☆ 4.7 Article

Performance Simulation and Fused Filament Fabrication Modeling of the Wave-Absorbing Structure of Conductive Multi-Walled Carbon Nanotube/Polyamide 12 Composite

POLYMERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Multidisciplinary

Dimensional Design and Core-Shell Engineering of Nanomaterials for Electromagnetic Wave Absorption

Zhengchen Wu et al.

Summary: Electromagnetic wave absorption materials with core-shell structures can enhance performance through interfacial polarization, conduction networks, magnetic coupling, and magnetic-dielectric synergy. This review outlines the recent advances in low-dimensional core-shell electromagnetic wave absorption materials and discusses notable examples. Key information regarding dimensional design, structural engineering, performance, and structure-function relationship is comprehensively summarized.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Broadband radar-absorbing performance of square-hole structure

Wen Wang et al.

Summary: This paper introduces a radar-absorbing material with a square pore structure prepared by 3D printing and coating dipping methods, and conducts a gradient optimization design of sheet resistance for the structure, showing that gradient design can improve radar-absorbing performance.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Three-Dimensional Printed Polyamide 12 (PA12) and Polylactic Acid (PLA) Alumina (Al2O3) Nanocomposites with Significantly Enhanced Tensile, Flexural, and Impact Properties

Markos Petousis et al.

Summary: This study reports the effects of adding aluminum oxide nanoparticles as reinforcing agents in Polyamide 12 and Polylactic acid in fused filament fabrication. The nanoparticles demonstrated positive reinforcement mechanism and achieved maximum performance improvement at specific filler loadings.

NANOMATERIALS (2022)

添加到收藏夹

Article Engineering, Chemical

Thin Film Composite Polyamide (TFC-PA) total heat exchange membranes (THEMs) with ultrahigh sensible heat recovery and greatly improved CO2 barrier property

Xian Chang et al.

Summary: Thin film composite polyamide total heat exchange membranes with high efficiency heat and enthalpy exchange and CO2 barrier properties were successfully prepared. The performance of the membranes could be controlled by adjusting various parameters. Improving surface hydrophilicity and reducing cross-linking degrees can enhance water permeation coefficient, while retaining more counter ions can improve CO2 barrier properties.

JOURNAL OF MEMBRANE SCIENCE (2022)

添加到收藏夹

Review Chemistry, Physical

Review on the electromagnetic interference shielding properties of carbon based materials and their novel composites: Recent progress, challenges and prospects

Nannan Wu et al.

Summary: The rapid development of electronic devices has raised concerns about electromagnetic radiation issues, and the most effective way to address electromagnetic pollution is to fabricate electromagnetic interference shielding materials and microwave absorption materials with lightweight and strong attenuation abilities. Carbon nanocomposites have attracted attention in the field of electromagnetic interference shielding due to their low density, natural abundance, easy preparation, excellent conductivity, and flexibility. Recent advancements in carbon materials as ESMs/MAMs have shown that 3D carbon materials and novel composites have the potential to enhance electromagnetic interference shielding efficiency.

CARBON (2021)

添加到收藏夹

Article Biology

Electromagnetic pollution alert: Microwave radiation and absorption in human organs and tissues

Nantakan Wongkasem

Summary: This research analyzed electromagnetic propagation and properties in 14 human organs and tissues based on their electromagnetic and mechanical parameters, and chemical composition. The study found that the absorbance in all organs and tissues significantly increases as frequency increases, with the wavelength shortening due to high organ-tissue permittivity. Results show that electromagnetic waves vanish before passing the brain layer in human body models at specific frequencies.

ELECTROMAGNETIC BIOLOGY AND MEDICINE (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of Calcination Temperature on the Phase Composition, Morphology, and Thermal Properties of ZrO2 and Al2O3 Modified with APTES (3-aminopropyltriethoxysilane)

Damian S. Nakonieczny et al.

Summary: This paper investigates the impact of calcination temperature on the phase composition, chemical composition, and morphology of ZrO2 and Al2O3 powders modified with APTES. Characterization of the modified powders was conducted using various analytical techniques to gain insights into the effects of different calcination temperatures.

MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Alumina and Zirconia-Reinforced Polyamide PA-12 Composites for Biomedical Additive Manufacturing

Damian S. Nakonieczny et al.

Summary: This work focused on preparing composites with a polyamide matrix and surface-modified ZrO2 or Al2O3 for potential applications in bioengineering, specifically in dental prosthetics and orthopaedics. The ceramic fillers underwent chemical surface modifications to enhance surface development and introduce additional functional groups, aiming to improve bonding with the polymer matrix. The manufactured filaments were used in 3D FDM printing and subjected to various tests, including mechanical properties and durability evaluations.

MATERIALS (2021)

添加到收藏夹

Review Engineering, Electrical & Electronic

Recent advances in electromagnetic interference shielding properties of carbon-fibre-reinforced polymer composites-a topical review

E. Mikinka et al.

Summary: This state-of-the-art review summarises recent research advancements in the field of electromagnetic shielding properties of CFRP composites, focusing on experimental work and important parameters affecting performance. It emphasizes the strong link between processing conditions and the shielding properties of the composite.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Structural Design Strategies of Polymer Matrix Composites for Electromagnetic Interference Shielding: A Review

Chaobo Liang et al.

Summary: With the widespread application of electronic communication technology, the concern for electromagnetic radiation pollution has increased. Metal matrix EMI shielding materials have issues, while polymer matrix EMI shielding composites have natural advantages but need to improve performance.

NANO-MICRO LETTERS (2021)

添加到收藏夹

Article Crystallography

Microwave Absorption Performance of Single-Layer and Multi-Layer Structures Prepared by CNTs/Fe3O4 Nonwoven Materials

Rong Zhan et al.

Summary: In this study, wearable flexible absorbing materials were prepared using carbon nanotubes (CNTs) and Fe3O4 nonwovens. Experiment results showed that single-layer hot-rolled nonwovens modified by CNTs exhibited the best wave absorbing performance at 10.55 GHz. Additionally, the position of the absorbing film and the type of absorbing fillers also had an impact on the absorbing performance of multi-layer structures.

CRYSTALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

4D printing of materials for the future: Opportunities and challenges

Siddharth Joshi et al.

APPLIED MATERIALS TODAY (2020)

添加到收藏夹

Article Polymer Science

Different Approaches to Oxygen Functionalization of Multi-Walled Carbon Nanotubes and Their Effect on Mechanical and Thermal Properties of Polyamide 12 Based Composites

Magdalena Kwiatkowska et al.

POLYMERS (2020)

添加到收藏夹

Article Polymer Science

Electromagnetic Wave Absorption Properties of Structural Conductive ABS Fabricated by Fused Deposition Modeling

Wenwen Lai et al.

POLYMERS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Multiwalled carbon nanotube pretreatment to enhance tensile properties, process stability, and filler dispersion of polyamide 66 nanocomposites

Seonku Kang et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Polymer Science

Effects of Carbonyl Iron Powder (CIP) Content on the Electromagnetic Wave Absorption and Mechanical Properties of CIP/ABS Composites

Wenwen Lai et al.

POLYMERS (2020)

添加到收藏夹

Review Polymer Science

Self-Healing Mechanisms for 3D-Printed Polymeric Structures: From Lab to Reality

Mohammed Dukhi Almutairi et al.

POLYMERS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems

S. C. Daminabo et al.

MATERIALS TODAY CHEMISTRY (2020)

添加到收藏夹

Article Materials Science, Composites

Additive manufacturing of carbon nanotube-photopolymer composite radar absorbing materials

Yuanyuan Zhang et al.

POLYMER COMPOSITES (2018)

添加到收藏夹

Article Chemistry, Physical

Strong and thermostable SiC nanowires/graphene aerogel with enhanced hydrophobicity and electromagnetic wave absorption property

Yehong Cheng et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Facile growth of coaxial Ag@polypyrrole nanowires for highly tunable electromagnetic waves absorption

Aming Xie et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Review Engineering, Manufacturing

Recent advances in electromagnetic interference shielding properties of metal and carbon filler reinforced flexible polymer composites: A review

Sowmya Sankaran et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

添加到收藏夹

Review Engineering, Multidisciplinary

3D printing of polymer matrix composites: A review and prospective

Xin Wang et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Composites

Microwave absorbing properties of alternating multilayer composites consisting of poly (vinyl chloride) and multi-walled carbon nanotube filled poly (vinyl chloride) layers

Xiaoyan Gao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

3D printing with polymers: Challenges among expanding options and opportunities

Jeffrey W. Stansbury et al.

DENTAL MATERIALS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Materials perspective of polymers for additive manufacturing with selective laser sintering

Manfred Schmid et al.

JOURNAL OF MATERIALS RESEARCH (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling

M. Nikzad et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.