相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Chemical grafting fluoropolymer on cellulose nanocrystals and its rheological modification to perfluoropolyether oil
Sunan Wang et al.
CARBOHYDRATE POLYMERS (2022)
Development and optical 3D printing of acrylated epoxidized soybean oil-based composites with functionalized calcium silicate hydrate filler derived from aluminium fluoride production waste
Migle Lebedevaite et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)
Effect of Different Filler Contents and Printing Directions on the Mechanical Properties for Photopolymer Resins
Tamaki Hada et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)
3D-printed polylactide/hydroxyapatite/titania composite filaments
Mikail Olam et al.
MATERIALS CHEMISTRY AND PHYSICS (2022)
Rheological properties and 3D-printability of cellulose nanocrystals/deep eutectic solvent electroactive ion gels
Vitaly K. Vorobiov et al.
CARBOHYDRATE POLYMERS (2022)
New Segmented Poly(Thiourethane-Urethane)s Based on Poly(ε-Caprolactone)Diol Soft Segment: Synthesis and Characterization
Andrzej Puszka et al.
MATERIALS (2022)
Direct Ink Writing of Phenylethynyl End-Capped Oligoimide/SiO2 to Additively Manufacture High-Performance Thermosetting Polyimide Composites
Keda Li et al.
POLYMERS (2022)
Effect of Cellulose Nanofibers' Structure and Incorporation Route in Waterborne Polyurethane-Urea Based Nanocomposite Inks
Izaskun Larraza et al.
POLYMERS (2022)
Polydopamine and Mercapto Functionalized 3D Carbon Nano-Material Hybrids Synergistically Modifying Aramid Fibers for Adhesion Improvement
Zhonghang Fang et al.
POLYMERS (2022)
Direct ink writing of polycaprolactone/polyethylene oxide based 3D constructs
Bin Zhang et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2021)
3D printing for polymer/particle-based processing: A review
Weiheng Xu et al.
COMPOSITES PART B-ENGINEERING (2021)
Advances in Waterborne Polyurethane and Polyurethane-Urea Dispersions and Their Eco-friendly Derivatives: A Review
Arantzazu Santamaria-Echart et al.
POLYMERS (2021)
Waste office paper filled polylactic acid composite filaments for 3D printing
Yubo Tao et al.
COMPOSITES PART B-ENGINEERING (2021)
Direct ink writing of aloe vera/cellulose nanofibrils bio-hydrogels
Hossein Baniasadi et al.
CARBOHYDRATE POLYMERS (2021)
Interfacial adhesion quality in 3D printed continuous CF/PA6 composites at filament/matrix and interlaminar scales
Fabienne Touchard et al.
COMPOSITES PART B-ENGINEERING (2021)
Design of a Waterborne Polyurethane-Urea Ink for Direct Ink Writing 3D Printing
Julen Vadillo et al.
MATERIALS (2021)
Nature-Derived Amphiphilic Polymers Crosslinked by Calcium Ions for Microencapsulation Applications
Min Nie et al.
ACS APPLIED POLYMER MATERIALS (2021)
Direct ink writing of energy materials
S. Tagliaferri et al.
MATERIALS ADVANCES (2021)
Influence of the addition of PEG into PCL-based waterborne polyurethane-urea dispersions and films properties
Julen Vadillo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Direct ink writing of surface-modified flax elastomer composites
Yizhou Jiang et al.
COMPOSITES PART B-ENGINEERING (2020)
Direct Ink Writing Based 4D Printing of Materials and Their Applications
Xue Wan et al.
ADVANCED SCIENCE (2020)
Bio-based waterborne polyurethanes reinforced with cellulose nanocrystals as coating films
M. Eugenia Hormaiztegui et al.
PROGRESS IN ORGANIC COATINGS (2020)
Hydrogels based on waterborne poly(urethane-urea)s by physically cross-linking with sodium alginate and calcium chloride
Inigo Diez-Garcia et al.
CARBOHYDRATE POLYMERS (2020)
Alginate hydrogel dressings for advanced wound management
Miao Zhang et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
A waterborne polyurethane 3D scaffold containing PLGA with a controllable degradation rate and an anti-inflammatory effect for potential applications in neural tissue repair
Bohong Du et al.
JOURNAL OF MATERIALS CHEMISTRY B (2020)
Composites of waterborne polyurethane and cellulose nanofibers for 3D printing and bioapplications
Ren-De Chen et al.
CARBOHYDRATE POLYMERS (2019)
Advanced Polymer Designs for Direct-Ink-Write 3D Printing
Longyu Li et al.
CHEMISTRY-A EUROPEAN JOURNAL (2019)
Thermal degradation of calcium and sodium alginate: A greener synthesis towards calcium oxide micro/nanoparticles
Patricia dos Santos Araujo et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
3D printing with 2D colloids: designing rheology protocols to predict printability' of soft-materials
Andrew Corker et al.
SOFT MATTER (2019)
An alternative approach for the incorporation of cellulose nanocrystals in flexible polyurethane foams based on renewably sourced polyols
Lorena Ugarte et al.
INDUSTRIAL CROPS AND PRODUCTS (2017)
The use of cellulose nanocrystals to enhance the thermal insulation properties and sustainability of rigid polyurethane foam
Athanasia A. Septevani et al.
INDUSTRIAL CROPS AND PRODUCTS (2017)
Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing
Amin M'Barki et al.
SCIENTIFIC REPORTS (2017)
PLA short sub-micron fiber reinforcement of 3D bioprinted alginate constructs for cartilage regeneration
Alicja Kosik-Koziol et al.
BIOFABRICATION (2017)
Novel bioceramic-reinforced hydrogel for alveolar bone regeneration
Giorgio Iviglia et al.
ACTA BIOMATERIALIA (2016)
Three-Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications
Rouhollah D. Farahani et al.
ADVANCED MATERIALS (2016)
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Hyun-Wook Kang et al.
NATURE BIOTECHNOLOGY (2016)
Bio-based polyurethane reinforced with cellulose nanofibers: A comprehensive investigation on the effect of interface
Karima Benhamou et al.
CARBOHYDRATE POLYMERS (2015)
Critical parameters in designing segmented polyurethanes and their effect on morphology and properties: A comprehensive review
Iskender Yilgor et al.
POLYMER (2015)
Microstructural and mechanical properties of porous biocomposite scaffolds based on polyvinyl alcohol, nano-hydroxyapatite and cellulose nanocrystals
Anuj Kumar et al.
CELLULOSE (2014)
Morphology-Properties Relationship in High-Renewable Content Polyurethanes
L. Ugarte et al.
POLYMER ENGINEERING AND SCIENCE (2014)
Calcium-Mediated Secondary Cross-Linking of Bisphosphonated Oligo(poly(ethylene glycol) Fumarate) Hydrogels
M. Reza Nejadnik et al.
MACROMOLECULAR BIOSCIENCE (2013)
Controlling the Rate of Water-Induced Switching in Mechanically Dynamic Cellulose Nanocrystal Composites
Koffi L. Dagnon et al.
MACROMOLECULES (2013)
Polyurethane foams based on modified tung oil and reinforced with rice husk ash II: Mechanical characterization
Virginia Ribeiro da Silva et al.
POLYMER TESTING (2013)
Preparation, mechanical properties and surface morphologies of waterborne fluorinated polyurethane-acrylate
Yingying Wang et al.
PROGRESS IN ORGANIC COATINGS (2013)
Biofabrication of multi-material anatomically shaped tissue constructs
Jetze Visser et al.
BIOFABRICATION (2013)
Carbon Nanotube Reinforced Hybrid Microgels as Scaffold Materials for Cell Encapsulation
Su Ryon Shin et al.
ACS NANO (2012)
Synthesis and characterization of calcium alginate nanoparticles, sodium homopolymannuronate salt and its calcium nanoparticles
H. Daemi et al.
SCIENTIA IRANICA (2012)
Bioinspired Mechanically Adaptive Polymer Nanocomposites with Water-Activated Shape-Memory Effect
Julie Mendez et al.
MACROMOLECULES (2011)
Effect of Solvent Composition on Porosity, Surface Morphology and Thermal Behavior of Metal Alginate Prepared from Algae (Undaria pinnatifida)
Tara Sankar Pathak et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2010)
Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties
J. L. Zhang et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2010)
Hydrogels for Soft Machines
Paul Calvert
ADVANCED MATERIALS (2009)
Quantitative IR characterization of urea groups in waterborne polyurethanes
Ying Shi et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2008)
Effect of cross-linking with calcium ions on the physical properties of alginate films
R. Russo et al.
BIOMACROMOLECULES (2007)
Synthesis and properties of waterborne polyurethane dispersions with ions in the soft segments
Li-Hong Bao et al.
JOURNAL OF POLYMER RESEARCH (2006)
Direct ink writing of three-dimensional ceramic structures
Jennifer A. Lewis et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)
Effects of Ca2+ crosslinking on structure and properties of waterborne polyurethane-carboxymethylated guar gum films
Yihong Huang et al.
CARBOHYDRATE POLYMERS (2006)
Phase separation of diamine chain-extended poly(urethane) copolymers: FTIR spectroscopy and phase transitions
JT Garrett et al.
POLYMER (2003)