☆ 4.7 Article

Effect of Wax Additives and Silanization of Diatom Surfaces on Thermomechanical Properties of Polylactide Composites

POLYMERS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Characterization & Testing

Rotational molding of polylactide (PLA) composites filled with copper slag as a waste filler from metallurgical industry

Mateusz Barczewski et al.

Summary: Research has shown that using waste-based fillers in the production of PLA-based composites can increase hardness and stiffness, with filler concentrations up to 35%. For filler contents below 20%, the composite materials exhibit good structural stability and acceptable mechanical performance. Despite the lack of surface modification, the adhesion between PLA and the filler was beneficial.

POLYMER TESTING (2022)

添加到收藏夹

Article Chemistry, Applied

Antioxidant activity of mango seed wax additive on the properties of poly(lactic acid) transparent films for food packaging application

Tesi Thomas et al.

Summary: In this study, mango seed wax (MSW) was used as a plasticizing additive to improve the tensile properties of poly(lactic acid) (PLA) packaging film. The results showed that the addition of MSW increased the tensile strength and elongation at break, and improved the barrier and thermal properties of the PLA film. The optimized sample (PLA with 5% MSW) exhibited the best performance.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

Influence of Diatomaceous Earth Particle Size on Mechanical Properties of PLA/Diatomaceous Earth Composites

Marta Dobrosielska et al.

Summary: Fractionation of diatomaceous earth allowed for obtaining a range of particle sizes, with modification using the smallest particles resulting in improved impact strength, melt flow rate, and elasticity of the PLA composite material.

MATERIALS (2022)

添加到收藏夹

Article Engineering, Electrical & Electronic

Improvement of Electret Properties of Polylactide by Loading Mineral Fillers

Mansur Galikhanov et al.

Summary: The article investigates the impact of fine mineral fillers on the properties of electret materials made from polylactide. The study finds that a 4% fillers content in the polymer composition yields the best performances. Loading of the fillers slightly increases the specific volume resistivity, while having no significant effect on the chemical structure, glass transition temperature, and melting point of polylactide. The addition of fillers reduces the melt flow index and elongation at a break, with minimal changes in ultimate tensile strength.

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION (2022)

添加到收藏夹

Article Chemistry, Physical

Influence of Montmorillonite Clay Content on Thermal, Mechanical, Water Absorption and Biodegradability Properties of Treated Kenaf Fiber/ PLA-Hybrid Biocomposites

P. Ramesh et al.

Summary: The study demonstrates that adding MMT clay can enhance the performance of PLA-hybrid biocomposites, especially with 1% addition showing better mechanical properties and abrasion resistance. Furthermore, PLA-bio and hybrid biocomposites exhibit higher modulus compared to pure-PLA.

SILICON (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Super Tough Polylactic Acid Plasticized with Epoxidized Soybean Oil Methyl Ester for Flexible Food Packaging

Arkadiusz Zych et al.

Summary: The research team developed flexible PLA materials by plasticizing them with renewable and biodegradable epoxidized soybean oil methyl ester, achieving elongations at break of nearly 800%. The lubricating effect of the plasticizer allowed for more sustainable extrusion at a low temperature of 140 degrees C, preventing PLA degradation and saving energy in the process. Plasticized films also produced less acoustic noise during handling, which is important for food packaging applications.

ACS APPLIED POLYMER MATERIALS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

3D printing of PLA/n-HA composite scaffolds with customized mechanical properties and biological functions for bone tissue engineering

Wenzhao Wang et al.

Summary: This study utilized 3D printing technology to fabricate composite scaffolds of PLA and n-HA, and demonstrated their potential for large bone defect repair through biocompatibility and in vivo implantation tests.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Engineering, Environmental

The Effect of Carbodiimide on the Stability of Wood Fiber/Poly(lactic acid) Composites During Soil Degradation

Ce Sun et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

添加到收藏夹

Article Chemistry, Physical

Biogenic Composite Filaments Based on Polylactide and Diatomaceous Earth for 3D Printing

Marta Dobrosielska et al.

MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of silane-modification of diatomite on its composites with thermoplastic polyurethane

Fatma Kucuk et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

添加到收藏夹

Article Chemistry, Physical

Bio-Based Packaging Materials Containing Substances Derived from Coffee and Tea Plants

Olga Olejnik et al.

MATERIALS (2020)

添加到收藏夹

Article Polymer Science

Silane-Functionalized Sheep Wool Fibers from Dairy Industry Waste for the Development of Plasticized PLA Composites with Maleinized Linseed Oil for Injection-Molded Parts

Franciszek Pawlak et al.

POLYMERS (2020)

添加到收藏夹

Article Polymer Science

Toughness enhancement of poly(lactic acid) through hybridisation with epoxide-functionalised silane via reactive extrusion

Jae Choon Lee et al.

POLYMER DEGRADATION AND STABILITY (2019)

添加到收藏夹

Article Polymer Science

Effect of different compatibilizers on environmentally friendly composites from poly(lactic acid) and diatomaceous earth

Angel Aguero et al.

POLYMER INTERNATIONAL (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Novel 3D printing filament composite using diatomaceous earth and polylactic acid for materials properties and cost improvement

Salonika Aggarwal et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Composites

Manufacturing and characterization of poly(lactic acid) composites with hydroxyapatite

J. M. Ferri et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Effects of bamboo cellulose nanowhisker content on the morphology, crystallization, mechanical, and thermal properties of PLA matrix biocomposites

Shaoping Qian et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Polymer Science

Mechanical properties and thermal characteristics of poly(lactic acid) and paraffin wax blends prepared by conventional melt compounding and sub-critical gas-assisted processing (SGAP)

Yann-Jiun Chen et al.

EUROPEAN POLYMER JOURNAL (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

A study of mechanical and morphological properties of PLA based biocomposites prepared with EJO vegetable oil based plasticiser and kenaf fibres

Siti Hasnah Kamarudin et al.

MATERIALS RESEARCH EXPRESS (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Enhanced durability of sustainable poly (lactic acid)-based composites with renewable starch and wood flour

Shanshan Lv et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Chemistry, Physical

Comparison of the influence of talc and kaolinite as inorganic fillers on morphology, structure and thermomechanical properties of polylactide based composites

S. Ouchiar et al.

APPLIED CLAY SCIENCE (2015)

添加到收藏夹

Article Materials Science, Composites

Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices

J. P. Mofokeng et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2012)

添加到收藏夹

Article Chemistry, Physical

Silane adsorption onto cellulose fibers: Hydrolysis and condensation reactions

MCB Salon et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.