相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。
Review
Materials Science, Multidisciplinary
Dejana Pejak Simunec et al.
Summary: The progress of Industry 4.0 and robotic design has revealed a significant gap in current manufacturing techniques and available materials for electronics. There is a need to develop new electrically conductive objects with expanded flexibility and complex geometries. Fused filament fabrication (FFF) can be leveraged to create electrically conductive objects with new functionalities, and this review critically analyzes the specific challenges and solutions for promoting FFF of electrically conductive polymers and composites.
ADVANCED ENGINEERING MATERIALS
(2022)
Article
Engineering, Electrical & Electronic
Dau Thi Ngoc Nga et al.
Summary: In this study, a conformable capacitive pressure sensor was fabricated by inkjet-printing silver electrodes onto polyimide foils. The sensor was used in a commercial dressing to reduce ischemia risk and monitor ankle movement and foot pressure.
SENSORS AND ACTUATORS A-PHYSICAL
(2022)
Article
Acoustics
Xiaojuan Wang et al.
Summary: In this study, an identification strategy based on cross-correlation function with data fusion of various dynamic measurements was proposed to improve the accuracy of structural damage detection. The results showed that the cross-correlation function among different types of vibration measurements significantly improved the accuracy of the identification results, and the proposed strategy exhibited excellent robustness to measurement noise.
JOURNAL OF SOUND AND VIBRATION
(2022)
Article
Acoustics
Changqi Cai et al.
Summary: In this study, a novel metamaterial plate with attached compliant quasi-zero-stiffness resonators is proposed to achieve wave attenuation at ultra-low frequencies. The theoretical investigations and experimental results demonstrate that the QZS metamaterial plate exhibits excellent attenuation in the ultra-low-frequency band gaps.
JOURNAL OF SOUND AND VIBRATION
(2022)
Review
Polymer Science
Rashid Dallaev et al.
Summary: Currently, there is an increasing interest in carbon materials with higher deformation strength and thermophysical parameters. These materials have wide-ranging applications in various industries due to their unique physical and chemical properties. Polymer composite materials based on polyvinylidene fluoride (PVDF) have great potential for scientific and technical purposes, leading to numerous studies on their structure-property characteristics, processing, application, and environmental impact. By utilizing innovative technologies, a broader conceptual understanding of new generation polymeric materials can be achieved, contributing significantly to the scientific landscape of the modern world. This review explores the advanced properties and potential applications of PVDF, discussing its various forms, available trademarks in the market, and detailed overview of current and future applications. Additionally, it delves into the processing and chemical properties of PVDF, such as radiation carbonization and beta-phase formation.
Article
Acoustics
Keisuke Yamada et al.
Summary: This paper presents a piezoelectric two-degree-of-freedom vibration absorber and provides theoretical analysis and experimental verification of its effectiveness.
JOURNAL OF SOUND AND VIBRATION
(2022)
Article
Engineering, Mechanical
Tibor Barsi Palmic et al.
Summary: This research demonstrates the first monolithic 3D-printed stacked dielectric actuators (SDEAs) using a commercially accessible extrusion 3D printer and thermoplastic filaments. The challenges of single-process fabrication of the dielectric layer and electrodes, repeatability and reliability of the 3D-printed thin dielectric layer, and layer stacking were successfully addressed. Four actuators with different active areas and stacked active layers were 3D printed and their functionality was demonstrated through dynamic electromechanical characterization. These actuators show promise for applications requiring high-frequency resonators or high controllability in the sub-resonance region.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
(2022)
Article
Acoustics
F. A. Pires et al.
Summary: This paper experimentally assesses the potential of locally resonant metamaterials (LRMs) in suppressing flow-induced noise and vibration in coupled vibro-acoustic systems. The vibrations of a flat plate under turbulent flow excitation are measured and analyzed, and different LRM solutions are designed to reduce the vibrations. The noise radiation from the plate into a hard-walled backing cavity is evaluated, and the plate is then treated with the designed LRM configurations. The results show that the LRM solutions effectively reduce the vibrations and noise radiation of the system.
JOURNAL OF SOUND AND VIBRATION
(2022)
Article
Acoustics
Gabriel Konda Rodrigues et al.
Summary: This paper presents a modular vibration control unit that uses a piezoelectric patch connected to a self-tuning RL-shunt to reduce the resonant response of a specific flexural mode on thin structures. The resistive and inductive components of the shunt are tuned online to maximize the power absorbed by the shunt from the resonant response of the target flexural mode. The paper provides simulation and experimental results to demonstrate the effectiveness of the proposed method.
JOURNAL OF SOUND AND VIBRATION
(2022)
Article
Acoustics
Grigorios M. Chatziathanasiou et al.
Summary: This paper presents a semi-active electromechanical Tuned Mass Damper (SATMD) that provides robust multi-modal vibration suppression capabilities in large flexible structures. Numerical and experimental evaluations show that the proposed SATMD has effective vibration reduction capabilities in low-frequency range.
JOURNAL OF SOUND AND VIBRATION
(2022)
Article
Engineering, Electrical & Electronic
Qianju Cheng et al.
Summary: This paper presents a novel piezoelectric energy harvester (PEH) based on the traditional impact frequency up-converted PEH to achieve lower and broader operating frequency. The introduced nonlinear magnetic force offers a lower initial frequency and broader operating bandwidth, as shown by theoretical results and experimental study.
SENSORS AND ACTUATORS A-PHYSICAL
(2022)
Article
Engineering, Electrical & Electronic
Yangbo Yuan et al.
Summary: A flexible bionic piezoelectric sensor inspired by the lateral line structure of fish is proposed in this study, which has a low detection limit, can conform to a cylindrical surface, and accurately sense respiratory states.
SENSORS AND ACTUATORS A-PHYSICAL
(2022)
Article
Acoustics
Tingfeng Ma et al.
Summary: This study improves the resistance-tuning characteristics of metamaterial beams by applying piezoelectric unit cells with a lateral electric field (LEF), resulting in better vibration attenuation properties. LEF resonators exhibit stronger piezoelectric coupling and can maintain better vibration attenuation properties when the bandgap width is broadened.
JOURNAL OF SOUND AND VIBRATION
(2021)
Article
Engineering, Electrical & Electronic
Alize Vaihiria Gaumet et al.
Summary: The study introduces the synthesis and testing of miniature sensors for structural health monitoring, capable of detecting strain relaxation events and providing early warning of plastic deformation in materials. The sensors are made of thin composite films of polydimethylsiloxane and graphite nanoparticles that conduct via tunneling percolation, showing high sensitivity to deformation.
SENSORS AND ACTUATORS A-PHYSICAL
(2021)
Article
Engineering, Electrical & Electronic
Zuozong Yin et al.
Summary: This study introduces a shoe-mounted piezoelectric energy harvester for harvesting energy from human walking. Experimental results demonstrate that the proposed PEH can generate stable output power at different gait frequencies, suggesting its potential for driving wearable devices.
SENSORS AND ACTUATORS A-PHYSICAL
(2021)
Article
Polymer Science
Fatemeh Mashayekhi et al.
Summary: This study investigates the adhesion between PI and PLA in 3D printed structures, focusing on the possibility of embedding FBG sensors. The combination of mechanical abrasion and the use of polydopamine as an adhesive achieves the optimal adhesion between PI and PLA. This finding is attributed to a synergetic effect between mechanical interlocking and chemical interaction between the two polymers.
Article
Engineering, Mechanical
Matic Arh et al.
Summary: Fused-filament fabrication technology has been used for manufacturing various sensors, but faces challenges such as anisotropic behavior and size limitations. This paper focused on the design principles and experimental results of a single-axis accelerometer, providing a foundation for further optimization of the prototype sensor.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2021)
Review
Engineering, Electrical & Electronic
Haitong Liang et al.
Summary: Piezoelectric energy harvesters (PEHs) generate electricity by scavenging energy from environmental vibrations through the piezoelectric effect, with a comprehensive review of existing structural solutions and materials categorizing designs into five configurations and comparing the performance of different piezoelectric materials. This analysis provides guidance for the design and optimization of PEHs.
SENSORS AND ACTUATORS A-PHYSICAL
(2021)
Review
Nanoscience & Nanotechnology
Guo Liang Goh et al.
Summary: Electrochemical impedance spectroscopy (EIS) is widely used in chemical and bio-sensing applications, with the design and material selection of printed electrode systems playing a crucial role in the successful application of EIS.
ADVANCED ELECTRONIC MATERIALS
(2021)
Article
Materials Science, Multidisciplinary
Mehdi Karimi et al.
Summary: This study used 3D printing and freeze-drying techniques to manufacture porous scaffolds, and through the study of mechanical and biological properties, it was found that the sample with 20wt% porosity exhibited excellent strength and biocompatibility. The conclusion indicates that the produced bio-nanocomposite scaffolds have potential application in tissue engineering.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
(2021)
Review
Engineering, Electrical & Electronic
Mohammad Reza Khosravani et al.
SENSORS AND ACTUATORS A-PHYSICAL
(2020)
Article
Chemistry, Analytical
Tibor Barsi Palmic et al.
Article
Polymer Science
Chuntian Chen et al.
Article
Automation & Control Systems
ChaBum Lee et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
(2019)
Article
Engineering, Electrical & Electronic
Sophia Esslinger et al.
SENSORS AND ACTUATORS A-PHYSICAL
(2018)
Article
Instruments & Instrumentation
Hoejin Kim et al.
SMART MATERIALS AND STRUCTURES
(2017)
Article
Engineering, Electrical & Electronic
Satu (Nee Karki) Rajala et al.
IEEE SENSORS JOURNAL
(2016)
Article
Engineering, Chemical
Shuaijie Wang et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
(2015)
Article
Engineering, Biomedical
P. Laszczak et al.
MEDICAL ENGINEERING & PHYSICS
(2015)
Review
Engineering, Chemical
Anjana Jain et al.
POLYMER ENGINEERING AND SCIENCE
(2015)
Article
Mechanics
J. Schoeftner et al.
COMPOSITE STRUCTURES
(2014)
Article
Physics, Applied
Suresha K. Mahadeva et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS
(2013)
Article
Instruments & Instrumentation
G. Buchberger et al.
SMART MATERIALS AND STRUCTURES
(2013)
Article
Chemistry, Multidisciplinary
Sung Yun Chung et al.
ADVANCED MATERIALS
(2012)
Article
Chemistry, Multidisciplinary
Minbaek Lee et al.
ADVANCED MATERIALS
(2012)
Article
Chemistry, Analytical
Fei Li et al.
