☆ 4.6 Article

3D Printing and Performance Study of Porous Artificial Bone Based on HA-ZrO2-PVA Composites

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Biomedical

Bioactive Glass-Ceramic Scaffolds Coated with Hyaluronic Acid-Fatty Acid Conjugates: A Feasibility Study

Stefania De Luca et al.

Summary: This study investigates the coating of three-dimensional porous glass-derived scaffolds with hyaluronic acid (HA)-fatty acids for the first time. The scaffold's surface and struts were successfully coated with HA-palmitate and HA-oleate conjugates through a dipping procedure. In vitro tests showed that the deposition of the polymeric coating did not inhibit the apatite-forming ability of scaffolds, indicating the potential of these novel bioactive systems to promote bone healing.

JOURNAL OF FUNCTIONAL BIOMATERIALS (2023)

添加到收藏夹

Article Materials Science, Ceramics

Study of microstructural, mechanical, and biomedical properties of zirconia/hydroxyapatite ceramic composites

C. R. D. Ferreira et al.

Summary: In this study, hydroxyapatite was synthesized using the sol-gel method, and zirconia/hydroxyapatite composites were prepared. The mechanical properties of the composites and their interaction with bone tissue were evaluated using various characterization techniques.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Review Engineering, Mechanical

Hydroxyapatite composite scaffold for bone regeneration via rapid prototyping technique: a review

Fangfang Sun et al.

Summary: This review paper provides a comprehensive study of various types of HAp composite scaffold fabricated with RP technologies, introducing their potential applications in bone tissue engineering and discussing future research directions.

RAPID PROTOTYPING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Alkali-Treated Alumina and Zirconia Powders Decorated with Hydroxyapatite for Prospective Biomedical Applications

Damian S. Nakonieczny et al.

Summary: In this study, the alumina and zirconia surfaces were pretreated with chemical etching and coated with Ca-deficient hydroxyapatite. The effects of etching bath conditions on the surface properties and chemical composition of medicinal ceramic powders were investigated. The results showed that different etchants had varying effects on the morphology of the ceramic surfaces. The aim of this study was to provide insights for the development of dental prosthetics.

MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Effect of Hydroxyapatite Nanoparticles and Nitrogen Plasma Treatment on Osteoblast Biological Behaviors of 3D-Printed HDPE Scaffold for Bone Tissue Regeneration Applications

Hyunchul Park et al.

Summary: This study investigated the effects of adding nano-hydroxyapatite (n-HAp) particles and treating with nitrogen plasma on the biological response of preosteoblast cells. The results showed that the incorporation of n-HAp particles and N-2 plasma surface treatment improved the biological responses of preosteoblast cells in the HDPE scaffolds.

MATERIALS (2022)

添加到收藏夹

Article Materials Science, Ceramics

Porous hydroxyapatite scaffold produced using Musa paradisiaca template and its in vitro bioactivity

Ahmad Fadli et al.

Summary: The study focused on the influence of varying amounts of HA on the physical properties and bioactivity of porous HA prepared using banana template. Results showed that parameters like shrinkage, density, porosity, and compressive strength of porous HA were significantly affected by HA content.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Engineering, Chemical

Adhesive bond integrity of silanized zirconia nanoparticles in polymeric resin dentin bonding agent. An FTIR, SEM, and micro-tensile experiment

Basil Almutairi et al.

Summary: This study synthesized and silanized zirconia oxide nanoparticles and incorporated them into dentin adhesive to investigate their mechanical and biological properties at the dentin-resin interface. The modified adhesive significantly increased bond integrity at the resin-dentin interface.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2022)

添加到收藏夹

Article Engineering, Biomedical

Design and analysis of the mechanical properties of controllable porous scaffolds for bone tissue engineering

Xiaokang Wang et al.

Summary: In this paper, a design method for porous scaffold used in bone defect repair is proposed based on Voronoi-Tessellation (VT) and random function theory. The method has high controllability and the generated porous scaffold has internal pore structures closer to natural bone tissue, meeting the requirements for artificial implants.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2022)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Accuracy of Fixed Implant-Supported Dental Prostheses Additively Manufactured by Metal, Ceramic, or Polymer: A Systematic Review

Vygandas Rutkunas et al.

Summary: This systematic review evaluated the accuracy of additively manufactured metal, ceramic, or polymer restorations and screw- or cement-retained fixed implant-supported prostheses. The study found that additive manufacturing restorations demonstrated similar accuracy compared to conventional and computer-aided techniques, and the marginal discrepancies of the additive manufactured prostheses were clinically acceptable.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2022)

添加到收藏夹

Article Polymer Science

3D-Printed, Dual Crosslinked and Sterile Aerogel Scaffolds for Bone Tissue Engineering

Ana Iglesias-Mejuto et al.

Summary: In this study, reinforced alginate-hydroxyapatite (HA) aerogel scaffolds were successfully fabricated for bone tissue engineering (BTE) applications by combining extrusion-based 3D-printing and supercritical CO2 gel drying. Intermediate and post-processing strategies such as gel ageing in CaCl2 solutions and glutaraldehyde (GA) chemical crosslinking were utilized to achieve highly crosslinked aerogel scaffolds. The resulting aerogels were dual porous, bio- and hemocompatible, and had high bioactivity dependent on the HA content, marking a significant advance towards optimizing advanced biomaterials and their sterilization.

POLYMERS (2022)

添加到收藏夹

Article Chemistry, Physical

Preparation of Collagen/Hydroxyapatite Composites Using the Alternate Immersion Method and Evaluation of the Cranial Bone-Forming Capability of Composites Complexed with Acidic Gelatin and b-FGF

Miki Hoshi et al.

Summary: Bone-substitute materials play a crucial role in dental implantology. This study explores the use of collagen/hydroxyapatite/acidic gelatin/basic fibroblast growth factor constructs to enhance bone formation. Animal experiments demonstrate that the constructs moderately increase bone formation in cranial bone defects. Immersion time of 20 minutes leads to the greatest bone formation.

MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of mechanical properties of UHMWPE composites reinforced with HAP?TiO2 fabricated by solvent dispersing technique

Ahmed Salama et al.

Summary: This study aims to address the issues of inadequate artificial joint design in total joint replacement surgery from a mechanical perspective. UHMWPE/HAP + TiO2 hybrid composites were fabricated and tested for use as artificial cartilages in total joint prostheses. The addition of TiO2 resulted in significant improvements in the mechanical properties of the composites.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Chemistry, Physical

Deformation, Failure, and Acoustic Emission Characteristics under Different Lithological Confining Pressures

Shuo Wu et al.

Summary: This study investigates the deformation and rock failure characteristics of deep well boring roadways under different surrounding pressure. The results show that the surrounding pressure significantly affects the damage deformation characteristics of the rock. The strength limit of the rock increases with the surrounding pressure, and the damage form of the rock gradually changes with an increase in surrounding pressure. The acoustic emission value sudden increase can be considered a precursor to rock destruction.

MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D printing of MXene composite hydrogel scaffolds for photothermal antibacterial activity and bone regeneration in infected bone defect models

Ran Nie et al.

Summary: This study developed a personalized MXene composite hydrogel scaffold GTAM for the repair of infected bone defects. The GTAM scaffold showed excellent photothermal antibacterial and osteogenic abilities and promoted the healing of infection and bone regeneration.

NANOSCALE (2022)

添加到收藏夹

Article Biophysics

Fabrication of oxygen and calcium releasing microcarriers with different internal structures for bone tissue engineering: Solid filled versus hollow microparticles

Elham Mohseni-Vadeghani et al.

Summary: In this study, researchers successfully prepared PLLA microspheres loaded with oxygen-generating biomaterials, preventing hypoxia and protecting cells from oxidative damage. Modified microsphere structures and catalase treatment stably released oxygen and calcium ions, preventing cytotoxicity, making it a promising injectable cell carrier system for bone tissue engineering.

COLLOIDS AND SURFACES B-BIOINTERFACES (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of Calcination Temperature on the Phase Composition, Morphology, and Thermal Properties of ZrO2 and Al2O3 Modified with APTES (3-aminopropyltriethoxysilane)

Damian S. Nakonieczny et al.

Summary: This paper investigates the impact of calcination temperature on the phase composition, chemical composition, and morphology of ZrO2 and Al2O3 powders modified with APTES. Characterization of the modified powders was conducted using various analytical techniques to gain insights into the effects of different calcination temperatures.

MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Positron Annihilation Lifetime Spectroscopy Insight on Free Volume Conversion of Nanostructured MgAl2O4 Ceramics

Halyna Klym et al.

Summary: This study demonstrates the use of positron annihilation lifetime spectroscopy (PALS) method for investigating free volume changes in functional ceramic materials, using nanostructured MgAl2O4 spinel as a case study. The analysis shows that technological modifications can lead to volume shrinking and decrease in defect-related voids in ceramics with well-developed porosity. The approach presented here can be applied to a wide range of functional nanomaterials with pronounced porosity.

NANOMATERIALS (2021)

添加到收藏夹

Article Crystallography

Simple Approach to Medical Grade Alumina and Zirconia Ceramics Surface Alteration via Acid Etching Treatment

Damian Stanislaw Nakonieczny et al.

Summary: The surface modification of bioceramic powders is crucial for enhancing their interaction with other materials, and is key to their successful incorporation into composites and applications.

CRYSTALS (2021)

添加到收藏夹

Review Engineering, Biomedical

Bone physiological microenvironment and healing mechanism: Basis for future bone-tissue engineering scaffolds

Guanyin Zhu et al.

Summary: Bone-tissue defects are a global issue, with autologous and allogeneic bone grafting failing to achieve ideal therapeutic effects. This has led researchers to explore novel bone-regeneration methods, with the development of BTE scaffolds at the forefront. By delving into bone physiology and healing mechanisms, biomimicking and bioinspired BTE scaffolds are making progress.

BIOACTIVE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Numerical Study of the Micro-Jet Formation in Double Flow Focusing Nozzle Geometry Using Different Water-Alcohol Solutions

Grega Belsak et al.

Summary: This study aims to determine if a mixture of binary liquids can produce longer, thinner, and faster gas-focused micro-jets compared to mono-constituent liquids. The research reveals that an optimal mixture for maximizing jet length exists in both water + ethanol and water + 2-propanol systems, with the latter showing a 34% increase in jet length. The study highlights the dominant effect of liquid viscosity on the jet breakup process in flow focusing nozzles operated under atmospheric conditions.

MATERIALS (2021)

添加到收藏夹

Article Anatomy & Morphology

Morphometric study of the knee joint in Saudi Arabian population based on magnetic resonance imaging scan

Daifallah Alharbi et al.

Summary: The study evaluated the geometric parameters of knee joints in Saudi male and female subjects, finding that Saudi females have smaller dimensions compared to Saudi males. A marked difference in dimensions was observed when compared with reports from other countries, suggesting a morphological mismatch between the knee anatomy of Saudi Arabia and other countries.

JOURNAL OF THE ANATOMICAL SOCIETY OF INDIA (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Selective laser sintered bio-inspired silicon-wollastonite scaffolds for bone tissue engineering

Nikhil Kamboj et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

添加到收藏夹

Article Materials Science, Biomaterials

Zirconia toughened hydroxyapatite biocomposite formed by a DLP 3D printing process for potential bone tissue engineering

Jiancheng Zhang et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Experimental Investigation using Taguchi Method to Optimize Process Parameters of Fused Deposition Modeling for ABS and Nylon Materials

M. Vishwas et al.

MATERIALS TODAY-PROCEEDINGS (2018)

添加到收藏夹

Article Thermodynamics

Experimental study of the hydrodynamic and heat transfer of air-assistant circular water jet impinging a flat circular disk

Brian K. Friedrich et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modified Hydroxyapatite Structure and Properties: Modeling and Synchrotron Data Analysis of Modified Hydroxyapatite Structure

A. V. Bystrova et al.

FERROELECTRICS (2015)

添加到收藏夹

Article Orthopedics

Effect of nano-hydroxyapatite coating on the osteoinductivity of porous biphasic calcium phosphate ceramics

Jianzhong Hu et al.

BMC MUSCULOSKELETAL DISORDERS (2014)

添加到收藏夹

Review Chemistry, Multidisciplinary

Scaffolds for bone tissue engineering: role of surface patterning on osteoblast response

Jaba Mitra et al.

RSC ADVANCES (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Poly (epsilon-caprolactone) nanofibrous ring surrounding a polyvinyl alcohol hydrogel for the development of a biocompatible two-part artificial cornea

Haleh Bakhshandeh et al.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2011)

添加到收藏夹

Article Engineering, Manufacturing

Natural and man-made cellulose fibre-reinforced poly(lactic acid) (PLA) composites: An overview about mechanical characteristics and application areas

Nina Graupner et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Polarization-sensitive optical coherence tomographic imaging of artificial demineralization on exposed surfaces of tooth roots

Chulsung Lee et al.

DENTAL MATERIALS (2009)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Platelet-rich plasma combined with a porous hydroxyapatite graft for the treatment of intrabony periodontal defects in humans: A comparative controlled clinical study

K Okuda et al.

JOURNAL OF PERIODONTOLOGY (2005)

添加到收藏夹

Article Mechanics

Characteristics of flow over two circular cylinders in a side-by-side arrangement at low Reynolds numbers

S Kang

PHYSICS OF FLUIDS (2003)

添加到收藏夹

Article Clinical Neurology

Comparison of plain radiographs with CT scan to evaluate interbody fusion following the use of titanium interbody cages and transpedicular instrumentation

RR Shah et al.

EUROPEAN SPINE JOURNAL (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.