing using fused deposition modeling and selective laser sintering for a circular economy
K. DePalma et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Plastic recycling in additive manufacturing: A systematic literature review and opportunities for the circular economy
Fabio A. Cruz Sanchez et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Mechanical characterisation of a bamboo fibre/polylactic acid composite produced by fused deposition modelling
July A. Taborda-Rios et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2020)
Biorefinery of Biomass of Agro-Industrial Banana Waste to Obtain High-Value Biopolymers
Carlos Redondo-Gomez et al.
MOLECULES (2020)
The need for fully bio-based facemasks to counter coronavirus outbreaks: A perspective
Oisik Das et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
Implementing FDM 3D Printing Strategies Using Natural Fibers to Produce Biomass Composite
Waleed Ahmed et al.
MATERIALS (2020)
Mechanical Strength of Bamboo Filled PLA Composite Material in Fused Filament Fabrication
Scott Landes et al.
JOURNAL OF COMPOSITES SCIENCE (2020)
Durability Evaluation of an Additive Manufactured Biodegradable Composite with Continuous Natural Fiber in Various Conditions Reproducing Usage Environment
Yuta Yaguchi et al.
INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY (2020)
A brief overview of renewable plastics
X. Chen et al.
MATERIALS TODAY SUSTAINABILITY (2020)
How to Do a Systematic Review: A Best Practice Guide for Conducting and Reporting Narrative Reviews, Meta-Analyses, and Meta-Syntheses
Andy P. Siddaway et al.
ANNUAL REVIEW OF PSYCHOLOGY, VOL 70 (2019)
Production and characterization of bamboo and flax fiber reinforced polylactic acid filaments for fused deposition modeling (FDM)
Delphine Depuydt et al.
POLYMER COMPOSITES (2019)
Design and Manufacturing Strategies for Fused Deposition Modelling in Additive Manufacturing: A Review
Hugo I. Medellin-Castillo et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2019)
LAMINATED COMPOSITES REINFORCED WITH CHEMICALLY MODIFIED SHEETS-STALK OF Musa cavendish
K. X. Rodriguez-Soto et al.
REVISTA MEXICANA DE INGENIERIA QUIMICA (2019)
Exploring mechanical properties of fully compostable flax reinforced composite filaments for 3D printing applications
Celine Badouard et al.
INDUSTRIAL CROPS AND PRODUCTS (2019)
Mechanical, thermal, viscoelastic performance and product application of PP-rice husk Colombian biocomposites
Miguel A. Hidalgo-Salazar et al.
COMPOSITES PART B-ENGINEERING (2019)
Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts
Bin Hu et al.
MECHANICS OF MATERIALS (2019)
3D printing of continuous flax fibre reinforced biocomposites for structural applications
A. Le Duigou et al.
MATERIALS & DESIGN (2019)
Influence of Rice Husk and Wood Biomass Properties on the Manufacture of Filaments for Fused Deposition Modeling
Marie-Joo Le Guen et al.
FRONTIERS IN CHEMISTRY (2019)
Mechanical property analysis of biochar derived from cashew nut shell waste reinforced polymer matrix
R. Sundarakannan et al.
MATERIALS RESEARCH EXPRESS (2019)
Biomass waste utilisation in low-carbon products: harnessing a major potential resource
Nimisha Tripathi et al.
NPJ CLIMATE AND ATMOSPHERIC SCIENCE (2019)
3D Printing Filaments Prepared from Modified Poly(Lactic Acid)/Teak Wood Flour Composites: An Investigation on the Particle Size Effects and Silane Coupling Agent Compatibilisation
Nawadon Petchwattana et al.
JOURNAL OF PHYSICAL SCIENCE (2019)
Static and Dynamic Mechanical Properties of Poly (vinyl chloride) and Waste Rice Husk Ash Composites Compatibilized with γ-aminopropyltrimethoxysilane
Nawadon Petchwattana et al.
SILICON (2018)
Effects of material properties on warpage in fused deposition modeling parts
Emily R. Fitzharris et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Large scale additive manufacturing of eco-composites
J. F. Horta et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2018)
Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
David Stoof et al.
COMPOSITES PART B-ENGINEERING (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Circular Economy: The Concept and its Limitations
Jouni Korhonen et al.
ECOLOGICAL ECONOMICS (2018)
Towards Expeditionary Battlefield Manufacturing Using Recycled, Reclaimed, and Scrap Materials
Marc Pepi et al.
JOM (2018)
Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing
Shan Zhong et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Closing the loop on plastic packaging materials: What is quality and how does it affect their circularity?
John N. Hahladakis et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2018)
Crop residue harvest for bioenergy production and its implications on soil functioning and plant growth: A review
Mauricio Roberto Cherubin et al.
SCIENTIA AGRICOLA (2018)
Fique Fabric: A Promising Reinforcement for Polymer Composites
Sergio Neves Monteiro et al.
POLYMERS (2018)
Investigation of ABS-rice straw composite feedstock filament for FDM
Mohammed Ali Osman et al.
RAPID PROTOTYPING JOURNAL (2018)
Cork-PLA composite filaments for fused deposition modelling
Fugen Daver et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament
Aubrey L. Woern et al.
HARDWAREX (2018)
general method to improve 3D-printability and inter-layer adhesion in lignin-based composites
Ngoc A. Nguyen et al.
APPLIED MATERIALS TODAY (2018)
Effect of wood content in FDM filament on properties of 3D printed parts
Mirko Kariz et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Agro-industrial wastes and their utilization using solid state fermentation: a review
Pardeep Kumar Sadh et al.
BIORESOURCES AND BIOPROCESSING (2018)
Rethinking Timber: Investigation into the Use of Waste Macadamia Nut Shells for Additive Manufacturing
Jordan Girdis et al.
JOM (2017)
The concept of sustainable manufacturing and its definitions: A content-analysis based literature review
Anastasiia Moldavska et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Product Design in a Circular Economy Development of a Typology of Key Concepts and Terms
Marcel C. den Hollander et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Cocoa Shell Waste Biofilaments for 3D Printing Applications
Thi Nga Tran et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Mechanical and chemical recycling of solid plastic waste
Kim Ragaert et al.
WASTE MANAGEMENT (2017)
Characterization of NaOH-Treated Colombian Silverskin Coffee Fiber as a Composite Reinforcement
Daniel Roberto Hernandez Ochoa et al.
BIORESOURCES (2017)
A review on composite materials and process parameters optimisation for the fused deposition modelling process
N. Mohan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Fused Deposition Modelling of Natural Fibre/Polylactic Acid Composites
David Stoof et al.
JOURNAL OF COMPOSITES SCIENCE (2017)
Sustainable Composite Fused Deposition Modelling Filament Using Post-Consumer Recycled Polypropylene
Kim L Pickering et al.
JOURNAL OF COMPOSITES SCIENCE (2017)
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
Yubo Tao et al.
MATERIALS (2017)
Unlocking value for a circular economy through 3D printing: A research agenda
M. Despeisse et al.
TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE (2017)
Comparative environmental impacts of additive and subtractive manufacturing technologies
Henri Paris et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Preparation of starch/acrylonitrile-butadiene-styrene copolymers (ABS) biomass alloys and their feasible evaluation for 3D printing applications
Chao-Chung Kuo et al.
COMPOSITES PART B-ENGINEERING (2016)
Environmental Performance Evaluation of a Fast Mask Image Projection Stereolithography Process Through Time and Energy Modeling
Hari P. N. Nagarajan et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
Use of recycled plastics in concrete: A critical review
Lei Gu et al.
WASTE MANAGEMENT (2016)
Trends and Research Challenges in Remanufacturing
Mitsutaka Matsumoto et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2016)
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Ryosuke Matsuzaki et al.
SCIENTIFIC REPORTS (2016)
Characterization of a novel natural cellulose fabric from Manicaria saccifera palm as possible reinforcement of composite materials
A. Porras et al.
COMPOSITES PART B-ENGINEERING (2015)
The influence of Spartium junceum L. fibres modified with montmorrilonite nanoclay on the thermal properties of PLA biocomposites
Zorana Kovacevic et al.
COMPOSITES PART B-ENGINEERING (2015)
Environment friendly green composites based on soy protein isolate - A review
Rekha Rose Koshy et al.
FOOD HYDROCOLLOIDS (2015)
A global sustainability perspective on 3D printing technologies
Malte Gebler et al.
ENERGY POLICY (2014)
Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
M. A. Kreiger et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Development of composite films based on thermoplastic starch and cellulose microfibrils from Colombian agroindustrial wastes
Ursula Montoya et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
Sustainability Characterization for Additive Manufacturing
Mahesh Mani et al.
JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (2014)
Part strength evolution with bonding between filaments in fused deposition modelling This paper studies how coalescence of filaments contributes to the strength of final FDM part
Pavan Kumar Gurrala et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2014)
Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials
Angel R. Torrado Perez et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2014)
Recycling of bioplastics, their blends and biocomposites: A review
Azadeh Soroudi et al.
EUROPEAN POLYMER JOURNAL (2013)
Distributed recycling of waste polymer into RepRap feedstock
Christian Baechler et al.
RAPID PROTOTYPING JOURNAL (2013)
Plastic Degradation and Its Environmental Implications with Special Reference to Poly(ethylene terephthalate)
Hayden K. Webb et al.
POLYMERS (2013)
Additive manufacturing: technology, applications and research needs
Nannan Guo et al.
FRONTIERS OF MECHANICAL ENGINEERING (2013)
Recycling of composite materials
Yongxiang Yang et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2012)
Environmental and resource aspects of sustainable biocomposites
Francisco Vilaplana et al.
POLYMER DEGRADATION AND STABILITY (2010)
Applications and societal benefits of plastics
Anthony L. Andrady et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Plastics recycling: challenges and opportunities
Jefferson Hopewell et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
PROCESSING OF WOOD-THERMOPLASTIC COMPOSITES
Mladen Sercer et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
Degradation of polypropylene (PP) during multiple extrusions: Thermal analysis, mechanical properties and analysis of variance
Helson M. da Costa et al.
POLYMER TESTING (2007)
An introductory note on the environmental economics of the circular economy
Mikael Skou Andersen
SUSTAINABILITY SCIENCE (2007)
The circular economy - A new development strategy in China
ZW Yuan et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2006)
Fique fiber-reinforced polyester composites:: Effects of fiber surface treatments on mechanical behavior
P Gañán et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Facile methods to coat polystyrene and silica colloids with metal
JH Zhang et al.
ADVANCED FUNCTIONAL MATERIALS (2004)
Are natural fiber composites environmentally superior to glass fiber reinforced composites?
SV Joshi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
分享论文
