☆ 4.6 Article

3D-Printed Polycaprolactone Implants Modified with Bioglass and Zn-Doped Bioglass

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Ceramics

3D printing of polycaprolactone/bioactive glass composite scaffolds for in situ bone repair

Chenglong Wang et al.

Summary: This study used bioactive glass to improve the bone repair scaffold material made of polycaprolactone (PCL) and found that increasing the content of bioactive glass can enhance the hydrophilicity of the scaffold, improve cell adhesion and proliferation, and promote bone repair. The results of the study suggest that PCL scaffolds containing 20% bioactive glass have great potential for clinical bone repair.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Materials Science, Ceramics

Microstructures and properties of polycaprolactone/tricalcium phosphate scaffolds containing polyethylene glycol fabricated by 3D printing

Kang Liu et al.

Summary: PCL/TCP/PEG composite scaffolds with PEG-coated TCP structure were prepared to improve the biological activity and hydrophobicity issues of PCL materials. The scaffolds exhibited good wettability, morphology, and mechanical properties, and promoted cell proliferation and osteogenic differentiation.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Chemistry, Physical

Rheological Characterization and Printability of Polylactide (PLA)-Alumina (Al2O3) Filaments for Fused Deposition Modeling (FDM)

Anton Smirnov et al.

Summary: This study presents the fabrication and printability analysis of ceramic-polymer filaments using FDM 3D printing technology. Rheological experiments show that as the ceramic content increases, the diameter and surface roughness of the filaments increase. 3D printed objects from the fabricated ceramic-polymer filaments exhibit lower print quality compared to commercial PLA filaments.

MATERIALS (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

The Influence of Graphene Content on the Antibacterial Properties of Polycaprolactone

Maciej B. Hajduga et al.

Summary: This study analyzed the impact of various additives on the antibacterial properties of a modified bioresorbable polymer, polycaprolactone (PCL). It was found that a small amount of graphene can effectively kill bacteria, especially Candida albicans and Staphylococcus aureus. However, a high content of graphene decreases the antibacterial properties and even leads to bacterial multiplication.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

添加到收藏夹

Article Chemistry, Physical

Injection Molding Process Simulation of Polycaprolactone Sticks for Further 3D Printing of Medical Implants

Krzysztof Formas et al.

Summary: The aim of this study was to simulate the injection molding process of polycaprolactone filament sticks for 3D printing of osteochondral implants. By importing thermal and rheological data to Solidworks Plastics software, the influence of various injection molding parameters on the geometry of filament sticks was investigated, leading to improvements in the injection process parameters.

MATERIALS (2022)

添加到收藏夹

Article

Three-dimensional printing of click functionalized, peptide patterned scaffolds for osteochondral tissue engineering

Jason L. Guo et al.

Bioprinting (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Large-pore-size Ti6Al4V scaffolds with different pore structures for vascularized bone regeneration

Chao Wang et al.

Summary: The study explored the optimal pore structure and size of Ti6Al4V porous scaffold for repairing large-area bone defects and promoting vascularization in the early stage of osteogenesis. The research found that as pore size increased, cell proliferation and viability also increased, with irregular pore sizes supporting stronger cell vascularization ability compared to regular pore sizes.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Review Cell & Tissue Engineering

The impact of Zn-doped synthetic polymer materials on bone regeneration: a systematic review

Siyi Wang et al.

Summary: At appropriate concentrations, Zn-doped synthetic polymer materials are better able to promote bone regeneration than materials without Zn. High doses of Zn2+ can lead to cytotoxicity and inhibition of osteogenic differentiation, while low concentrations promote cell proliferation and osteogenic differentiation. In vivo experiments have shown that Zn-containing materials enhance bone formation.

STEM CELL RESEARCH & THERAPY (2021)

添加到收藏夹

Review Cell & Tissue Engineering

Three-Dimensional Bioprinting Scaffolding for Nasal Cartilage Defects: A Systematic Review

Carlos M. Chiesa-Estomba et al.

Summary: This study conducted a systematic review on the role of 3D bioprinting scaffolding for nasal cartilage defects repair, with a focus on cellular sources, types of scaffold materials, biochemical evaluation, histological analysis, in-vitro and in-vivo studies, and animal models used. The results showed high heterogeneity in mechanical evaluation, common patterns of collagen expression in scaffolds, and potential limitations in the translational investigation due to heterotopic scaffold implantation and lack of quantitative histological data. Further research is needed to address these issues in the growing field of 3D bioprinting for nasal cartilage defects repair.

TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2021)

添加到收藏夹

Article Biophysics

Analysis of the antibacterial properties of polycaprolactone modified with graphene, bioglass and zinc-doped bioglass

Maciej B. Hajduga et al.

Summary: This study successfully prepared biomaterials with significant antibacterial effects against Staphylococcus aureus and Candida albicans by using modified polycaprolactone fibers with different additives, which can be applied in the field of implantology.

ACTA OF BIOENGINEERING AND BIOMECHANICS (2021)

添加到收藏夹

Article Otorhinolaryngology

Biomaterials in the Reconstruction of Nasal Septum Perforation

Izabella Rajzer et al.

Summary: The study focused on developing a septal cartilage implant biomaterial for reconstructing nasal septal perforations using 3D printing technology. By analyzing septal nasal cartilage samples from surgery patients and fabricating porous scaffolds with appropriate topography, geometry, and pore size, personalized implants were created for each individual patient. The study found that PLLA was the most useful material for achieving the desired implant features when using Fused Deposition Modeling (FDM) technology in 3D printing.

ANNALS OF OTOLOGY RHINOLOGY AND LARYNGOLOGY (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Sequential macrophage transition facilitates endogenous bone regeneration induced by Zn-doped porous microcrystalline bioactive glass

Xuan Bai et al.

Summary: The study found that zinc-containing microcrystalline bioactive glass can modulate macrophage transition, promote osteogenic differentiation of human bone marrow stromal cells, and show good cell adhesion and apatite formation in vitro. Animal models also confirmed that this scaffold can promote osteogenesis.

JOURNAL OF MATERIALS CHEMISTRY B (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Scaffolds modified with graphene as future implants for nasal cartilage

Izabella Rajzer et al.

JOURNAL OF MATERIALS SCIENCE (2020)

添加到收藏夹

Review Materials Science, Biomaterials

Bioactive Glasses: A Promising Therapeutic on Release Strategy for Enhancing Wound Healing

Tina Mehrabi et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)

添加到收藏夹

Article Materials Science, Biomaterials

Cu, Zn doped borate bioactive glasses: antibacterial efficacy and dose-dependent in vitro modulation of murine dendritic cells

Katharina Schuhladen et al.

BIOMATERIALS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Ceramics

Influence of zinc ions on structure, bioactivity, biocompatibility and antibacterial potential of melt-derived and gel-derived glasses from CaO-SiO2 system

Aleksandra Wajda et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2019)

添加到收藏夹

Article Engineering, Biomedical

Electrospun polycaprolactone membranes with Zn-doped bioglass for nasal tissues treatment

Izabella Rajzer et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)

添加到收藏夹

Article Materials Science, Biomaterials

3D Scaffolds of Polycaprolactone/Copper-Doped Bioactive Glass: Architecture Engineering with Additive Manufacturing and Cellular Assessments in a Coculture of Bone Marrow Stem Cells and Endothelial Cells

Xiaoju Wang et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Biomaterials

Preparation and characterization of PLA/PCL/HA composite scaffolds using indirect 3D printing for bone tissue engineering

Shadi Hassanajili et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

添加到收藏夹

Review Pharmacology & Pharmacy

Bioactive glasses entering the mainstream

Saeid Kargozar et al.

DRUG DISCOVERY TODAY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of porous structure and pore size on mechanical strength of 3D-printed comby scaffolds

Hongxia Zhao et al.

MATERIALS LETTERS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D-printed biodegradable gyroid scaffolds for tissue engineering applications

Loic Germain et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Review Engineering, Biomedical

Bioactive Glasses: Where Are We and Where Are We Going?

Francesco Baino et al.

JOURNAL OF FUNCTIONAL BIOMATERIALS (2018)

添加到收藏夹

Article Materials Science, Biomaterials

Polycaprolactone- and polycaprolactone/ceramic-based 3D-bioplotted porous scaffolds for bone regeneration: A comparative study

K. K. Gomez-Lizarraga et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

添加到收藏夹

Review Engineering, Multidisciplinary

Recent Progress in Cartilage Tissue Engineering-Our Experience and Future Directions

Yu Liu et al.

ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Ceramics

Gel-derived SiO2-CaO-P2O5 bioactive glasses and glass-ceramics modified by SrO addition

Michal Dziadek et al.

CERAMICS INTERNATIONAL (2016)

添加到收藏夹

Article Polymer Science

Polylactide/polycaprolactone asymmetric membranes for guided bone regeneration

Patrycja Domalik-Pyzik et al.

E-POLYMERS (2016)

添加到收藏夹

Review Materials Science, Ceramics

Bioactive glasses: Special applications outside the skeletal system

Francesco Baino et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2016)

添加到收藏夹

Article Materials Science, Biomaterials

An ultrasonic through-transmission technique for monitoring the setting of injectable calcium phosphate cement

Izabella Rajzer et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

添加到收藏夹

Article Polymer Science

Delayed degradation of poly(lactide-co-glycolide) accelerates hydrolysis of poly(ε-caprolactone) in ternary composite scaffolds

J. Idaszek et al.

POLYMER DEGRADATION AND STABILITY (2016)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Preclinical and clinical research on bone and cartilage regenerative medicine in oral and maxillofacial region

Tsuyoshi Takato et al.

ORAL SCIENCE INTERNATIONAL (2014)

添加到收藏夹

Article Engineering, Biomedical

How useful is SBF in predicting in vivo bone bioactivity?

T Kokubo et al.

BIOMATERIALS (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.