☆ 4.7 Article

Bulk Polymerization of Thermoplastic Shape Memory Epoxy Polymer for Recycling Applications

POLYMERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

4D Printing-Encapsulated Polycaprolactone-Thermoplastic Polyurethane with High Shape Memory Performances

Davood Rahmatabadi et al.

Summary: In this study, bilayer-encapsulated polycaprolactone-thermoplastic polyurethane shape memory composite structures were successfully 4D printed with improved shape memory effect compared to previous SMP structures. The encapsulation solved the bonding/interface challenge between printed layers and resulted in higher performance. The maximum stress recovery in 4D-printed composites remained constant over time, indicating enhanced durability compared to extrusion-based SMP structures.

ADVANCED ENGINEERING MATERIALS (2023)

添加到收藏夹

Article Engineering, Multidisciplinary

Multifunctional thermo-magnetically actuated hybrid soft millirobot based on 4D printing

Xingyue Hu et al.

Summary: A novel smart hydrogel with good mechanical properties, excellent machinability, and biocompatibility was synthesized for 4D printing of soft robots. Soft millirobots with different structures and functions were printed successfully and demonstrated response to both magnetic and thermal fields.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Polymer Science

Heat-stimuli controllability of shape memory thermoplastic epoxy filaments by adding polyethylene glycol

Baoji Hu et al.

Summary: This study innovatively endowed thermoplastic epoxy (TEP) with heat-stimuli controllability of shape memory function by adding PEG in an environmentally friendly way, solving the problems of difficult melt processing and uncontrollable stimuli temperature for TEP.

POLYMER (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A 4D-Printed Structure With Reversible Deformation for the Soft Crawling Robot

Guifang Duan et al.

Summary: This study illustrates the principle of reversible deformations for bilayer structures consisting of SMP and elastic material, and designs a low-cost reversible bilayer structure and a soft crawling robot. By force analysis and deformation process analysis, a wave-like strategy is proposed to actuate the robot.

FRONTIERS IN MATERIALS (2022)

添加到收藏夹

Article Polymer Science

A New Strategy for Achieving Shape Memory Effects in 4D Printed Two-Layer Composite Structures

Davood Rahmatabadi et al.

Summary: This study presents a new strategy and design for achieving a shape memory effect (SME) and 4D printing of two-layer composite structures using fused deposition modeling (FDM) biomaterial printing. The results show high fixity and recovery ratios, demonstrating the effectiveness of this approach.

POLYMERS (2022)

添加到收藏夹

Article Engineering, Manufacturing

4D printing of PET-G via FDM including tailormade excess third shape

E. Soleyman et al.

Summary: This paper investigates the 4D printing capability and shape memory effect of PETG as a novel shape memory thermoplastic. The results show that PETG exhibits different appearances and shape memory behaviors under different printing parameters.

MANUFACTURING LETTERS (2022)

添加到收藏夹

Article Polymer Science

Thermally and light-triggered reconfigurable shape memory polydopamine/epoxy composite with self-healing and recyclable ability

Haohao Lu et al.

Summary: This study developed a shape memory epoxy composite with self-healing ability by using 4-aminophenyl disulfide as a curing agent, which exhibited enhanced mechanical properties, exceptional shape memory properties, and temperature-dependent thermosetting and thermoplastic conversion capabilities. This composite can be programmed to a new permanent shape via a photothermal-induced plasticity process.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Development of thermoplastic epoxy filaments with shape memory properties

Baoji Hu et al.

Summary: This study developed a thermoplastic epoxy polymer and shape memory thermoplastic epoxy filament using an epoxy and phenol monomer mixture. The shape memory filament exhibited excellent shape memory performance and recovery stress, with potential applications in artificial muscles and smart textiles. The filament can reach an energy density during thermal actuation and shows promise when processed into textiles.

POLYMER TESTING (2021)

添加到收藏夹

Article Food Science & Technology

Investigation on spontaneous 4D changes in color and flavor of healthy 3D printed food materials over time in response to external or internal pH stimulus

Ahmed Fathy Ghazal et al.

Summary: This study investigated 4D changes in colors and flavors of 3D-printed healthy food products in response to pH stimulus, using multi-smart materials. Significant differences in color and flavor were observed under different pH conditions, highlighting the potential for manufacturing new 3D-printed food products with desired sensory characteristics.

FOOD RESEARCH INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hybrid hinge structure with elastic hinge on self-folding of 4D printing using a fused deposition modeling 3D printer

Shunsuke Yamamura et al.

Summary: A new hybrid hinge structure was proposed in this study to enable elastic folding deformation after 4D printing, with high durability and elasticity maintained even after 500 cycles of folding. The usefulness of the hybrid hinge was demonstrated through the fabrication of a miura-ori and an origami compliant mechanism gripper.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

4D Printing Dual Stimuli-Responsive Bilayer Structure Toward Multiple Shape-Shifting

Luquan Ren et al.

Summary: The study introduces a 4D printing strategy that responds to both temperature and water stimuli, using different printing materials to achieve diverse structural changes. With a systematic investigation of the printing parameters and programmable variables, this research offers a universal multiple stimuli-responsive 4D printing method to enhance the intelligent responsiveness of printing structures.

FRONTIERS IN MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

A review of shape memory polymers based on the intrinsic structures of their responsive switches

Lide Yang et al.

Summary: This paper summarizes the history and recent research progress of shape memory polymers (SMPs) as stimuli-responsive materials. The responsive switches are categorized and discussed based on their intrinsic structures, and the development and prospects of SMPs are objectively predicted.

RSC ADVANCES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Blended Reversible Epoxy Domains on Structures and Properties of Self-Healing/Shape-Memory Thermoplastic Polyurethane

Tianqi Chen et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

4D Printing of a Light-Driven Soft Actuator with Programmed Printing Density

Akihiro Nishiguchi et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Polymer Science

Multi-Material 3D Printed Shape Memory Polymer with Tunable Melting and Glass Transition Temperature Activated by Heat or Light

Ela Sachyani Keneth et al.

POLYMERS (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Advancing Toward 3D Printing of oresorbable Shape Memory Polymer Stents

Taylor R. Yeazel et al.

BIOMACROMOLECULES (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

Retentive device for intravesical drug delivery based on water-induced shape memory response of poly(vinyl alcohol): design concept and 4D printing feasibility

A. Melocchi et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dynamic Imine Bond-Based Shape Memory Polymers with Permanent Shape Reconfigurability for 4D Printing

Jia-Tao Miao et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Polymer Science

New zwitterionic polyurethanes containing pendant carboxyl-pyridinium with shape memory, shape reconfiguration, and self-healing properties

Xuan Xiao et al.

POLYMER (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Remotely and Sequentially Controlled Actuation of Electroactivated Carbon Nanotube/Shape Memory Polymer Composites

Yang Liu et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

添加到收藏夹

Article Engineering, Chemical

PEG-ran-PPG Modified Epoxy Thermosets: A Simple Approach To Develop Tough Shape Memory Polymers

Jyotishkumar Parameswaranpillai et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

添加到收藏夹

Article Materials Science, Biomaterials

Biodegradable Water-Based Polyurethane Shape Memory Elastomers for Bone Tissue Engineering

Yu-Jen Wang et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Biomaterials

Biodegradable Water-Based Polyurethane Shape Memory Elastomers for Bone Tissue Engineering

Yu-Jen Wang et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Photoactivated Polymeric Bilayer Actuators Fabricated via 3D Printing

Daniel E. Hagaman et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Polymer Science

Eugenol-Derived Biobased Epoxy: Shape Memory, Repairing, and Recyclability

Tuan Liu et al.

MACROMOLECULES (2017)

添加到收藏夹

Article Chemistry, Physical

Dual-action smart coatings with a self-healing superhydrophobic surface and anti-corrosion properties

Hongchang Qian et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

A Review on 3D Printed Smart Devices for 4D Printing

Jeongwoo Lee et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2017)

添加到收藏夹

Article Automation & Control Systems

3D printing of shape memory polymer for functional part fabrication

Yang Yang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Chemistry, Physical

Biomimetic 4D printing

A. Sydney Gladman et al.

NATURE MATERIALS (2016)

添加到收藏夹

Article Polymer Science

High strain epoxy shape memory polymer

Ning Zheng et al.

POLYMER CHEMISTRY (2015)

添加到收藏夹

Article Instruments & Instrumentation

Active origami by 4D printing

Qi Ge et al.

SMART MATERIALS AND STRUCTURES (2014)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.