Multi-objective Strength Optimization of Fused Filament Fabricated Complex Flexible Parts Using Grey Relational Analysis

Article Materials Science, Multidisciplinary

Effect of Fused Filament Fabrication Process Parameters on Compressive Strength of Thermoplastic Polyurethane and Polylactic Acid Lattice Structures

Nidhi Dixit et al.

Summary: Parametric optimization of the Fused Filament Fabrication (FFF) process using the Taguchi method was conducted to manufacture lattice structures with maximum compressive strength.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

添加到收藏夹

Article Engineering, Mechanical

Analysing the influence of raster angle, layer thickness and infill rate on the compressive behaviour of EVA through CNC-assisted fused layer modelling process

Narendra Kumar et al.

Summary: The study analyzes the compressive behavior of ethylene vinyl acetate specimens processed through extrusion-based additive manufacturing, finding that infill percentage is the most significant parameter for compressive strength. The empirical relation between input process parameters and compressive strength has been established and validated through comparison of predicted and experimental results, showing good conformity.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

An experimental study of FDM parameters effects on tensile strength, density, and production time of ABS/Cu composites

Mojtaba Nabipour et al.

Summary: The study focuses on producing composite sample parts using fused deposition modeling process with copper particles and acrylonitrile butadiene styrene granules, and investigates the impact of four printing parameters using the Taguchi method.

JOURNAL OF ELASTOMERS AND PLASTICS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Layer-to-layer physical characteristics and compression behavior of 3D printed polymer metastructures fabricated using different process parameters

Sivani Patibandla et al.

Summary: The influence of process parameters such as extrusion temperature and print speed on the physical and mechanical characteristics of 3D printed materials was investigated. It was found that print speed has minimal effect on mechanical properties, while higher fabrication temperature results in improved mechanical properties. Additionally, lower fabrication temperature leads to more uniform features within the layers.

JOURNAL OF ELASTOMERS AND PLASTICS (2021)

添加到收藏夹

Review Engineering, Manufacturing

Fused deposition modeling of thermoplastic elastomeric materials: Challenges and opportunities

Pratiksha Awasthi et al.

Summary: This review article summarizes the latest advancements in FDM 3D printing of thermoplastic elastomeric materials, focusing on the development of FDM compatible new materials and improving printability. Strategies to overcome defects in 3D printed TPE parts and enhance mechanical properties are provided, along with discussion on future prospects in this rapidly progressing field.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of layer thickness and cross-section geometry on the tensile and compression properties of 3D printed ABS

Junior Nomani et al.

MATERIALS TODAY COMMUNICATIONS (2020)

添加到收藏夹

Article Automation & Control Systems

Optimization of printing parameters in fused deposition modeling for improving part quality and process sustainability

Carmita Camposeco-Negrete

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Physical

Evaluating FDM Process Parameter Sensitive Mechanical Performance of Elastomers at Various Strain Rates of Loading

Muhammad Salman Chaudhry et al.

MATERIALS (2020)

添加到收藏夹

Review Polymer Science

FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments

Sachini Wickramasinghe et al.

POLYMERS (2020)

添加到收藏夹

Article Polymer Science

Research of TPU Materials for 3D Printing Aiming at Non-Pneumatic Tires by FDM Method

Jun Wang et al.

POLYMERS (2020)

添加到收藏夹

Article Materials Science, Composites

Effect of process parameters on mechanical properties of 3D printed PLA lattice structures

Can Tang et al.

COMPOSITES PART C: OPEN ACCESS (2020)

添加到收藏夹

Article Automation & Control Systems

Mechanical property of FDM printed ABS: influence of printing parameters

M. Samykano et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Review Polymer Science

Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing

Jana Herzberger et al.

PROGRESS IN POLYMER SCIENCE (2019)

添加到收藏夹

Article Engineering, Manufacturing

Compression and Energy Absorption Performances of 3D Printed Polylactic Acid Lattice Core Sandwich Structures

Gaoyuan Ye et al.

3D PRINTING AND ADDITIVE MANUFACTURING (2019)

添加到收藏夹

Article Engineering, Manufacturing

Investigation on the effects of process parameters in CNC assisted pellet based fused layer modeling process

Narendra Kumar et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

添加到收藏夹

Article Engineering, Manufacturing

Investigating the effect of fused deposition modeling processing parameters using Taguchi design of experiment method

Ala'aldin Alafaghani et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

添加到收藏夹

Article Automation & Control Systems

Mechanical property parametric appraisal of fused deposition modeling parts based on the gray Taguchi method

Xinhua Liu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Mechanics

Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures

Garrett W. Melenka et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Failure Analysis and Mechanical Characterization of 3D Printed ABS With Respect to Layer Thickness and Orientation

Behzad Rankouhi et al.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2016)

添加到收藏夹

Article Chemistry, Physical

Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS

Wenzheng Wu et al.

MATERIALS (2015)

添加到收藏夹

Article Materials Science, Composites

Selective Laser Sintering of Clay-Reinforced Polyamide

Prashant K. Jain et al.

POLYMER COMPOSITES (2010)

添加到收藏夹

Article Automation & Control Systems

Effect of delay time on part strength in selective laser sintering

Prashant K. Jain et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method

Anoop Kumar Sood et al.

MATERIALS & DESIGN (2009)

添加到收藏夹

Article Engineering, Manufacturing

Experimental investigations for improving part strength in selective laser sintering

Prashant K. Jain et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2008)

添加到收藏夹

Article Automation & Control Systems

Determination of optimum parameters for multi-performance characteristics in drilling by using grey relational analysis

N Tosun

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stress-strain behavior of thermoplastic polyurethanes

HJ Qi et al.

MECHANICS OF MATERIALS (2005)

添加到收藏夹

Article Engineering, Chemical

Rheology and extrusion of medical-grade thermoplastic polyurethane

GY Lu et al.

POLYMER ENGINEERING AND SCIENCE (2003)

添加到收藏夹

Multi-objective Strength Optimization of Fused Filament Fabricated Complex Flexible Parts Using Grey Relational Analysis

相关参考文献

导出引文

分享论文