☆ 4.7 Article

Ferrocene-Based Terpolyamides and Their PDMS-Containing Block Copolymers: Synthesis and Physical Properties

POLYMERS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

New polyamides based on diacid with decanediamide and methylene groups and aromatic diamines

Arati V. Diwate et al.

Summary: A new aromatic diacid was successfully synthesized and a series of new polyamides were prepared via reactions with commercial aromatic diamines. These polyamides exhibited good physical properties and thermal stability, and can dissolve in specific organic solvents.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Polymer Science

Surface, structural, and thermal properties of polydimethylsiloxane-based polyurethanes and their blends with thermoplastic polyurethane elastomer

Tamara Erceg et al.

Summary: Two series of polyurethanes were synthesized and used to prepare blends with commercial polyurethane. Some synthesized samples acted as plasticizers, improving the mechanical properties and hydrophobicity of the materials.

POLYMER BULLETIN (2022)

添加到收藏夹

Article Chemistry, Physical

Polydimethylsiloxane-based Polyurethane/cellulose Nanocrystal Nanocomposites: From Structural Properties Toward Cytotoxicity

Parinaz Khadivi et al.

Summary: In this study, PU/CNC nanocomposites were fabricated through in-situ polymerization, and it was found that the addition of CNCs affected the thermophysical properties of the nanocomposites. Additionally, PU/CNC nanocomposites exhibited relatively cytotoxic behavior at higher concentrations.

SILICON (2022)

添加到收藏夹

Article Polymer Science

Porous Organic Polymers Derived from Ferrocene and Tetrahedral Silicon-Centered Monomers for Carbon Dioxide Sorption

Xingya Zhao et al.

Summary: In this study, two novel ferrocene-containing porous organic polymers, FPOP-1 and FPOP-2, were synthesized via Heck reactions. These materials exhibited high thermal stability and moderate porosity. They showed high affinity towards CO2 and can be potentially used for CO2 storage or capture.

POLYMERS (2022)

添加到收藏夹

Article Polymer Science

Facile Synthesis of Ferrocene-Based Polyamides and Their Organic Analogues Terpolyamides: Influence of Aliphatic and Aromatic Sequences on Physico-Chemical Characteristics

Tehmina Khan et al.

Summary: Efforts have been made to synthesize and characterize processable polymers with desired properties. In this study, four different series of aromatic and aliphatic terpolyamides were prepared through solution phase polycondensation reaction of 4,4'-oxydianiline and hexamethylenediamine with various diacids chlorides. The structural, morphological and physico-chemical properties of the synthesized polymers were investigated using different characterization techniques. The effect of varying concentrations of aliphatic diamine on the properties of polyamides was also studied.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2022)

添加到收藏夹

Review Polymer Science

Thin film composite membranes for postcombustion carbon capture: Polymers and beyond

Min Liu et al.

Summary: This review provides an overview of trends in the materials science of thin film composite (TFC) membranes for CO2 capture from flue gas. It explores different materials and synthetic approaches and compares the performance and technical limitations of the latest TFC membranes. The outstanding challenges and opportunities for future research directions are also discussed.

PROGRESS IN POLYMER SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Direct Synthesis of Thermally Stable Semiaromatic Polyamides by Bulk Polymerization Using Aromatic Diamines and Aliphatic Dicarboxylic Acids

Taiki Endo et al.

Summary: Semiaromatic polyamides were synthesized by bulk polycondensation, and copolyamides were successfully obtained. The obtained polyamides had high inherent viscosity and good thermal stability, and some copolyamides were suitable for melt-drawing processes.

ACS OMEGA (2022)

添加到收藏夹

Article Engineering, Biomedical

Properties and Applications of PDMS for Biomedical Engineering: A Review

Ines Miranda et al.

Summary: This review provides an overview of the properties of PDMS and its applications in the field of micro and nanoengineering. PDMS is widely used in biomedical applications due to its excellent optical, electrical, and mechanical properties, as well as biocompatibility. The introduction of the soft-lithography technique has facilitated the rapid prototyping of micro and nanostructures using PDMS, leading to advances in microfluidics, electronics, and biomedicine.

JOURNAL OF FUNCTIONAL BIOMATERIALS (2022)

添加到收藏夹

Article Polymer Science

Synthesis, properties, and degradation behaviors of novel polysulfone-polysiloxane multi-block copolymers

Mengdong Guo et al.

Summary: The study introduces a novel method for synthesizing polysulfone-polysiloxane multi-block copolymers, which exhibit high hydrolytic and thermal-oxidative stability. It was found that the surface and fluorescence properties of the copolymers can be effectively tuned by varying the PSS content, and the prepared copolymers have a relatively low PDI.

POLYMER (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrasoft and High-Mobility Block Copolymers for Skin-Compatible Electronics

Kristina Ditte et al.

Summary: A new triblock copolymer was developed by connecting PDPP-TT and PDMS, achieving high charge carrier mobility and low modulus, with excellent stretchability and durability.

ADVANCED MATERIALS (2021)

添加到收藏夹

Review Polymer Science

Surface and interface modification of aramid fiber and its reinforcement for polymer composites: A review

Bo Zhang et al.

Summary: Aramid fiber is widely used in composites reinforcement due to its excellent properties, but its surface limits its applications. Surface modification methods have been conducted to improve the adhesion between fiber and matrix. This review summarizes the recent progress of different surface modification methods of aramid fiber and its reinforcement to polymers, discussing existing problems and future research prospects.

EUROPEAN POLYMER JOURNAL (2021)

添加到收藏夹

Article Polymer Science

Functionalize Aramid Fibers with Polydopamine to Possess UV Resistance

Mingzhuan Li et al.

Summary: This study introduces a novel method to enhance the surface activity and UV resistance of aramid fibers by UV radiation and dopamine functionalization. The results showed significant improvements in the surface properties of the fibers, indicating the potential for further research and application in this area.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Synthesis of Magnetic Ferrocene-Containing Polymer with Photothermal Effects for Rapid Degradation of Methylene Blue

Wenhui Zhu et al.

Summary: A novel ferrocene-containing polymer with both magnetism and photothermal properties was synthesized in this study. The polymer showed high photo-thermocatalytic activity, with a degradation rate of 99.5% for methylene blue under an 808 nm laser within 15 minutes. These findings suggest a promising approach for degrading organic pollutants using this polymer.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

Recent Advances in Functional Polymer Materials for Energy, Water, and Biomedical Applications: A Review

Yassine EL-Ghoul et al.

Summary: Research on polymeric materials has made valuable and continuous advancements, with great potential for exciting new applications in the field of polymer science and engineering. Key factors driving progress in polymer applications include research, development, and industrial support.

POLYMERS (2021)

添加到收藏夹

Article Thermodynamics

Synthesis of poly(2-(methacryloyloxy) ethyl ferrocene carboxylate-co-glycidyl methacrylic acid)s and their anti-migration and burning rate catalytic properties

Muhammad Usman et al.

Summary: Poly(2-(methacryloyloxy) ethyl ferrocene carboxylate-co-glycidyl methacrylic acid) copolymers were synthesized to overcome the migration issue of ferrocene-based burning rate catalysts during storage and enhance the burning rate of ammonium perchlorate-based propellants. The copolymers showed redox behavior due to the presence of ferrocene units and exhibited good anti-migration performance with integrated network structures. Additionally, they demonstrated competent catalytic effects on the thermal decomposition of ammonium perchlorate.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Biology

Evaluating Alternatives to Water as Solvents for Life: The Example of Sulfuric Acid

William Bains et al.

Summary: The study analyzes the potential of concentrated sulfuric acid as a solvent for biochemistry, finding stable chemicals in Venus's sulfuric acid clouds that may support the origin of life. However, hypothetical routes to the origin of life on Earth are unlikely to operate in concentrated sulfuric acid. Additional research is needed to identify a plausible path for life to originate in this solvent.

LIFE-BASEL (2021)

添加到收藏夹

Article Chemistry, Applied

A multi-functional coating based on acrylic copolymer modified with PDMS through copolymerization

Sha Ji et al.

Summary: The copolymerization of PDMS and acrylic monomers synthesized acrylic-PDMS copolymers with stable dispersion particles in water, suitable for water-based coatings. The incorporation of PDMS segments led to flexible copolymer chains, decreased surface energy, and enhanced anti-corrosion performance.

PROGRESS IN ORGANIC COATINGS (2021)

添加到收藏夹

Review Chemistry, Applied

Recent advancements in the application of new monomers and membrane modification techniques for the fabrication of thin film composite membranes: A review

Javad Farahbakhsh et al.

Summary: Thin film composite (TFC) membranes have been improved through modifications in materials, such as the use of alternative monomers like MPD, PIP and TMC, which contribute to enhancing the physicochemical properties and separation efficiency of the membranes.

REACTIVE & FUNCTIONAL POLYMERS (2021)

添加到收藏夹

Review Biochemical Research Methods

Conventional and emerging strategies for the fabrication and functionalization of PDMS-based microfluidic devices

Amid Shakeri et al.

Summary: Microfluidics, particularly using polymeric materials like PDMS, offers unique advantages for developing commercial applications, but challenges in commercializing PDMS due to cost and surface modification complexities persist.

LAB ON A CHIP (2021)

添加到收藏夹

Article Polymer Science

Sulfur's role in the flame retardancy of thio-ether-linked hyperbranched polyphosphoesters in epoxy resins

Alexander Battig et al.

EUROPEAN POLYMER JOURNAL (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis of Tri-Aryl Methane Epoxy Resin Isomers and Their Cure with Aromatic Amines

Larry Q. Reyes et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2020)

添加到收藏夹

Article Engineering, Chemical

Simultaneous Improvement of the Processability and Mechanical Properties of Polyamide-6 by Chain Extension in Extrusion

Jianan Cai et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

添加到收藏夹

Review Chemistry, Inorganic & Nuclear

Supramolecular redox-responsive ferrocene hydrogels and microgels

Xiong Liu et al.

COORDINATION CHEMISTRY REVIEWS (2020)

添加到收藏夹

Article Materials Science, Composites

Enhanced mechanical and tribological properties of Kevlar/PTFE-phenoliccomposites by improving interfacial properties by aramid nanofibers

Mingming Yang et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Review Chemistry, Inorganic & Nuclear

Self-healing and shape memory metallopolymers: state-of-the-art and future perspectives

Gulzhian Dzhardimatieva et al.

DALTON TRANSACTIONS (2020)

添加到收藏夹

Article Engineering, Chemical

Synthesis and properties of polytriazoleimide containing anthracene, pyridine and 1, 2, 3-triazole groups and their nanocomposites with titanium dioxide

Rukmanikrishnan Balasubramanian et al.

POLYMER ENGINEERING AND SCIENCE (2019)

添加到收藏夹

Article Polymer Science

Aqueously soluble semi-aromatic copolyamides with dual-functional groups as sizing agent

X. Qi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Metallopolymers for advanced sustainable applications

Yanlan Wang et al.

CHEMICAL SOCIETY REVIEWS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis and gas transport properties of polyamide membranes containing PDMS groups

Liexiang Ren et al.

RSC ADVANCES (2019)

添加到收藏夹

Review Engineering, Chemical

Functionalized Aramid Fibers and Composites for Protective Applications: A Review

Prakash M. Gore et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

添加到收藏夹

Article Polymer Science

Application of laser light scattering to the determination of molecular weight, second virial coefficient, and radius of gyration of chitosan

Mohamed E. Shaheen et al.

POLYMER (2018)

添加到收藏夹

Article Polymer Science

Ferrocene Based Azo Chromophore Functionalized Polyesters and Its Organic Analogue: Synthesis, Structural Elucidation, Thermal Behavior and IV Characterization

Kalsoom Fatima et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2017)

添加到收藏夹

Review Polymer Science

Functional Aromatic Polyamides

Jose A. Reglero Ruiz et al.

POLYMERS (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Polymers with pendant ferrocenes

Rudolf Pietschnig

CHEMICAL SOCIETY REVIEWS (2016)

添加到收藏夹

Article Polymer Science

Study on thermal, spectroscopic and electrochemical behavior of some ferrocene-containing organometallic polyesteramides and their siloxane-based block copolymers

Muhammad Saif Ullah Khan et al.

JOURNAL OF POLYMER RESEARCH (2016)

添加到收藏夹

Article Polymer Science

Processability of Polysulfone Improved by Adding Polyamide 6 and Polysulfone-Polyamide 6 Block Copolymer

Gan Lin et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Synthesis, characterization and morphological studies of some novel siloxane-based block copolymeric materials containing organometallic as well as organic polyesteramides

Muhammad Saif Ullah Khan et al.

JOURNAL OF ORGANOMETALLIC CHEMISTRY (2013)

添加到收藏夹

Article Polymer Science

Study on the preparation and properties of novel block copolymeric materials based on structurally modified organometallic as well as organic polyamides and polydimethylsiloxane

Muhammad Saif Ullah Khan et al.

POLYMER INTERNATIONAL (2013)

添加到收藏夹

Article Polymer Science

Direct synthesis and melt-drawing property of aramids by bulk polycondensation of isophthalic acid with m-phenylenediamine and 3,4'-oxydianiline

Tomoya Higashihara et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

添加到收藏夹

Article Polymer Science

Synthesis of Aramids by Polycondensation of Aromatic Dicarboxylic Acids with Aromatic Diamines Containing Ether Linkages

Yu Shoji et al.

POLYMER JOURNAL (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.